 |
|
 |
 |
|
Futaba R616FFM 2.4GHz FASST Micro Parkflyer Rx 6CH
|
 |
|
This is the Futaba R616FFM 2.4GHz FASST 6-Channel Receiver. Compatible with the following FASST transmitters. 6EX, 7C, and the following transmitter modules. TM7, TM8 (on 7 channel mode), TM10 (on 7 channel mode) and TM14 (on 7 channel mode). FEATURES: Designed for use with park flyers or indoor aircraft. Compatible with micro connectors only. Easy one touch linking to transmitter. One year limited warranty. |
|
|
|
- Specifications:
- Dimensions: 1.5 x 0.9 x 0.3 inches (38 x 22 x 7mm)
- Weight: 0.22oz (6.3g) with case
- 0.14oz (4.0g) without case
- Power Requirement: 4.8V- 6.0V battery or regulated output from ESC
- F/S and Battery F/S function (for channel three)
- Battery F/S Voltage: 3.8V
- Current Drain: 75mA (w/no servos) with or without signal.
- Approximate range of 1000 ft.
|
|
|
|
|
|
|
|
|
 |
 |
|
CAMPAC8 Data Storage Module 16K 8U 9C 9CS 3PK 3PJFS
|
 |
 |
|
3693 Futaba Universal Carrying Bag
|
|
|
 |
 |
|
For all transmitters
|
|
 |
|
The Futaba Carrying bag comes with five sheets of foam that are scored in one-inch squares modelers simply remove squares as needed to create a customized space to form-fit a radio charger engine or any other hobby accessory. Exterior is made of durable nylon with webbed support padding front and back and a secure double-pull zipper. A Velcro-secured pouch on the inside flap keeps small items within easy reach. Includes an adjustable shoulder strap and carrying handle. This is the Futaba Universal Gear Bag. Customized storage and carrying for radios chargers engines and more. Made from tough nylon and reinforced with sturdy 1 inch webbing Bag closes securely with a double-ended zipper. Features five 10x 12 inches (255 x 305 mm) sheets of foam padding which are die-cut for easy removal and custom shapes. Includes padded bottom and lid. Has hook and loop-sealed 4.5 x 6.7 inches (115 x 170 mm) pouch provides safe easy storage for cords crystals and other accesories. |
|
|
|
- Length: 12 inches (305mm) Width: 10-1/2 inches (266mm) Height: 5 inches (127mm)
|
|
|
|
|
|
|
|
|
 |
 |
|
Futaba Original Channel Transmitter Bag
|
|
|
 |
 |
|
For all transmitters
|
|
 |
|
The Futaba original tx carrying case is ideal carrier for protecting valuable 2-stick airplane / helicopter systems. Safety and convenience features include a double-zipper top flap carrying handle exterior side pocket and an interior antenna holder. Made of durable waterproof vinyl in black with the Futaba logo embroidered in red. Can also be used to hold Futaba 2-channel pistol radios. |
|
|
|
- Dimensions: 10 x 9 x 4.75 in (254 x 229 x 121mm)
|
|
|
|
|
|
|
|
|
 |
 |
|
S131 SERVO
|
 |
 |
|
S134G RETRACT SERVO
|
| |