E-flite's 30-Amp Pro SB brushless ESC offers up to 30 amps of continuous current with proper airflow and a peak of 35A. It drives up to 5 analog or 4 digital sub-micro servos with the BEC on any recommended input voltage. This brushless ESC includes programmable motor braking, soft start for helis and planes, timing, throttle input range and low-voltage cutoff. It also features auto motor shutdown in case of lost signal or interference. The safe power-arm mode prevents accidental starts.
- Features:
- Up to 30A continuous current with proper airflow, with 35A peak
- 5V switch-mode BEC circuit capable of 700mAh continuous current on any recommended input voltage
- Drives up to 5 analog or 4 digital sub-micro servos with the BEC
- 3S-4S Li-Po or 9- to 12-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cut-off with settings for 3S Li-Po (9.2V), 4S Li-Po (12V) or 74% of battery starting voltage
- Programmable soft start for helis and airplanes
- Auto motor shutdown if signal is lost or there is interference
- Programmable timing - 5 user selectable ranges for use with a larger variety of brushless motors
- Heli mode for starting the motor with a low speed ratio
- Optional RS232 Serial Link available for programming (EFLARS232)
- Pre-wired connectors-E-flite EC3 connectors on battery input and 3.5mm female gold bullets on motor output leads
E-flite High-Power Lithium Polymer batteries offer an excellent blend of weight, power and performance. Available in a wide variety of capacities and voltages, there's a battery perfect for almost any application from indoor slow flyer to large-scale sport and aerobatic airplane models, as well as micro to mid-sized helicopter models.
- Capable of maximum continuous discharge rates up to 20C, placing this battery among the most powerful LiPo battery packs in its class
- Equipped with balancing leads and connectors that are compatible with most balancers and balancing chargers*
- Equipped with E-flite® EC3 connector on main power leads
- Plug-and-play use with E-flite ESCs and chargers right out of the package
- Specs:
- Type: Lithium Polymer
- Capacity: 1800mAh
- Voltage: 11.1V
- Connector Type: Main Power Leads: E-flite EC3 / Balancing: Standard 4-Pin
- Wire Gauge: 13
- Number of Cells: 3
- Weight: 5.5 oz (156g)
- Configuration: 3S
- Length: 4.05 in (103mm)
- Width: 1.35 in (34.3mm)
- Height: 0.85 in (21.6mm)
- Maximum Continuous Discharge : 20C
- Maximum Continuous Current : 36A
Bearing 3x6x2.5mm (2)
Blade 400 Pinion Gear 9T 0.5M: B400
Blade 400 Pinion Gear 10T 0.5M: B400
Blade 400 Pinion Gear 11T 0.5M: B400
Blade 400 325mm Wood Main Rotor Blade Set White: B400
Blade 400 325mm Carbon Fiber Main Rotor Blade Set: B400
Blade 400 Main Rotor Blade Mounting Screw and Nut Set: B400
Blade 400 Main Rotor Blade Grip Holder Set: B400
Aluminum Main Rotor Blade GripSetw Arms: B400
Blade 400 Bell Mixer Arm and Pushrod Link Set: B400
Blade 400 Bell Mixer Pushrod Link 2 : B400
Blade 400 Thrust Bearing 3x8x3.5mm 2 : B400
Blade 400 Spindle Feathering Shaft 2 : B400
Blade 400 Head Block Rotor Housing Set: B400
Aluminum Head Block Rotor Housing Set Blue: B400
Blade 400 Flybar Seesaw Holder Set: B400
Blade 400 Flybar Paddle Control Frame Set: B400
Aluminum Flybar Paddle Control Frame Arm Set: B400
Blade 400 Flybar 220mm 2 : B400
Blade 400 Flybar Paddle Mounts Adapters: B400
Blade 400 Flybar Paddle Set for Mounts Adapters: B400
Blade 400 Washout Base: B400
Aluminum Washout Base: B400
Blade 400 Washout Control Arm and Linkage Set: B400
Manual.pdf
