This ferrite ring will help keep unwanted electrical noise out of your servo. It is also a great way to shorten servo wires in a neat manner. The ring is 2.5 grams and can handle as many as 5 turns of 28ga servo wire. That is about 4 inches! Smaller wire can generate more turns. To wrap the wire, simply remove the 3 pin servo connector by lifting up on the plastic pins with a hobby knife. Gently pull out the wire. Thread the metal connectors through the ring as many times as you wish. For more glitch supression, please consider the Dionysus Design glitch reducer (DD-GLRD-PKG-01) which uses DSP filtering to always generate a clean signal.

The T-Rex is such an awesome Helicopter, the only complain you will hear from pilots is that they keep on stripping the soft aluminum stock screws and heads. Both the stock Phillips ( X / XL ) and stock socket ( SE ) heads are made of soft aluminum and will easily strip out when taken in and out of the various plastic and aluminum parts, especialy after a crash when part bind. This custom 95 hard socket head screw kit from HeliHobby will replace all screws with these high quality metric screws which will never strip or break. The hardened screws also come with our custom ultra thin heads which will fit inside the cavity of the XL plastic frames. These screw pack are simply a must have and we recommend them to all T-Rex 450 pilots. Fixing is made easy and convenient with this 95 custom screw pack.

Crash resistant landing gear strut for the T-Rex 450 from JCS Hobbies designed due to the many requests made for an upgraded gear strut that does more than just collapse on extreme hard landings. Their in house testing with repeated drops straight down from over 6 feet showed no damage whatsoever to the strut. There are also holes for an antenna mounting tube between the skid mount holes and the first structure opening. If you are looking for a gear strut that will take the abuse of hard landings without fail, then you have found your product.

This is a Red-White-Blue Foam Blade Holder for the Helimax MX400 and other mini sized helicopters such as the T-Rex Superior Edition. Fits snugly onto the tail boom and then the blades slide into it to keep them firmly in place. This blade holder is stronger and thicker than most others Micro Blade Holders so it allow for greater holding power of both the main rotor blades as well as the onto the tail boom !!!