This is the S9452 Digital Hi-Speed, Hi-Torque Servo and comes with J Connector Installed. This servo is designed to be used with 6V receiver packs and replaces the S9451. FEATURES: Digitally Enhanced Microprocessor Cut About 1/2 of the Response Time. From Transmitter Input To Servo Reaction. Coreless Motor with two ball bearings on output shaft. Metal Gears (to replace, use FUTM3432). High Torque. Case is Made of Black Plastic with newly developed mounting flanges. Dust and Water Resistant (Not Waterproof). One year warranty.
- Includes:
- Round Horn
- Two Rectangular Grommets
- Four Brass Bushings (eyelets)
- One Small Round Horn (already mounted on the servo)
- One Three Arm Horn
- Specs: Speed: .11 sec/60 deg @ 6V
- Torque: 127.8 oz-in @ 6V (9.2 kg-cm @ 6V)
- Weight: 1.76 oz (50g)
- Length: 1.57 inch (40mm)
- Width: 0.8 inch (20mm)
- Height: 1.32 inch (33.6mm)
GEAR SET
SERVO GEAR SET
FGS32SH GEARSET
BA FGS38 GEAR SET
SERVO CASE SET
SERVO CASE SET
SERVO CASE SET
SERVO CASE SET
SERVO CASE
SERVO CASE SET
SERVO CASE SET
SERVO EYELETTS
SERVO CASE SET
SERVO CASE SET
FST28V Vertical Tray S28/31S/38/48
SERVO GROMMETS
CASE SET
BA SPLIT GROMMET
SERVO GROMMETS
SERVO GROMMETS
S9257 Servo EP Heli Digital Rudder
This is the Futaba S9257 High Speed Digital Servo for Helicopter Gyro Operation. FEATURES: For use with the Futaba GY401 (FUTM0807 FUTM0808) and the GY502 gyros. Equipped with two ball bearings. INCLUDES: Futaba S9257 High Speed Digital Servo with 0.83 inch (21mm) diameter round horn 1.5 inch (39mm) diameter four-point horn 1.2 inch (32mm) diameter six-point horn mounting hardware. One year limited warranty.
- Specifications: - Length: 1.40 inch (35.5mm) - Width: 0.59 inch (15mm) - Height: 1.13 inch (28.6mm) - Weight: 0.9oz (26g) - Torque: 27.76 oz-in (2.0 kg-cm) at 4.8V - Operating Speed: 0.08sec/60 deg at 4.8V - Cord Length: 7.9 inch (200mm)
S3114 Servo Micro High Torque
This is the Futaba S3114 Micro High Torque Servo. FEATURES: Ideal for electric planes and small electric helis. INCLUDES: Futaba S3114 Micro High Torque Servo One .91 inch x .64 inch (23mmx16mm) 4 arm servo horn (comes pre-installed) One 1.33 inch x 1.33 inch (34mmx34mm) 4 arm servo horn.
- Specifications: - Torque: 23.5 oz-in (1.7 kg-cm) @ 6V / 20.8 oz-in (1.5 kg-cm) @ 4.8V - Speed: 0.09 sec/60 deg @ 6V / .10 sec/60 deg @ 4.8V - Dimensions: .86 x .43 x .78 inch (21.8 x 11 x 19.8mm) - Weight: .27oz (7.8g) - Lead Length: 6.5 inch (165mm)
Futaba S9551 Low Profile Digital High Speed/Torq Servo
- Torque: 92 oz-in. @ 4.8V, 136 oz-in. @ 6.0V
- Speed: 0.14 sec/60 deg @ 4.8V, 0.12 sec/60 deg @ 6.0V
- Dimensions: 1.6 x 0.8 x 1.0 in.
- Weight: 1.6 oz.
S3113 Servo Micro Mini RoHS
By Futaba
This is the Futaba S3113 High Speed Micro Mini Servo. FEATURES: Ideal for flat foamies and small electric helis. INCLUDES: Futaba S3113 High Speed Micro Mini Servo with universal connector 0.79 inch (20mm) diameter four point arm 1.6 inch (40mm) diameter four point arm 0.79 inch (20mm) diameter round horn mounting hardware. One year limited warranty.
- Specifications: - Torque: 16.7 oz/in (1.2 kg/cm) @ 4.8V / 20.8 oz/in (1.5 kg/cm) @ 6.0V - Speed: 0.11 sec/60 deg @ 4.8V / 0.10 sec/60 deg @ 6.0V - Dimensions: 0.86 x 0.43 x 0.80 inch (21.8 x 11 x 20.3mm) - Weight: .34oz (9.6g)
This is the Futaba 2.4GHz TM-8 Module for the 9C, 9Z, 8U and 7U systems. Futaba's FASST (Futaba Advanced Spread Spectrum Technology) transmits a large amount of information to the receiver at extremely fast speed. Simple plug-in installation-no transmitter modifications needed. Ultra fast channel shifting eliminates interference and eliminates the hassle of waiting for frequencies to open up. One year limited warranty.
- Includes: Futaba 2.4GHz Module with instruction manual and plastic module cover
- Requires: 2.4GHz FASST R608FS Receiver, FUTL7638
- Specifications:
- Communication Method: One-way operation system
- Transmission Antenna: Mono-pole
Futaba 2.4GHZ FAST R607FS 7CH Rx / TM-7 7CH Module
Now you can enjoy 2.4GHz benefits without buying a full 2.4GHz system and with features that only Futaba can offer.
This is the Futaba 2.4GHz TM-7 Module and R607FS 7-Channel Receiver for the 9C, 9Z, 8U and 7U Radio Systems. Futaba's FASST (Futaba Advanced Spread Spectrum Technology) transmits a large amount of information to the receiver at extremely fast speed. Simple plug-in module installation - no transmitter modifications needed!! Ultra fast channel shifting eliminates interference and eliminates the hassle of waiting for frequencies to open up. Dual Antenna Diversity - Futaba 2.4GHz FASST system seamlessly select the best reception between two receiver antennas, so there's no loss of signal. One year limited warranty.
- INCLUDES:
- Futaba 2.4GHz TM-7 Module (FUTL8927)
- R607FS 7-Channel Receiver (FUTL7637)
- Instruction manual and plastic module cover
- REQUIRES:
- Inserting module into transmitter and installing receiver in model
- SPECS:
- 2.4GHz TM-7 Module.
- Communication Method: One-way operation system
- Transmission Antenna: Mono-pole
- R607FS Receiver
- Reception Antenna: Dual
- Size: 1.6 x 1.1 x 0.35 inch (40 x 27 x 9mm)
- Weight without case: 0.25oz (7g)
Now you can enjoy 2.4GHz benefits without buying a full 2.4GHz system and with features that only Futaba can offer.
This is the Futaba 2.4GHz TM-7 Module for the 9C, 9Z, 8U and 7U systems. FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) transmits a large amount of information to the receiver at extremely fast speed. Simple plug-in installation-no transmitter modifications needed. Ultra fast channel shifting eliminates interference and eliminates the hassle of waiting for frequencies to open up. One year limited warranty.
- Requires: 2.4GHz FASST R607FS Receiver, FUTL7637
- Specifications:
- Communication Method: One-way operation system
- Transmission Antenna: Mono-pole
- COMMENTS: Also available with the R607FS 7-Channel Receiver in one part number - FUTL8950. In order to take full advantage of the FASST technology the FASST R607FS Receiver must be used with this module.
Futaba S3153 Micro/Mini Digital Servo HS ROHS
By Futaba RC
This is the S3153 Digital High Speed Micro Mini Servo. Designed for use with Futaba Radio Control Systems. This Servo is the Digital High Speed version of the S3103 Servo. This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries make sure they are capable of delivering sufficient amps. INCLUDES: One S3153 Digital High Speed Micro Mini Servo One Servo Accessory Pack (Horn Grommets Screws Bushings).
- Specifications: - Speed: 0.11 sec/60 deg @ 4.8V - 0.09 sec/60 deg @ 6V - Torque: 21 oz-in @ 4.8V - 23.6 oz-in @ 6V - Dimensions: 0.86 x 0.4 x 0.79 inch (21.8 x 10.1 x 20mm) - Weight: 0.32oz (9.1g)
HeliHobby.com is your source for Remote Control RC Helicopters, products, modifications and more. Full Range of Nitro, Electric and Micro Helis in stock
