 |
|
|
|
|
Futaba R168DP 8-Channel PCM Receiver 72MHz w/o Crystal
|
|
|
This is the Futaba R168DP 8-Channel 72MHz (channel 11-60) PCM 1024 Dual Conversion Receiver without Crystal. FEATURES: Narrow-band spacing and Dual Conversion signal filtering combine to provide exceptionally clear, interference-free reception and amazingly smooth, accurate control. |
|
|
|
- Requires: 72MHz Dual Conversion Receiver Crystal Low Band (11-35) or 72MHz Dual Conversion Receiver Crystal High Band (36-60)
- Specifications:
- Narrow Band: 20kHz Power Requirements: 4.8 to 6.0V (shared with servos)
- Dimensions: 1.1 x 2.2 x 0.79 inches (29.2 x 55.8 x 20.0mm)
- Weight: 0.85oz (24.2g)
- Note: 1024 Resolution is NOT Compatible with Older PCM 512 Systems.
|
|
|
|
|
|
|
|
|
|
|
|
Futaba S9256 Servo Digital Hi Speed/Torque
|
|
|
This is the S9256 Digital Servo used with the Futaba GY611 Gyro, FUTM0825. FEATURES: Aluminum case with heat sink to help cool motor Special servo for the GY611. Compatible with Super Narrow Pulse of (760µs) drive. Nylon gears One year warranty. INCLUDES: Four rubber grommets to isolate vibration. Four brass eyelets. Four phillips head self-tapping mounting screws. One large servo wheel 35mm in diameter. One star shaped (six arms) servo arm 32mm accross. One X-shaped servo arm 39mm across. One year limited warranty. |
|
|
|
- Requires: Radio system using Futaba J type connectors
- Specifications:
- Dimensions: 1.57 x .79 x 1.44 inches (40 x 20 x 36.5mm)
- Weight: 2.01oz (57g)
- Speed: .06 sec/60 deg @ 4.8V
- Torque: 47 oz-in (3.4 kg-cm) at 4.8V
|
|
|
|
|
|
|
|
|
|
|
|
S3115 Servo Micro Precision ROHS
|
|
|
|
|
|
By Futaba RC
|
|
|
|
This is the Futaba S3115 Micro High Torque Servo. This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps. FEATURES: Ideal for electric planes and small electric helis. INCLUDES: Futaba S3115 Micro High Torque Servo. One 1 inch (25mm) 4 arm servo horn (installed on servo). One 1.5 inch (39mm) 4 arm servo horn. One 1.75 inch (45mm) straight servo horn. One 1.4 inch (35mm) diameter round servo horn. Two eyelets. Two rubber grommets. Two 2x12mm washer head self threading screws (phillips head). |
|
|
|
- Specifications:
- Torque: 38.9 oz-in @ 4.8V (2.8 kg-cm)
- Speed: .15 sec/60 deg
- Dimensions: 1.1 x .51 x 1.16 inch (28 x 13 x 29.7mm)
- Weight: .60oz (17g)
- Lead Length: 6.5 inch (165mm)
|
|
|
|
|
|
|
|
|
|
|
|
NT8S700B Tx NiCd 9C 9CS 700mAh
|
|
|
This is a 9.6V, 700mAh Transmitter NiCad for the following Futaba Radios: 9C, 8U series, 7 NFK, 6DA, 6VA, 6NFK, 6NPK, 9VAP(S), 9VHP(S). INCLUDES: One Square 9.6V, 700mAh Transmitter NiCad Battery w/J Connector. |
|
|
|
- SPECS: Length: 4 inch (103mm)
- Width: 1-1/4 inch (31mm)
- Height: 1-1/4 inch (31mm)
- Weight: 195 grams
- Regular Charge Rate: 70mAh for 15 hours
- Fast Charge Rate: 210mAh for 5 hours
|
|
|
|
|
|
|
|
|
|
|
|
NT8JY Tx NiCd 9.6V 4NBL/BF/BP/3PJ 600mAh
|
| |
