 |
|
|
|
|
E-Flight 2C LiPo Balance Charger 0.5A
|
|
|
|
|
|
All Micro Helis
|
|
|
|
This compact 11.5 V to 15V DC 2 cell Lithium charger / balancer outputs 0.5A and ideal for small battery packs. Designed by E-Flight for the Blade CP and other Micro Helis which use 2 cell Li Packs. Also available separately is a 120V converter so you may connect balancer / charger directly into a wall outlet. The Charger / Balancer comes with a hook up to the 120V AC/DC convertor so it is very easy to install. |
|
|
|
|
|
Electrifly Triton Jr DC Computer Charger and Dis-charger
|
|
|
|
|
|
Designed after the Triton charger
|
|
|
|
Charger with much of the versatility of the Triton but for less. The Triton Jr. has many of the same basic features of the original, including the ability to charge, discharge, and cycle, and can be used with NiCd, NiMH, LiPo, Li-Ion, and Pb batteries. Its smaller in size and lighter in weight, so its easier to transport, and perfect for smaller-sized electric flight applications. The Triton Jr. as an opportunity for R/C pilots on a budget to enjoy the quality, performance and precision that modelers across the world have trusted for years. |
|
|
|
- Ideal for small and large electric Helis
- Charge at up to 5 amps, discharge up to 1 amp
- Cycle up to 5 times
- Handles up to 14 NiCd or NiMH cells, or 4S LiPo packs
- Features a rugged 4-direction membrane touchpad
- Very simple programming menu
- Blue backlight on the 2 x 16 LCD screen
- Unit is enclosed in a durable aluminum case
- Input Voltage: 10-15V DC
- Battery Types, # of cells: 1-14 NiCd/NiMH
- 1-4 LiPo/Li-Ion (3.6 or 3.7V cells)
- Fast Charge Current: 0.1-5.0A NiCd/NiMH (0.1A step, 63W max.)
- 1C rating LiPo/Li-Ion (63W max.)
- Peak delay at start: 3 minutes fixed
- Discharge Current: 0.1-1.0A (0.01 step, 5W max.)
- Cycle count: 1 to 5
- Battery Memory: one
- Display Type: 2 x 16 LCD, blue backlight
- Case Size: 4.7 x 3.6 x 1.2 in (118 x 92 x 30 mm)
- Weight: 13.1 oz (371 g)
|
|
|
|
|
|
|
|
|
|
|
|
Hyperion EOS06010I Duo - Dual Port All in One Charger and Balancer
|
|
|
|
|
|
Integrated LBA10A balancer
|
|
|
|
Hyperion EOS 0610i 6S 16N CHARGER, with Integrated LBA10A balancer features 2 Built-in LBA10 Balancers, Adjustable Power Sharing (%) Between Outputs, TCS – Terminal Capacity Selection, PC Port for Data Logging and Firmware Upgrades, Temp Sensor Ports, Power Supply Amperage Control to allow reliable with lower-output power supplies, Power Supply Voltage Control (PS Load Control) works in concert with Amperage control to insure the charger does not overload your power supply, Output Cords Included, Dual Cooling Fans, 20 User Definable Memory Positions. All EOS610 Duo chargers have been updated with the newest firmware upgrade 1.1. |
|
|
|
- Specifications:
- 1 to 6 Cells Lithium Polymer
- 1 to 6 Cells Lithium Ion
- 1 to 6 Cells A123
- 1 to 16 Cells Nicd/Nimh
- 1 to 12 Lead Acid
- 0.1 ~ 10.0A Charge Current
- 360-Watts Max Output
- Wide Voltage Input Range 11v~28v
|
|
|
 Manual.pdf
Layout and Control Flowcharts.pdf
|
|
|
|
|
|
|
|
|
Align 1 to 4 Cell Lithium Polymer Charger / Balancer (V1)
|
|
|
|
|
|
All Helis
|
|
|
|
The Align RC 1 to 4 Cell Lithium Polymer Battery Charger / Balancer runs of a 110/240 Volt Input Includes reverse polarity protection and short circuit protection. Works for 3.6V / 3.7V 2-4 cells Li-ion/Li-polymer batteries. For both balance charge and charging in series. It is a fast convenient design. Balance is critical to prevent overcharging or undercharging and this device does just that balances your packs. Also includes an auto-detected charge status display. Cooling fan and multi-circuit protection to avoid over heating |
|
|
|
- Dimension: Length 135 x width 80x height 35 (mm)
- Series no: RCC-4CX
- Input Voltage: AC 100-240V 50-60Hz
- Output Voltage: 2cell DC 7.4V
- 3cell DC 11.1V
- 4cell DC 14.8V
- Output Current: 1000 mA/cell
- Include 11.1V(balance/series)20A switch connector
|
|
|
|
|
|
|
|
|
|
|
|
Intelligent Multifunction Charger Combo RCC-6SX+RCE-6BA
|
|
|
|
|
|
By Align RC
|
| | | |
