This is the Hitec Supreme II Universal Flight Pack with Supreme IIS Receiver, four HS-425BB Servos, 600mAh NiCd Battery and Switch Harness. Designed for modelers who want to use a single radio transmitter to fly several different model aircraft. Especially pilots utilizing computerized radios with multi-model memory. FEATURES: 8-channel autoshift receiver is compatible with all modern FM transmitters. Dual ball bearing standard size servos with universal connectors, extra servo horns and mounting hardware, 600mAh 4.8V flat receiver NiCd battery.
- SPECS:
- Supreme IIS Receiver:
- Size: 2 inch x 1.26 inch x 0.79 inch (51 x 32 x 20mm)
- Weight: 1 oz (28.5g)
- HS-425BB Servo:
- Length: 40mm (1.6 inch) Weight: 45.5 g (1.6 oz)
- Width: 20mm (0.74 inch) Speed: 0.21sec/60 deg at 4.8V
- Height: 36.5mm (1.4 inch) Torque: 46 oz/in (3.3 kg/cm)
- 4.8V Battery:
- Number of Cells: 4
- Length: 2.2 inch (56mm) Weight: 3.2oz (90g)
- Width: 2 inch (50mm) Wire Length: 4.4 inch (111mm)
- Thickness: 0.57 inch (14.5mm)
Hitec HS-45HB Feather Premium High Speed/Torque Servo
By Hitec RC
Hitec's HS-45HB offers the economy and durability of our other famous micro servos, but now with a ball bearing supported output shaft and high impact Karbonite gears. FEATURES: Slim case with 2mm thick mount support. Motor Type: 3 Pole. Bearing Type: Top Ball Bearing.
- INCLUDES:
- One Servo with X horn and mounting screws
- Additional X horns and also a long servo horn
- Specifications:
- Size: 23.6 x 9.8 x 22.4mm (.92 x .38 x .88)
- Output Torque: 1.0Kg-cm (13.88oz-in) at 4.8Volt
- Operating Speed: 0.14 sec/ 60°at 4.8Volt
- Weight: 8g (0.28oz)
This is a 9 volt, 600mAh Transmitter Battery Pack for the Hitec Eclipse 7, Prism, Flash, Lynx FX, and (optional Focus SS series Radios. FEATURES:
White 2-pin connector. Rectangle 8-cell pack.
- SPECS:
- Length: 3-7/8 inch
- Width: 1-1/16 inch
- Height: 1-1/16 inch
HS-6965HB Karbonite Digital Coreless Servo
Standard Size Servo
The HS-6965HB Karbonite Digital Coreless servo is a standard size programmable servo. Use it for cyclic control as the Karbonite Gears are ultra smooth and still very strong. The servo comes with the standard Hitec/Futaba connectors. Overall torque is 111 oz-in and speed of 0.08 Sec/60 Degrees.
- Control System: +Pulse Width Control 1500usec Neutral
- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Amplifier Type: Digital Amplifier and Mosfet Driver
- Operating Voltage: 4.8-6.0 Volts
- Operating Temperature Range: -20 to +60 Degree C
- Operating Speed (4.8V): 0.10sec/60 degrees at no load
- Operating Speed (6.0V): 0.08sec/60 degrees at no load
- Stall Torque (4.8V): 92 oz/in. (6.6kg.cm)
- Stall Torque (6.0V): 111 oz/in. (8.0kg.cm)
- Operating Angle: 40 Deg. one side pulse traveling 400usec
- 360 Modifiable: Yes
- Direction: Clockwise/Pulse Traveling 1500 to 1900usec
- Current Drain (4.8V): 3mA/idle and 200mA no load operating
- Current Drain (6.0V): 3mA/idle and 240mA no load operating
- Stall Current (4.8V): 2400mA
- Stall Current (6.0V): 3000mA
- Dead Band Width: 2usec
- Motor Type: Coreless Metal Brush
- Potentiometer Drive: 6-Slider, Indirect Drive
- Bearing Type: Dual Ball Bearing
- Gear Type: Karbonite Heavy Duty Resin
- Connector Wire Length: 11.8inch (300mm)
- Connector Wire Gauge: 22AWG
- Connector Wire Strand Count: 60EA
- Dimensions: 1.60inch x 0.80inch x 1.50inch (40 x 20 x 37 mm)
- Weight: 1.83oz (52.1g)
Charge Plug Laser Flash Eclipse
Tx Antenna Prism Eclipse
Trainer Cord 1 Way HRC-HRC-FUT
Transmitter Dry Battery Holder LYNX AM and FM FOCUS 2 and 3 FLASH LASER 4 and 6 Eclipse 7 and PRISM...
HeliHobby.com is your source for Remote Control RC Helicopters, products, modifications and more. Full Range of Nitro, Electric and Micro Helis in stock
