 |
|
|
|
|
S3004 Servo Standard BB Bulk
|
|
|
|
|
|
By Futaba
|
|
|
|
This is the Futaba S3004 Light Weight, Ball Bearing Servo. This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps. FEATURES: Single ball bearing on output shaft. Precise tight fit throughout the geartrain. Being standard size and lightweight, it fits many applications. |
|
|
|
- SPECS:
- Speed: 0.23 sec/60 deg @ 4.8V, 0.19 sec/60 deg @ 6.0V
- Torque: 44.3 oz-in (3.2 kg-cm) at 4.8V, 56.8 oz-in (4.1 kg-cm) at 6.0V
- Length: 1.59 inch (40.4mm)
- Width: 0.78 inch (19.8mm)
- Height: 1.42 inch (36mm)
- Weight: 1.30 ounce (38 grams)
- Connector: J type with approx. 5 inch wire
- REQUIRES: Does not include any hardware (use FUTM3551 for the hardware)
|
|
|
|
|
|
|
|
|
|
|
|
Futaba S3003 Servo Bulk
|
|
|
|
|
|
By Futaba
|
|
|
|
This is the FUTABA S3003 STANDARD entry level Servo w/o Accessories. This servo can produce high current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps. Lightweight servo for use where a basic servo is needed. |
|
|
|
- SPECS: Speed: 0.23 sec/60 deg @ 4.8V or .19 sec/60 deg @ 6V
- Torque: 44.3 oz-in @ 4.8V or 56.8 oz-in @ 6V
- Size: 1.59 inch L x 0.78 inch W x 1.42 inch H (40.4x19.8x36mm) w/o output shaft
- Weight: 1.31oz (37.2g)
- Connector: J type with approx. 5 inch lead
- INCLUDES: One S3003 standard servo
- REQUIRES: Hardware (servo mounting screws, grommet, eyelets, servo horns) ,use FUTM3551 for accessory package.
- Radio system using Futaba J type connectors.
|
|
|
|
|
|
|
|
|
|
|
|
Futaba S3153MG Micro Digital Metal Gear Servo
|
|
|
|
|
|
By Futaba RC
|
|
|
|
This is the Futaba S3153 Micro Digital Metal Gear Servo. FEATURES: For small electric powered aircraft models. One year warranty. INCLUDES: Futaba S3153 Micro Digital Metal Gear Servo with J-connector, 0.79 inch (20mm) diameter four point servo horn, 0.79 inch (20mm) diameter round horn, 1.6 inch (40mm) diameter four point servo horn, servo mounting hardware and instruction and warranty sheets. |
|
|
|
- Specifications:
- Torque: 19 oz-in @ 4.8V, 24 oz-in @ 6V
- Speed: 0.11 sec/60 degree @ 4.8V, 0.11 sec/60 degree @ 6V
- Size: 0.9 x 0.4 x 0.8 inch (21.8 x 11 x 20.3mm)
- Weight: 0.32oz (9.6g)
- Lead Length: 6.7 inch (170mm)
|
|
|
|
|
|
|
|
|
|
|
|
SERVO GEAR SET
|
|
|
|
SERVO GEAR SET
|
|
|
|
SERVO GEAR SET
|
| |
