PU adhesive gel is a material that possess excellent vibration dampening characteristics, ideal for mounting gyroscopes, receivers, or other electronics in vibration prone areas. The gel can be re-used by cleaning off containment (such as dust) with water. Mild detergent can also be used to wash away oily residues. Once dried the gel will regain its adhesiveness. The PU adhesive gel is an ideal replacement for traditional gyro foam tape. Its excellent vibration dampening characteristic can minimize impact induced damages on electronics.

This solder is not only great for hobby projects but all electrical applications. The melting temperature for this solder is 374 degrees Fahrenheit.

Xtreme Double PSA Strap is similar to our Single PSA Strap, but is designed to accommodate larger batteries and electronics. This Xtreme Double PSA Strap is designed with (2) ¾ Velcro® straps and a 5 adhesive back mount. Made from industrial strength Velcro and adhesive, to adhere to almost any surface. Package includes 1 Xtreme Double Strap, printed on both sides for use in any direction.

Lubricate ball bearings one-ways etc. Eliminates vibration and binding of metal parts. Ultra-smooth for RC helicopter applications. 25 ml. From Ikarus.

Multi purpose rubber bands. May be used for many applications in this amazing hobby including holding batteries down to the Helicopter's chassis mounting foam protectors and other uses. The kit comes with 50 thick rubber bands in three different colors !!!

Multi purpose Tri-Flow superior lube with Teflon in 2 oz bottle ideal for all the ball links used in radio controlled Helicopters. Useful on any parts that are moving and can use extra help to smooth things out. Use in bearings and in servo horns. Liquid version can be injected onto the smallest joints. Definitely a useful bottle to carry in your tool box. Comes with a thick cap to prevent spillage.

Bob Dively Models Liquid Masking Film (LMF) is the industry standard copied but never duplicated. Liquid Masking Film is a sprayable, strippable coating to mask and protect the finish when applying trim colors, letters, insignias, etc. on model aircraft, boats, cars and trains. It's a safe, non-toxic, non-flammable liquid that replaces tape on complicated masking jobs. Tight radius curves can be easily made even on curved surfaces. Leaves sharp, clean paint lines. Masks on any non-porous surface or finish. Can be sprayed, brushed or rolled on. LMF air dries in 1 to 2 hours. Drying can be accelerated with warm air. Trim design may be drawn on LMF when dry with a ball point pen. Score with a new X-acto knife and peel off areas to be painted (thin areas won't peel). Plastic bottle with a metal screw-on lid. Directions on bottle.

This thin Multi Purpose double sided tape is perfect to mount servos ( for added support and shock absorption ) receiver support Gyros and other accessories. The roll is easy to use since you can easily cut just the right piece for the job. Actual tape color is black and is made with very strong adhesive solution for added strength and agility.

The all purpose Velcro tape comes with both male and female sides and best of all each strip comes with a pre-adhesive side so you can easily stick it to batteries receivers speed controllers and other components. The most common usage with Micro Helis is to hold lithium batteries using Velcro for easy mounting and dismounting of the battery pack.

Dubro foam rubber protects fuel tanks insulates speed controls protects your radio gear and much more. RC Helis vibrate extensively and protecting from vibration in many different locations is a must. Excellent price and easy installation. Available in several sizes and configuration thick and thin. The foam sheet can be easily cut to size and it is very soft and shock resistance.

A Motor's heat sink needs to have excellent conductivity in order to transfer heat from the main motor body onto the installed heat absorbing device. This heat sink compound insures this conductivity may be maximized with its unique formula which allows for the heat to disperse rapidly and with maximum efficiency. This is the same material many use in computer CPU fans.

The Pro 30 minute epoxy features an accurately controlled and consistently reliable 30-minute curing time. Never have to worry about the tip of the bottle hardening ( like super glue sometimes does ) as the formula comes into effect only once both bottles are mixed to create the final formula. Kit includes one 4.5oz bottle of resin (Clear) and one 4.5oz bottle of hardener (Yellowish).

Perfect adhesive for final assembly on foam model aircraft or fuselages. Odorless and non-fuming and compatible with Pro CA Activator. Medium formula is gap filling and cures in 10-15 seconds.

This After Run Oil is a low-cost investment in prolonging Glow Powered engine. Every modeler who owns a Nitro powered engine should have After Run Engine Oil. It's ideal for protecting an engine during winter storage keeping it in great running condition for the spring. Keep your engine running like new and protect bearings and vital parts from rust and corrosion. Also this oil helps prevent varnish and gum buildup and ultimately makes your engines easier to start and perform better. Comes packaged in a convenient 2 oz. bottle

Do you get frustrated when trying to apply adhesives oil and grease to hard to reach places well search no more. For example this is a perfect tool when applying grease to a tail gear box. The inexpensive Hobby Syringe dispenses up to 12cc of almost any type of oil grease fuel or adhesive—ideal for many hobby or household projects. Great for model maintenance involving shock oil machine oil air filter oil and diff greases or for filling small 1/2A aircraft fuel tanks . Also can be used when building model airplanes or craft projects that require wood glue or epoxy and can also precisely apply model cement for plastics. Tip is curved to easily reach tight spaces and can be trimmed back to enlarge the opening for dispensing thicker product such as epoxies or greases.

Great for any moving parts in the helicopter that needs extra lubrication. Specific application include ball bearings one way shafts tail sliders and more. The micro oiler syringe will allow you to apply the precise amount of oil to a specific area.

This universal servo gear lubricant was specifically developed to be applied to internal servo gears of all kinds and ball bearings of all kinds. The Hitec lubricant is none conductive so it will not damage the inside electronics of your servo and yet allow for the smoothest operation of your servos. Servos play a major role in the overall performance of your aircraft and keeping them working in maximum capacity is of major importance.

J-B Weld is an amazing formula which once binds will produce an ever lasting strong bind which will hold tight and not come loose. Often used on mount pinions to a motor's main shaft. The pinion will not slip or fall once J-B is applied. The formula is easy to apply and comes in two tubes. J-B weld is a must have in anyone's tool box and has been proven to be the de-facto in cold soldering in many R/C hobbies including Radio Controlled Helicopters.

Same great applicator as the mixing formula is now available in a stick version. J-B Weld is an amazing formula which once binds will produce an ever lasting strong bind which will hold tight and not come loose. Often used on mount pinions to a motor's main shaft. The pinion will not slip or fall once J-B is applied. Proven to be the de-facto in cold soldering in many R/C hobbies including Radio Controlled Helicopters.

Multi purpose sand paper is useful for many application. The assorted sandpaper comes with 9 sheets of 4 1/2 x 5 1/2 inches. Perfect to apply against wood plastic metal painted layers and many other surfaces. Sandpaper is always good to carry around in your tool box.

Double sided thick sheet used to both hold in place as well as a shock absorber for receivers Gyros battery packs and more. The sheet is about 5mm thick and the adhesive is very strong.