DC Input Power
The Bantam e-Station BC6DC is operated with DC power only. For AC operation a power supply of 11V to 18V with 100 watts of power or 8 amps is required. As a result it can charge up to 15 cells of NiCd/NiMH and 6S of Lithium batteries with maximum current of 5.0A.
Individual voltage balancer for Lithium batteries buit in
The BC6DC has an individual cell voltage balancer built in. So it does not need an external balancer when charging Lithium batteries (LiIo/LiPo/LiFe) for cell balancing.
Balance individual cells on discharge
The BC6DC also can monitor and balance individual cells on Lithium batteries during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with an error message.
Accept various types of Lithium chemistries
The BC6DC can accept three types of Lithium batteries - LiIo, LiPo and LiFe (A123). They have different characteristics by their chemistry.
Lithium battery 'Fast' and 'Storage' mode
'Fast' charge reduces the charging time of Lithium batteries and 'Storage mode controls the final voltage of the battery for long time storage.
Data store/load
Up to 5 data memories. Each memory can be recalled at any time you need without reprogramming.
Cyclic charging/discharging
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.
PC based analysis using USB communication
For the advanced user, the BC6DC offers an optional PC based program (Part # BAN-EAC300) that can analyze the characteristics of the battery through the USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.

- Operating software
The operating program in this charger is executed with mutual links and communications with every components to prevent any possible error, so it introduces the maximum safety. Especially, the charging algorithm is so multifarious that you can select the best program to suit your requirement. And BC8DX has a large LCD for showing various informations including charge/discharge graphs during the process.

- High-power dual output circuit
BC8DX employs the circuit that features two totally independent but identical high-power outputs which are powered as much as 160watts each. As a result, it can charge or discharge up to 44 cells of NiCd/NiMH or 16 series of Lithium batteries simultaneously. Furthermore, the twin-fan cooling system is so efficient that can hold such a power without any trouble of running the circuit.

- Dual Individual voltage balancer for Lithium batteries
BC8DX has individual cell voltage balancers at both outputs. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for voltage balancing.

- Balance individual cells on discharge
BC8DX also can monitor and balance individual cells of the Lithium battery pack during the discharge process as well as ‘FAST’ and ‘STORAGE’ mode. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.

- Accept various types of Lithium battery
BC8DX can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer 'Warnings and safety notes' section.

- Maximum safety
Delta-peak sensitivity : The automatic charge termination program works on the principle of the Delta-peak voltage detection. (NiCd/NiMH)
Auto-charge current limit : When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of charge current to avoid from feeding high current to the battery. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode.
Capacity limit : The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.
Temperature limit : The temperature of the battery on charging or discharging will be raised by its internal chemical reaction. If you set the limit of temperature the process will be expired forcibly when the limit has been reached.
Processing time limit : You can also restrain the maximum processing time to prevent any possible defect.

- Cyclic charging/discharging
Perform 1 to 10 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing at both outputs.

- PC based analysis using USB communication
For technical expert, BC8DX offers PC based program can analysis the characteristic of the battery via USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack. This program can run on both outputs with single USB link to PC.

Get detailed info on all your battery packs with this add-on program for the Bantam E-Station BC6, BC6-10 and BC8 chargers.

This is a Lipo battery connection board for Common Sense RC-style balance connectors. (same as Align, e-Flite and DualSky) Works for 2-8 cell packs. For use with the Bantam E-Station BC8DX chargers and balancers.

The Ultra-Balancer is the simplest method of keeping your Lipo packs balanced. It can be used for packs up to 22.2 volts (6S). Works as a stand-alone balancer before charging or simultaneously with your charger doing it's balancing function at the same time that your pack is being charged. 2.5mm spacing on pin connection allows over 90% of the packs in the market to be used without any adapter required.

This Thunder Power RC DLC-250A data cable connects any Thunder Power balancer to a Thunder Power 1010C charger. It is included with every 1010C. It works with both the 205V or 210V balancer.

Great for a huge variety of battery types (NiCd, NiMH, LiPo and Li-Ion, and lead-acid), and applications such as electric airplane and heli batteries, Tx and Rx batteries, car and boat batteries, field batteries, and more. Triton2 adds upgraded features to the design of the revolutionary original Triton charger, famous for its high performance, versatility, and rugged durability. Charge current is increased to 7A. The custom LCD now includes a blue backlight for easy viewing. T2 can handle LiPo packs with up to 5 cells in series. The input cord has installed banana plugs, and large attachable alligator clips are included. The modified programming dial is easier to control. And a slight programming change, plus a totally recreated instruction manual for ease of use and understanding.

Just because a charger is small and affordable doesn't mean it can't still handle many of your charging needs -- the Triton EQ is proof! Based on the Triton Jr., the Triton EQ offers the capability to handle the latest battery technologies, including LiPo, Li-Ion and even LiFe (A123) cells -- and there's no need for an external LiPo balancer, because it's built in. The Triton EQ can also charge 1-14 NiCd and NiMH cells -- great for radio batteries -- with charge currents up to 5 amps to handle large power packs. And that's in addition to the convenience of a built-in AC power supply and an adjustable-angle LCD!

∙Fast charge current is adjustable from 100mA to 5 amps
∙Peak detection technology for NiCd and NiMH batteries
∙Constant current / constant voltage technology for lithiums and lead-acid batteries
∙NiCd and NiMH trickle current
∙Discharge current adjustable from 100mA to 1 amp
∙Discharge cutoff voltage adjustable for NiCd/MH batteries
∙NiCd and NiMH batteries can be cycled from 1 to 5 times for conditioning1 year warranty
∙Touchpad controls and super-simple programming make for simplicity and reliability
∙Displays input and output volts, peak volts, individual lithium cell voltages, avg dsch volts, chg and dsch capacity, currents and time, error messages, and more
∙Audible beeper aids in programming and notifies of function changes
∙Safety features include fast charge safety timer, current overload and reverse polarity protection

Everything that makes the Triton2 great is on the Triton2 EQ -- and then some! In addition to 10 battery memories and the ability to monitor heat-sensitive batteries with the optional Thermal Probe (GPMM3151), the Triton2 EQ features a built-in LiPo balancer, the convenience of a built-in AC power supply, compatibility with the latest battery technologies such as LiFe (A123) cells, an adjustable-angle LCD and an increased charge current of up to 8 amps!

Features
• For LiPo, Li-Ion, LiFe (A123) NiCd, NiMH, and Pb batteries
• Includes built-in balancer for up to 6S packs
• Fast charge up to 8 amps
• Built-in balancing for 1-6S LiPo, Li-Ion, or LiFe (A123) cells (ElectriFly and FlightPower adapters included)
• 0.1-8.0A adjustable charge current
• Precision peak detection with adjustable sensitivity for NiCd and NiMH batts
• Constant current / constant voltage charge method for Pb and lithiums
• Temperature sensing capabilities (GPMM3151 Thermal Probe available separately)
• Top-off charge feature fully charges NiMHs without overheating
• 0.1-3.0A adjustable discharge current
• Adjustable discharge cutoff voltages for NiCd/MH, pre-set voltages for Pb and lithiums
• Perform 1 to 10 cycles (NiCd/MH only), and recall all data
• Configure up to 10 batteries in memory for instant, easy recall and charger set-up
• Banana plugs on DC input, and includes mating alligator clips
• Displays input and output volts, peak volts, average discharge volts, charge and discharge capacity, currents and time, data for 10 cycles, errors, and individual lithium cell voltages
• Audible sound cues aid in programming and notification of function changes.
• Warning messages for improper input voltage, poor connections, unsuitable battery condition, reverse polarity on output
• Safety features include cool-off time delay, maximum NiMH charge input, fast charge safety timer, current overload and reverse polarity protection

A General purpose wall power supply and charger with alligator clips which can be used to power any 12V 600mAH device such as the Deluxe Power panels Torque Masters starters starter batteries and more. The power supply uses a standard US 120V power source.

The Mercedes of chargers. Orbit and Orbit MICROLADER V6 / Pro combines all functions an R/C hobbyist could wish for in one compact device: automatic fast charging reflex charging easy (cc) charging and discharging. The forming or reconditioning of new or rarely used battery cells is also possible with this device. The Orbit and MICROLADER V6 and Pro are powerful chargers for Nickel Metal Hydride (NiMh) Nickel Cadmium (NiCd) lead (Pb) and Lithium Polymer batteries which simultaneously serves as a precise measurement device for the battery capacity. A clearly arranged LCD display informs you at any time about the battery voltage the charging current the total charging time and the charged electricity (in mAh). Can be connected to a PC interface ( depending on version purchased ) to transfer and analyze the measured data with the Orbit MICROLOG software. User-friendly and due to its sophisticated and compact design very robust and handy. This is one of the best chargers in the world. Comes highly recommended for all of your charging needs.

NEW! Hyperion EOS 0610i DUO2 1S-6S 16N CHARGER, with Integrated LBA10A balancers - DUAL 180W Outputs with max 12S SYNC MODE. This is the updated version to the original Hyperion Duo. This charger is the perfect solotuion to series charging as well as being a well rounded all in one charging solution for most r/c related battery options on the market today.

The Align RC 1 to 4 Cell Lithium Polymer Battery Charger / Balancer runs of a 110/240 Volt Input Includes reverse polarity protection and short circuit protection. Works for 3.6V / 3.7V 2-4 cells Li-ion/Li-polymer batteries. For both balance charge and charging in series. It is a fast convenient design. Balance is critical to prevent overcharging or undercharging and this device does just that balances your packs. Also includes an auto-detected charge status display. Cooling fan and multi-circuit protection to avoid over heating

This is the RCC-6SX charger / discharger and RCE-6BA Balancer combo from Align. Charger / Discharger FEATURES: Charges Ni-Cd, Ni-MH, Li-Ion, and Li-Poly batteries. Special aluminum alloy anodic treatment outer case for good heat dissipation and quality. Built-in heat sink for heat dissipation. Automatic Ni-Cd / Ni-MH battery discharge/ charge cycle for battery activation. Use the RCE-6BA Li-Po Balancer to protect batteries during charging, extend battery life, improves performance and power. RCE-6BA Li-Po Balancer FEATURES: Separate balancing and charging ports eliminates the charging amperage limit due to the balancing wires gauge. Dual mode balancer: Can be used as stand alone balancer or concurrently with a separate charger. Automatically balance 2~6 cells li-poly packs. Balancing voltage resolution accurate to ±0.005V. Individual cell balancing status displayed through LEDs. Overcharging prevention circuitry with cutoff set at 4.26V/cell for additional safety, minimizing potential damages to the cells. Low voltage cutoff set at 3.3V/cell to prevent over discharging of cells.

This is currently the only AC battery charger for the MCX! Another quality Lightning Power product.

This AC wall charger for the MCX by Lightning Power allows you to charge two batteries at one time! This is essentially two independent chargers which work with each battery individually. You can add or remove a battery to either charge jack without worrying about interrupting the charge for the other charge jack. Each charge jack has its own status light to indicate charge in progress or charge complete. This is a must have for any Blade MCX owner!

Lightning Power's LiPo Safe is a fireproof bag designed to safely charge and store lithium polymer batteries. This provides superior fireproof protection. Charge safely using Lightning Power's LiPo Safe. It's a definite must for all Lipo battery users.

Balancing adapter PCB for the Schulze next chargers. Pitch 2.00 mm. Up to 14 balancers/cells.

The Thunder Power 2-10 cell Smart Balancer will Auto balance (active if more than 0.005V imbalance) Lithium packs thus you may achieve higher currents and optimum charging conditions on all cells. This conditioner forces all cells which are part of a pack to hold the same current which translates into a high capacity pack. A balanced pack charges more quickly and most importantly will give you a longer flight time.

This is the TP-610C Charger with Built-in Balancer from Thunder Power. 10 amp Charging / Balancing system. Charges LiPo, A123, NiCd/MH and PB. 1 to 6-Cell LiPo and A123 cells, 14 NiCd/MH cells and 6-12V Pb. It can charge, balance, discharge, cycle batteries and report back full data. It is capable of up to 10 amps (80 watts total) for charging.

This is a top of the line charger that goes up to 10 cells and can charger up to 5 cells at 10 amps. It can also charge a 10 cell pack at 5 amps. It has many sophisticated features and and is able to work directly with the new TP 201V Balancer. This combination will give you the ability to get the best charge and balance on your TP Li-Poly Battery Packs. Thunder Power High Power Charger supports 1-10 Li-Poly cells, 10Ah up to 5 cells Commmunication port for TP balancer. Size 160mm x 108mm x 47mm 220Watts.

This is the Great Planes Lithium Battery Charger with A/C 120V wall adapter. Its inexpensive, works great and you can always find a 120V AC source so you don't have to use your car's 12V source. Great for Micro and Sub Micro Helis.

No longer do you have to remember to flip a switch because the Auto Add-a-Trickle automatically switches to trickle after the overnight charge is complete. Auto Add-a-Trickle simply and quickly installs between the wall transformer and the charge connectors on any dual output radio system charger. No soldering required! Plug everything in and push the Charge button. Sixteen hours later the Auto Add-a-Trickle switches to a low safe trickle rate (1/5 th normal rate) thus allowing you to leave the batteries on the charger until you're ready to use them always confident they are 100% charged. You never again have to miss a perfect day because you didn't charge the night before. LED's monitor continuity and charge status. An additional push button will force the device into the trickle rate condition. This quality product is housed in an attractive molded plastic case.

This is the Astro Flight Blinky LiPo Battery Balancer for one to six cell LiPo batteries. FEATURES: This battery balancer is designed for use with LiPo batteries. Accepts one to six cell Li-Po batteries. Now you can see if all cells are above 3.2V before charging. You can discharge individual cells that are over-charged. Connector has .100mm in pin spacing and .025mm sqaure pins and fits Apogee and other brands.