hummingbird upgrades

Current View

Products > Hummingbird > Upgrade parts

<< < 1 2 > >>

Page 1 of 2


	Hummingbird V1 V2 and Mini Dragon Fly Retrofit Landing Gear


	For the Hummingbird

In our opinion this hand down the BEST modification for the Hummingbird it is simply a must have. No more messing with broken skids broken struts and even mounting the battery pack is made simple. No Super Glue assembly ( all mounting hardware is included ) and these retrofit landing gear are simply close to indestructible. The kit is supplied with built in mounting systems for both lithium and NiMH Packs using the lower front built in clamp. The struts can bent all the way to the ground without breaking. Note that this is a CNC machined Delrin part and NOT molded plastic ( higher strength and quality ). We love this upgrade and highly recommend it !!!

	24.99

PART#HH2272

- Includes close to indestructible landing struts
- Pre mounted system for battery mouthing ( lithium and NiMH )
- Kit installs in seconds on original frame
- Complete screw installation ( No more messing with super glue )
- Kit installed in less than five minutes
- Designed to be the lightest with slots drilled to struts


	Hummingbird Elite FP and CP Retrofit Landing Gear


	For the Elite FP / CP

In our opinion this hand down the BEST modification for the Hummingbird Elite it is simply a must have. No more messing with broken skids broken struts and even mounting the battery pack is made simple. No Super Glue assembly ( all mounting hardware is included ) and these retrofit landing gear are simply close to indestructible. The kit is supplied with built in mounting systems for both lithium and NiMH Packs. The struts can bent all the way to the ground without breaking. Note that this is a CNC machined Delrin part and NOT molded plastic ( higher strength and quality ). The machined anodized purple plates are designed to be a direct fit onto your existing FP and CP Elite Hummingbirds and no modification is required to the original frame. We love this upgrade and highly recommend it !!!

	29.99

PART#HH2271

- Includes close to indestructible landing struts
- Pre mounted system for battery mouthing ( lithium and NiMH )
- Aluminum Plates are anodized purple same as original frame
- Kit required no modification to original Hummingbird
- Complete screw installation ( No more messing with super glue )
- Kit installed in less than five minutes
- Designed to be the lightest with slots drilled to struts


	Sport Wood Fully Sym CP Blades and CF Fin Set


	Blades for the Viper / Piccolo CP / Hummingbird CP

The pair of fully Symmetrical / pre weighted / pre balanced collective pitch blades ( Airfoil is the same on top and bottom of the blade ) are perfect for 3D and sport flying and will allow for fast pushing inverted flight. Two versions of the blade are available standard and long. Standard: comparable to stock wood blades however these blades come professionally pre covered and the weighted tips are pre inserted also these blades are much more affordable compared to stock blades. Get these and save !!!



select checkbox below:

Sport Wood Fully Sym CP Blades and CF Fin Set 24.99 Wood sport fully sym standard CP blades 19.99 Wood Sport Fully Sym Long CP Blades 15.95 Carbon Fiber Vertical and Horizontal Fins 8.99

- Long: 25mm longer than stock and designed to be used with a duct fan instead of a tail rotor ( since they are longer and may hit tail rotor setup ). Engineered to produce a much greater lift for about the same motor RPM. These performed very well under continues testing and will ultimately prolong flight time and will help maintain constant motor RPM. These blades ship with blue adhesive covering film.

This discount package comes with the following products:

- WB257A Wood Sport Fully Sym Long CP Blades
- HH1429 Carbon Fiber Vertical and Horizontal Fins

Black Tail rotor housing and vertical fin

For all dual motor Helis

The direct drive / large prop system allows you to install a direct drive with a special motor shaft coupler. The coupler is held in place using set screws against the motorâs shaft and so it allows for a more robust / larger tail propellor to be installed. In fact this setup is powerful enough to give your dual motor Heli serious tail control and also allows the propellor to be securely installed ( thanks to the coupler ) directly onto the tail motor. The tail fin is made of flexible plastic and so it protects the tail prop from ground strikes. The tail fin also comes with a bearing housing so you may still install a drive gear if you wish to stay away from a direct drive tail system. Several components are available in this package including tail fin mount only prop with coupler and mounting hardware and a set of replacement props ( optional ). Be sure to order both the first and second item for a complete tail conversion. Will install on any standard 7/8mm boom ( Piccolo Hummingbird Skylark etc ... )

select checkbox below:

Black Tail rotor housing and vertical fin 4.99
Tail Rotor blade with mounting hardware (Adapter is included) 7.50