This is all of the best CNC upgrades for your Trex 600 ESP in one convenient kit. Although true this kit adds some very nice bling to your helicopter there are more benefits then just aesthetics in installing these upgrades. The cross member sections such as the bottom plate, gyro mount and receiver mount add rigidity to your airframe which does in fact add to the stability of the platform. The Bearing blocks are thrust bearings increasing efficiency in your drive train. This is indeed one seriously nice upgrade kit for your Trex 600ESP helicopter.

Note: the Performance Tail Upgrade provides superior tail control for sport and hard 3D flying styles. With flanged, radial ball bearing supported tail grips and a dual radial ball bearing, fully-supported thrust bearing tail rotor assembly, the new upgrade kit provides a slop-free, high-performance tail that is rock-solid for all maneuvers. The design is a simple retrofit for the common Align parts on the helicopter, with the ability to be used on all TREX 600E/ESP, 600 Nitro, and 700 Nitro helicopters on the market. When installing the flanged radial ball bearings, Bearing Retainer is REQUIRED between the tail control link and the outer bearing housing to prevent loosening or separation during flight. PLEASE REVIEW THE INSTALLATION DIAGRAM ABOVE BEFORE INSTALLING.

G-Force Pro-Cage for the T-Rex 600N /600E. FEATURES: Second 3mm tandem rod parallel to 3mm primary flybar rod. One piece frame for crisp cyclic input to the paddles. Works with either 400mm or 440mm flybar rod. Ball links can be removed easily. Optional (Part# GFT6181) Titanium tandem rod set for a stiffer setup. Anodized for durability and good looks.

After Market Quality Carbon Fiber composite boom for the T-Rex 600. This boom is a direct replacement. Strong and rigid with a beautiful finish.

This optional 6mm shaft for the 4025 series Scorpion motors is to enable you to use the Align 6mm pinions with the 4025 series of motors. This motor was originally designed with a 5mm shaft but the new Align Trex 600ESP line of helicopters has adopted a 6mm shaft and therefore 6mm pinions. The idea is to use the Align pinions directly with the Scorpion 4025 series motors.

Direct drop in replacement part for 4025 series motors.

High quality Skid Nuts by Lightning Power designed to fit .50 - .90 size helicopters using standard skids such as Trex 600, Trex 700, Raptor .50, Raptor .90 and etc. This is one complete set.

An essential tool to remove one-way bearings out of the hub or housing. This stainless steel bearing removal tool is designed to work on the stock T-REX 600. 100% CNC stainless steel.