The strong blade grips will not flex like the stock grips and will allow for a secure strong fit.

Machined from aluminum. Bearing and hardware included. Stiffer than the original motor mount yet light and strong. Serves as a frame stiffener in addition it also acts as a heat sink for motor.

Machined from aluminum. Brass balls included. Will work with both 90 and 120 collective setups. Steel center ball. Ultra light. CCPM mixing is a must have on the ECO so you can move away from mechanical mixing and further reduce total weight

One-way bearing hub / main gear not only allows auto rotations but also prevents the gears from stripping when using powerful brushless motors and lithium batteries.

Upgraded tail slider with a brass sleeve and ball bearings. Anodized red to match. Major reduction of tail slop over stock slider.

The aluminum mixing arms will help achieve better control and raiser sharp cyclic. Perfect for aerobatic style flying.

Matching aluminum rotor head upgrade this alloy Seasaw is a direct replacement and anodized red to match the rest of the aluminum set. Fits both ECO 8 and ECO 16.

Complete rotor head with main hub and sixteen ball bearings. All metal rotor head for Eco not only looks good but improves control and feel of the heli. All parts are anodized red to match color scheme.

Mounting the servos at an angle using the Ikarus 120 degrees swashplate is made easy with these servo extension plates. With this mod the swash links will connect to the swashplate from the servos with no angle and will eliminate any uneven cyclic rotation allowing for identical cyclic response in all directions.

Clamp fits the ECO boom. This can be used as a boom support clamp or it can be combined with our universal servo mount to make a tail boom servo mount. A perfect match for the HS-81 DS368 micro servos or equivalent. Much more rigid and secure than the Ikarus mount. Machined from aluminum lighter and stiffer than carbon mounts. The mounting holes are taped and mounting screws are included.