Aluminum Flybar Paddle Control Frame Arm Set: B400
Aluminum Head Block Rotor Housing Set Blue: B400
Aluminum Main Rotor Blade GripSetw Arms: B400
Blade 400 325mm Carbon Fiber Main Rotor Blade Set: B400
Blade 400 Pinion Gear 11T 0.5M: B400
Velcro Loop Strips
Blade 400 Pinion Gear 9T 0.5M: B400
E-flight 30-Amp Pro Switch-mode BEC Brushless ESC
E-flite's 30-Amp Pro SB brushless ESC offers up to 30 amps of continuous current with proper airflow and a peak of 35A. It drives up to 5 analog or 4 digital sub-micro servos with the BEC on any recommended input voltage. This brushless ESC includes programmable motor braking, soft start for helis and planes, timing, throttle input range and low-voltage cutoff. It also features auto motor shutdown in case of lost signal or interference. The safe power-arm mode prevents accidental starts.
- Features:
- Up to 30A continuous current with proper airflow, with 35A peak
- 5V switch-mode BEC circuit capable of 700mAh continuous current on any recommended input voltage
- Drives up to 5 analog or 4 digital sub-micro servos with the BEC
- 3S-4S Li-Po or 9- to 12-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cut-off with settings for 3S Li-Po (9.2V), 4S Li-Po (12V) or 74% of battery starting voltage
- Programmable soft start for helis and airplanes
- Auto motor shutdown if signal is lost or there is interference
- Programmable timing - 5 user selectable ranges for use with a larger variety of brushless motors
- Heli mode for starting the motor with a low speed ratio
- Optional RS232 Serial Link available for programming (EFLARS232)
- Pre-wired connectors-E-flite EC3 connectors on battery input and 3.5mm female gold bullets on motor output leads
HeliHobby.com is your source for Remote Control RC Helicopters, products, modifications and more. Full Range of Nitro, Electric and Micro Helis in stock
Manual.pdf
