Blade CP CCPM is its first of a kind machine as it is the first collective controlled Micro Heli which is geared towards the beginner pilot. It comes ready to fly out of the box and includes high quality molded plastic parts to allow for a more accurate flight control ( less flex and slop ). The Esky uses a 3 armed swashplate with direct links to the rotor head ( CCPM technology ) . This system is driven by an onboard mixer / esc which controls the logic of each direction of flight ( thus a simple 4 channel transmitter can be used ). This genius design removes the complexity of controller and board setup and its all masked inside the already pre configured on board black box. Right from the box, the Blade CP offers collective pitch and CCPM control that will let Heli pilots fly in almost any direction. Transitioning from forward flight to hover with smooth, solid control is a cinch and negative pitch is a breeze for aerobatics like loops and rolls. The Blade CP is versatile enough to fly anywhere, and almost everything needed to fly is included and installed such as a Ni-MH battery pack, 370 main motor, 4-in-1 receiver, mixer, ESCs, gyro and a 6-channel FM radio system with servo reversing and CCPM mixing. All that is needed are 8 AA batteries for the transmitter. Plus, each Blade CP is test-flown at the factory to ensure precise performance and control which makes it truly ready to fly right from the box. For more elaborate aerobatics and inverted flight, Blade CP pilots can use a 3-cell 860-1320mAh Li-Po battery pack and E-flite's Aerobatic Enhancement Kit (EFLH1168), which includes wooden symmetrical main blades, main motor heat sink, tail motor heat sink and 370 main motor with 9-tooth pinion. If you are looking to jump into a high end inexpensive collective pitch micro radio controlled helicopter, the Honey bee / E-Sky CCPM is for you !!!

The Blade CP+ is the perfect next step for anyone who's mastered the basics of heli flight with a coaxial heli like the Blade CX (EFLH1200) or Blade CX2 (EFLH1250), and is ready for a model capable of more advanced maneuvers. It's also an excellent choice for experienced pilots looking for the best in ready-to-fly micro helicopter performance and value. The Blade CP+ includes all the impressive features of the original Blade CP, like CCPM and collective pitch, plus a number of new features and accessories that further enhance its flight performance for low-time and experienced pilots alike. The included, optional-use training gear set adds stability while also providing support and cushioning to prevent tip-overs and rotor blade strikes for newer pilots. The 3S 11.1V 800mAh Li-Po battery pack offers a significant boost in power and duration over the Ni-MH batteries found in other similar class models, and the included, optional-use symmetrical main rotor blades allow you to perform advanced aerobatics like loops, rolls and inverted flight without the need for a single hop-up. The separate receiver and advanced 3-in-1 control unit are plug-and-play compatible with brushless power systems and heading lock gyros so you can further enhance the capabilities of your Blade CP+ when you're ready to take performance to the next level. The Blade CP+ is versatile enough to fly anywhere, and everything needed to fly is included and installed such as the 3S 11.1V 800mAh Li-Po battery pack and balancing charger, 370 main and N30 tail motor, 3-in-1 mixer, ESCs and gyro, three S75 sub-micro servos and a 6-channel FM radio system with servo reversing and CCPM mixing. Plus, each Blade CP+ is test-flown at the factory to ensure precise performance and control which makes it truly ready to fly right from the box. Nothing can touch the cutting-edge performance and value of the Blade CP+.

Blade CX is one of the most reliable and stable dual coaxial Helicopter in the market. The Blade CX is very light thus allowing for more stable flight with sharper maneuverability. Perfect for beginners or anyone entering the amazing hobby of radio controlled helicopter. If you are looking for a high quality, inexpensive dual rotor scale looking machine, the Blade CX is for you.

The Blade CX2 coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional heli so diffcult. Instead of a tail rotor, the Blade CX2 uses differential rotor speed for tail control so the inherent stability of the counter-rotating blades is preserved in all phases of flight, making this a heli just about any first-time pilot can enjoy. No assembly is needed and there is nothing left to buy. In addition to the 2.4GHz DSM 5-channel transmitter and 4 AA batteries, the Blade CX2 also includes a rechargeable 2-cell 7.4V 800mAh Li-Po battery pack with Charge Protection Circuitry, DC Li-Po Balancing Charger, AC charger adapter and a step-by-step instructional VCD that helps ensure your first flight is a successful one. E-flite also offers a number of aluminum option parts for the Blade CX2 including: an upper rotor head (EFLH1240), upper bearing holder (EFLH1244), lower rotor head (EFLH1245) and swashplate (EFLH1246), that not only look great, but fly great and are durable too.