For all CP Micro Helis who tale 200mm - 240mm blades
These E-Sky Carbon Fiber blades are 225mm long and will fit most Micro collective pitch helicopter which take 200mm - 240mm rotot blades. The blades come with brass inserts at the root for a better hold against mounting screw. Fully symmetrical, these blades perform well under regular or inverted flight.
- Carbon Fiber
- 225mm long
- With brass inserts
E-Sky Gyro with remote Gain
Micro Gyro for small Helis
This inexpensive electronic gyro comes with remote gain so you can change the sensitivity of your Gyro remotely ( remember that you need an extra free channel on both the receiver and transmitter ). The Gyro is also supplied with a reverse / normal feature. So if you are after an affordable gyro for your Helicopter, the E-Sky gyro is just it.
- Description Input power:5VDC - Weight:11g Size:28x28x19mm - Reverse switch - Gyro gain - Auto calibrate
Paddle
Esky Fixed Pitch Rotor Head Set
Tail motor set N30 Motor w/8T 0.5M Pinion (S)
Main motor 370 w/ 9T 0.5M Pinion
Bearing
Flybar
Tail rotor blade
Ring Like Push Rod
Bearing 2x6x3
Tail rotor housing
Tail rotor drive gear
Vertical fin set
Tail motor heat-sink
Paddle control frame (outer)
Allen Key and Fastener
ESKY Training Gear Set
For beginners
Essential for the beginner heli pilot, turning any copter into a trainer. The set includes four plastic balls and light carbon rods. The gear attaches to helicopter skids and creates a larger base to promote safe landings, making the heli less likely to tip over. Fits the ESKY Honey Bee and other 300 size helis.
- Easy to install but assembly is required
- Makes cyclic slower and easier
- Uses 4 ultra light balls and CF rods