This all CNC upgrade replaces the complete stock plastic gear box with an after market quality aluminum part. The gear box comes completely assembled and ready to be installed ( just as you see in the picture ) and will tremendously help eliminate play and flex produced by plastic. The part comes pre installed with both the pulley and tail shaft and so installation is a breeze. Super smooth bearings and very attractive make this upgrade one of the hottest modifications for the Trex 450XL.

Super smooth Super strong and light carbon main rotor blades for the T-Rex. These blades come pre installed with a brass sleeve for a tight installation through the main rotor blade grips. The blades are balanced and will produce much greater flight capabilities when compared to the stock wood blades !!!

Keep your 400 size motor running cool and efficient. These heat sinks are especially useful as they are 1/2 size ( not full circle ) making them an easy fit on most Helis. For example on the Trex you can easily install it as the side frames will not interfere with it.

Another version motor cooling plate this version is made by Align and should be used on most Micro Helis such as the Trex and Zoom to allow further heat to disperse off the motor.

Now you can convert your Trex 450X into a true side frame eCCPM setup. The setup resembles a bit the Raptor .90 frame configuration as the two side frames are laid on top with a total of 4 frames which make up the conversion. This design allows for a true CCPM direct servo link setup with no indirect linkages allowing for true servo hold and CCPM servo to swash setup. All screws are capped using precision anodized blue spacers which are both attractive as well as useful as they increase the support of the screw head against the frame. This unique side frame conversion kit comes complete will necessary hardware which includes all plastic parts and aluminum mounts which are placed in between the two sandwiches plates which make up for this real cool conversion side frame kit. The kit was designed around the Trex 450X but can easily be modified and used on the XL series of Trex Helis.

This pitch gauge is a high quality Micro Heli Pitch gauge which has engraved degrease right on top of the upper plate so you may easily and accurately set your preferred pitch settings. Manual included in kit. This Pitch gauge measures up to 10 degrease ( which is plenty for Micro Helis ) and includes a self adjusting blade holding lever as well as a locking button for a more comfortable setup.