Stand out in the crowd with this real cool looking carbon fiber woven simulated canopy and windshield. The complete canopy comes with windshield installed. The windshield by itself is intended to be used with the stock white plastic canopy which creates a very nice contrast ( white body with black woven CF windshield ).
Trex 450X Metal Tail Holder Set
Ships pre assembled
CNC Metal Tail Rotor Upgrade from Align with main hub assembly and blade grips (tail shaft not included). Removes the flex and play which is common with the stock plastic tail rotor assembly and grips and holds very well under any tail 3D load. Greatly increases pitch control accuracy.
- Extremely rigid CNC aluminum alloy holder and T-type hub
- Pre-assembled with the precision ball-ends as shown in the picture
- Shaft not included
- SPECS/INCLUDES:
- Stainless steel tail rotor hub x 1
- 3x3 Set screw x 1
- Metal tail rotor housing x 2
- Bearing MR62ZZ x 2(2x6x2.5mm)
- Bearing MR52ZZ x 2(2x5x2.5mm)
- Washer x 2(2x3.8x1mm)
- Collar screw x 2(M2x8)
- Screw x 2(M2x9)
- Stainless steel linkage ball x 2
- Cross screw x 2(M2x6.5)
T-Rex Mini Helicopter Pitch Gauge ( AGNH1000 / K10180TA )
Aluminum Main Rotor Holder Grip Set Blue HS1065
Trex 450X Tail Drive Belt NOT for S, SE, SE V2
Tail Drive Gear Metal Pulley Assembly
SEV2 Complete Carbon Fiber Frame Silver
Perfect crash kit item!
This is a replacement Carbon Fiber frame set in silver for the Align 450SE V2. It comes 90% assembled and includes the new tail drive gear assembly and anti rotation bracket. This is perfect to have on hand if you fly hard and want to feel confident you will always have the parts on hand to repair your helicopter. With this you can perform a frame swap and repair your other frame without downtime.
- one carbon battery mounting plate
- Two upper silver CF frames
- Two lower silver CF frames
- One aluminum battery mount
- Ten 5X2X7.5mm aluminum links
- Two aluminum bolts
- Eight 2x8mm Socket button head screws
- Two 2x9mm Collar screws
- One 8x4.8mm Metal pulley cover
- One 8x2.65mm Metal pulley cover
- One 8x2.65mm Metal drive pulley
- Two 3x8x3mm MR83ZZ Bearings
- One 3x27mm Tail drive gear shaft
- One Tail drive gear (25T)
- Two canopy mounting bolts
- Forty six 2x3.5x5x2mm special washers
- Two Metal main shaft mounts
- Two 5×11×5mm 685ZZ Bearings
- One Metal motor mount
- Six Plastic nuts
- One Metal tail boom stiffener(L)
- One Metal tail boom stiffener(R)
- Two Metal upper bearing case
- One Metal lower bearing case
- Six Aluminum bolts
- One Bottom plate
- One Anti rotation bracket
- Three 2x4mm Cross screws
- Thirty 2x6mm Socket button head screws
- Ten 2x14mm Socket button head screws
- Four 2x6mm Socket button head screws
Main Frame Set
Tail Drive Gear Assembly
Tail Drive Gear Assembly XL
Landing Skid Set with antenna pipe ( HS1014-1 / AGNH1148W )
