 |
|
|
|
|
Mixeron Sub Micro Heli 3-in-1 Mixerboard
|
|
|
|
|
|
Used in ultra light and brush motor powered helicopters.
|
|
|
|
The 3 in 1 Mixeron MixerBoard integrates the single rate Gyro, Revo mixing and the two ESCs of main and tail motors on Sub Micro Helis such as the HeliStar, Precision MicroHeli FP / CP and others. Through this board you can easily adjust the Gyro's sensitivity, mixing rate and rudder stick revolution rate. Also it provides low voltage indicator and lowest voltage auto shutdown mechanism. Works with both 2 and 3 Cell lithium packs. |
|
|
|
- Pre wired with Micro connectors
- Very reliable
- Works with Lithium packs
- Ultra light and small for Sub Micro Helis
- Main ESC output max: 5A
- Tail ESC output max: 3A
- 3 Cell Low volt Indicator: 10V
- 2 Cell Low volt Indicator: 7V
- 3 Cell Low volt Auto Shutdown: 9V
- 2 Cell Low volt Auto Shutdown: 6V
- 5V BEC Max: Current 1A
- Weight: 7g
- Size: 20mm x 25mm x 10mm
|
|
|
|
|
|
|
|
|
|
|
|
Sub Micro 6 channel receiver
|
|
|
|
|
|
For Hand Held and Palm size Sub Micros
|
|
|
|
This receiver is very light, it only weighs 3.8g/0.13 oz even include all connector sockets which wotk with the Sub Micro servos and ESCs. Antenna has a length of 450mm. This receiver compatible with all PPM transmitters with Futaba Shift. Requires a Micro crystal such as the GWS Sub Micro crystals. Perfect for Sub Micro Helis such as the Precision Micron, Dexterity, HeliStar and others. |
|
|
|
- Range of Input Voltage: 10-15V DC;
- Consumed Current: <50Ma;
- Output Current: 150mA, 250mA, 350mA, 450mA, and 550mA for choice
- Cut off method: intelligently automatic voltage check
- Chargeable Batteries: 2 cells (7.4V) and 3 cells (11.1V) Li-Poly battery;
- Size: 70x45x17mm;( 2.75x1.77x0.67in)
- Weight: 49g.(1.72oz)
|
|
|
|
|
|
|
|
|
|
|
|
Sub Micro Heli 2-in-1 ESC
|
|
|
|
|
|
For Palm Size Sub Micro Helicopters
|
|
|
|
These Speed controlled designed for use in Helis operating with brushed motors. It features a soft start which enables this speed controller to be suitable for R/C Helis. Includes MCU decoder with fine resolution with 1024 steps. Also includes BEC, Safe power on, soft start, auto cut and much more. Size is only: 18mm x 12mm x 6mm. Control two motors and comes with Micro white connectors as well as JST battery connector. Perfect for Dexterity, HeliStar and others. |
|
|
|
- Size: 18mm x 12mm x 6mm
- Weight: 6.6g
- Auto cutoff: 4.2V Ni-MH 5-8 Cells
- Current: 3A
|
|
|
|
|
|
|
|
|
|
|
|
Sub Micro 150mAh 11.1V Li-poly Battery
|
|
|
|
|
|
For Sub Micro Palm size Helis
|
|
|
|
This ultra light and small pack is a 3 cell ( series ) 150mAH 11.1V pack. Its only 35 long x 30 wide x 13 height. Perfect for Sub Micro hand held / Palm size Micro Helis such as the HeliStar, Precision Micron or Dexterity Blue Arrow. Comes with both a balancing lead and BEC / JST red connector. |
|
|
|
- Comes with BEC / JST connector
- Ultra small
- Size: 35L x 30W x 13H
|
|
|
|
|
|
|
|
|
|
|
|
Nano Sub Micro Gyro
|
|
|
|
|
|
For sub micro helis
|
|
|
|
The world's smallets Gyro. | | | |
