 |
 |
|
|
|
|
|
|
|
|
|
|
Free Shipping on US orders over $100
|
|
|
|
see product description for exceptions on certain oversized items
|
|
|
|
<< < 1 2 3 > >>
Page 2 of 3
|
|
|
|
|
Servo Gear Set for the HS-65HB servos
|
|
|
|
|
|
Direct replacement
|
|
|
|
Servo Gear Set for the Micro HS-65HB servos. This is a direct replacement so now you can easily fix an existing servo and not have to replace it. |
|
|
|
|
|
Servo Gear set HS-81
|
|
|
This is the Replacement Gear Set for the Hitech HS-81 servo.
This is a complete gear set. FEATURES: All White Plastic gears. REQUIRES: Assembly into HS-81 servo.
|
|
|
|
- INCLUDES: One 1st gear
- One 2nd gear
- One 3rd gear
- One final gear
- One servo horn screw
|
|
|
|
|
|
|
|
|
|
|
|
Servo Horn set for HS-56
|
|
|
This is the Horn Set for the Hitec HS-56HB Servo. FEATURES: White nylon construction. REQUIRES: Installing on HS56HB servo.
|
|
|
|
INCLUDES: One single armed horn 1.01 inch (25.7mm) long
One double armed horn 1.4 inch (35mm) long
One x shaped horn 0.94 inch (24mm) long
|
|
|
|
|
|
|
|
|
|
|
|
Servo Gear set HS-55
|
|
|
This is the Gear Set for the HS-55 servos from HiTec. FEATURES: White plastic gears, includes all gears for the servo. INCLUDES: Five white plastic gears.
|
|
|
|
|
|
Hitec HS-5085MG Digital Mighty Micro BB MG Servo
|
|
|
This is the HS-5085MG programmable, digital micro servo from Hitec. Features: Programmable, Overload Protection, Metal Gears Applied, Light Weight. Applications: Electric Helis, Small Planes, Gliders, 1/16, 1/18 Cars. |
|
|
|
- Specifications:
- Speed: 0.17sec/60 deg @ 4.8V, 0.13sec/60 deg @ 6.0V
- Torque: 3.6kg-cm(50.0oz-in) @ 4.8V, 4.3kg-cm(59.71oz-in) @ 6.0V
- Weight: 21.9g (0.77oz)
- Size: 29 x 13 x 30mm (1.14 x 0.51 x 1.18in)
|
|
|
|
|
|
|
|
|
|
|
|
Switch Harness w/Battery Box
|
|
|
|
Servo Gear Set Metal HS-85
|
|
|
|
Servo Extension 36 Inch Heavy Duty FUT
|
|
|
|
Hitec HS-5245MG Digital Mini Servo
|
|
|
This is the Hitec HS-5245 Metal Gear Ball Bearing Digital Super Torque Mini Servo with the Universal Futaba J, Hitec S, JR and Airtronics Z Connector. Suitable for small medium and sport planes, gliders, .30 size helicopters, and cars. FEATURES: Dual ball bearings. Digital and MOSFET amp programmable (see COMMENTS). Indirect drive potentiometer for long life. Narrow dead band width and high standing torque. |
|
|
|
- Includes: One Hitec HS-5245 Metal Gear Ball Bearing Digital Super Torque Mini Servo with the Universal connector, four rubber grommets, four eyelets, one star shaped, one arm, and two arm straight nylon servo horns, one aluminum servo horn.
- Specifications:
- Wire color codes: Black-Ground, Red-Power, Yellow-Signal
- Operating speed: 0.15 sec @ 60 deg at 4.8V
- Torque: 61 oz-in (4.4 kg-cm)
- Weight: 1.12oz (32g)
- Length: 1.27 inches (32.4mm)
- Width: 0.66 inches (16.8mm)
- Height: 1.21 inches (30.8mm)
- Wire length: 12 inches (305mm) approximate
- Comment: In order to program the Fail-Safe on this servo, modeler will need to purchase the Hitec Field Programmer, HRC44410.
|
|
|
|
|
|
|
|
|
|
|
|
Female Connector JR/RCD
|
|
|
|
Servo Extension 36 Inch Heavy Duty JR/S
|
|
|
|
Servo Gear Set Metal HS-81
|
|
|
|
Y-Harness 12 Inch Heavy Duty
|
|
|
|
50 3-Color Hvy Gauge Servo Wire
|
|
|
|
Male Servo Connector FUT
|
|
|
|
Switch w/BEC Cord Surface
|
|
|
|
Male Servo Connector JR/RCD
|
|
|
|
Y-Harness 6 Inch Heavy Duty
|
|
|
|
Batt Box w/BEC RX Conn w/7201 Harn
|
|
|
|
Switch Harness JR/RCD
|
|
|
|
Switch Harness FUT
|
|
|
|
Battery Box 72MHz RX System
|
|
|
|
TX Charge Cord
|
|
|
|
Karbonite Gear Set HS-56HB
|
|
|
|
|
|
<< < 1 2 3 > >>
Page 2 of 3
|
|
|
 |
|
|
|
Call us: 1-818-996-6551
|
|
|
HeliHobby.com Inc 2001 - 2009 Copyrights ©
7751 Alabama Ave Ste. 11
Canoga Park, CA 91304
(818) 996 6551
|
|
|
|
|
Authorized HeliHobby Distributor
eHobbyHouse Store front
17721 Vanowen st Reseda, CA 91335
(818) 609 1968
|
|
|
|
|
|
|
HeliHobby.com is your
source for Remote Control
RC Helicopters, products,
modifications and more.
Full Range of Nitro, Electric
and Micro Helis in stock
|
|
|
|
|
|
