Esteem Heli produces some the highest quality aftermarket parts in the heli industry. All CNC machined aircraft aluminum (7075, highest grade). Designed and produced in the USA. With the Esteem Heli blade grips, there is no more breaking and wearing.

Esteem Heli produces some the highest quality aftermarket parts in the heli industry. All CNC machined aircraft aluminum (7075, highest grade). Designed and produced in the USA. With the Esteem Head Block, you will have no flex and no wear. It will allow you to stiffen the dampening up as much as you want.

Esteem Heli produces some the highest quality aftermarket parts in the heli industry. All CNC machined aircraft aluminum (7075, highest grade). Designed and produced in the USA. These flybar end caps will stiffen the cage as well as eliminate a weak spot.

Esteem Heli produces some the highest quality aftermarket parts in the heli industry. All CNC machined aircraft aluminum (7075, highest grade). Designed and produced in the USA. CNC Outer Swashplate features improved control and response and is practically indestructible.

Protect your machine when setting it up or when learning to fly with these properly sized training gear. The kit will allow you to survive not so perfect landings. The size of these training gear was specifically produced around the dimensions of a typical mini size Heli. It allows for minimum weight gain while still protecting your rotor blades from chipping do to a ground strikes and tip overs. The training gears also feature 30 degrease of carbon rod angle which allow for additional spring like protection from hard landings. Made with indestructible soft balls ( not ping pong balls which easily crumble ). This is a high quality product. Includes all you see in picture ( base has room to support up to six carbon rods ).

The Precision Main Blade Grips and Mixing Arms are designed to work on the new Blade CP PRO helicopters. The product is 100% aluminum CNC machined to provide best precision and durability. With total of 10 miniature ball bearings this combination works flawlessly on the blade CP PRO head and brings much better smoothness in the head response. The mixing arms are redesigned to equip with high precision bearings in each arm instead of brass washers to provide super smoothness and eliminate all unwanted flops. Moreover the light and stylish high quality aircraft aluminum blade grips can help reduce the flex in the Blade CP head and improve cyclic response on the E-FLITE Blade 400 helicopters. Silver anodized.

The Precision Tail Pulley Case is designed very strong solid and slylish for the Blade 400 helicopters to allow entire Tail Rudder System to operate up to 20 000 RPM without vibration. This new design is guanrantee to keep the tail shaft running true at all times. It is designed to improve tail controls performance on the E-flite Blade 400 helicopters.

The Dual ArmTail Pitch Lever is designed with double arms to provide additional support on both sides of the tail pitch slider. It is designed with an additional mounting hole to give users option to change pivot point for the bell carnk to achieve best performance. With double precision bearings built in the unit gives best precision tail controls and smoothness. Moreover the Tail Pitch Lever uses a CNC Metal Ball to achive best precision as well as durability. It is designed to improve tail controls performance on E-FLITE BLADE 400 helicopters.

Replace stock plastic horizontal fin holders with these strong and stylish CNC aluminum ones. This horizontal fin holder set is designed to work on E-flite Blade 400 to reduce the chance of breaking plastic horizontal fin holders as the plastic version is more prone to breaking in slight crash. The new strong aluminum fin holder holds the horizontal fin by new high quality hex screws. Silver anodized.

The new CNC tail rotor from MicroHeli is designed to replace stock plastic tail rotor of the popular E-Flite Blade 400 helicopters. It is made of strong aluminum and machined at very high accuracy to provide highest tolerance fittness. All screws bearings and hardwares are selected with highest quality. Nylon lock nuts are used to better secure the tail rotor blade grips at high tail rotor rpm. Silver anodized.

The Spider Gear system for the E-Flite Blade 400. We applied our legendary patent pending landing gear system to the Blade 400 because of large amounts of requests. Blade 400 pilots were complaining about breaking their gear during hard landings and crashes. The Spider Gear system acts as sort of an air bag for your heli, helping to absorb shock before damaging forces reach your main frame. Stock Gear also absorb the forces to their breaking point. After they break, you still have a very good chance of damaging your main frame. Also a broken landing gear will always result in a roll over, breaking or damaging the following. blades, head parts, tail parts, shafts, etc. Crashes can also damage your expensive electronics. Our Spider Gear system will help absorb your hard landings and when coupled with the included stiffener plate will distribute forces throughout the entire lower frame of the helicopter instead of the forces hitting the 4 mounting points of the gear. One survived crash with the Spider Gear that would have otherwise caused severe damage to your heli is worth far more than the initial cost of the Spider Gear.