This is the Futaba 2.4GHz TM-14 Module and R6014FS 14-Channel Receiver for the 14Z, 12Z and 12FG Radio Systems. The software of the 50MHz and 72MHz 12FG, 12Z and 14MZ systems must be updated prior to installing this module. A Memory Card is required, see REQUIRES below for Memory Card type. FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) transmits a large amount of information to the receiver at extremely fast speed. Simple plug-in module installation-no transmitter modifications needed. Ultra fast channel shifting eliminates interference and eliminates the hassle of waiting for frequencies to open up. Dual Antenna Diversity- Futaba 2.4GHz FASST system seamlessly selects the best reception between two receiver antennas, so there's no loss of signal. One year limited warranty.

This is the Futaba S3114 Micro High Torque Servo with Micro Plug. Ideal for electric planes and small electric helis Nylon gears. INCLUDES: Futaba S3114 Micro High Torque Servo with Micro Plug One .91 x .64 inches (23mmx16mm) 4 arm servo horn (comes pre-installed) One 1.33 x 1.33 inches (34mmx34mm) 4 arm servo horn.

This cool gadget displays voltage and charge level Discharge function has current load adjust from 1-3 (slow to fast) amps Red (danger) orange (caution) and blue (safe) zones on the circular graph clearly indicate voltage status Auto shut off and built-in fan Accepts Futaba J style input plug Uses receiver package voltage to operate Can be used with 4.8 6.0 and 7.2V packs (not with 8.4V or 9.6V TX) One year limited warranty. Use the BR-2000 battery checker in your workshop and at the flying field to check or discharge 4- 5- or 6-cell Ni-Cd and NiMH battery packs. It features a large easy-to-read LCD that has numeric and graphic (a gas tank) displays to show voltage. Housed in a sturdy plastic case that has retractable legs the easy-to-use unit has a start button on the front panel. On one side are the discharge-current adjustment dial (1 to 3 amps) the battery-voltage selector (4.8 6 or 7.2) and the battery connection port. An adjustment screwdriver and a battery connection lead with Futaba connectors are part of the package. To use the checker simply select the proper voltage connect the pack and press the start button. The voltage will be displayed (red background) for about 20 seconds. To switch to the discharge function hold the start button down for 3 seconds. The unit's internal cooling fan will start and the indicator will display the discharge voltage (blue background).