CATEGORIES

Scorpion HK-2206-5300 Motor

Scorpion HK-2206-5300 Motor

More Views

  • Scorpion HK-2206-5300 Motor
Our Price: $49.99

Availability: Out of stock


Product Code: HK-2206-5300


Be the first to review this product


Description

Product description

Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are N-50EH style, which are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.

This particular motor is specifically designed for the new smaller electric helicopters such as the Gaui Hurricane 200, and features a 2.3mm output shaft that fits the stock 2.3mm pinion gears. 

All Scorpion HK Series 22mm motors come with the new 2.5mm male Scorpion Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller, heatshrink to cover the bullet connectors and mounting screws. Since the HK series motors are primarily designed for Helicopter use, they do not include a prop adapter. 

Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

The Scorpion Motor Bearing Lubrication Kit is now available for maintaining the bearings in your helicopter motor. To view this product, please check out the Bearing Lubrication Kit.

If you need mounting screws for this motor, please check out our selection of Motor Mounting Screws.

For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

Specifications:

  • Stator Diameter ............................ 22.0 mm (0.866 in)
  • Stator Thickness ............................. 6.0 mm (0.236 in)
  • No. of Stator Arms .................................................. 9
  • No. of Magnet Poles ................................................ 6
  • Motor Wind ........................................... 24 Turn Delta
  • Motor Wire ....................... 8-Strand 0.21mm (31 AWG)
  • Motor Kv ........................................... 5300 RPM / Volt
  • No-Load Current (Io) ................... 2.12 Amps @ 6 volts
  • Motor Resistance (Rm) ............................. 0.031 Ohms
  • Max Continuous Current ............................... 18 Amps
  • Max Continuous Power ................................ 130 Watts
  • Weight ......................................... 34 Grams (1.21 oz)
  • Outside Diameter .......................... 27.9 mm (1.097 in)
  • Shaft Diameter ............................. 2.30 mm (0.091 in)
  • Body Length ................................. 22.6 mm (0.890 in)
  • Overall Shaft Length ...................... 32.6 mm (1.283 in)

Additional Information

Manufacturer INOVAT