This is the Futaba R617FS 2.4GHz FASST 7-Channel Park Flyer to Giant Scale Aircraft Receiver. FEATURES: High sensitivity receiver weighs only .25oz (7g) without case yet is a full range system for all aircraft from giant scale to park flyer applications-no need to buy separate receiver for specific aircraft. Simple one-touch binding - no plugs to mess with or lose. Dual Antenna Diversity allows 2.4GHz FASST Futaba transmitter to select the best reception between the two receiver antennas with no signal loss Rubber grommets installed where antennas exit to eliminate stress and fraying of the two antenna wires. One year limited warranty.
- Specifications:
- Size: 1.6 x 1.1 x .35 inches (40 x 27 x 9mm)
- Power Requirement: 4.8 to 6V
- Current Drain: 80mA (at no signal), 74 mA(w/ signal no servos on 4.8)
- Weight: 0.34oz (9.8g) with case, 0.25oz (7g) without case
Futaba R6008HS 8-Channel 2.4GHz FASST Receiver
2048 Resolution on CCPM channels!
This is the Futaba R6008HS 2.4GHz FASST 8-Channel Receiver. This receiver is switchable between regular and HS modes, per the Link/Mode button.
FEATURES: G3 2048 resolution plus FASST benefits including Dual Antenna Diversity and significantly reduced latency for lightning quick response High speed operation allows digital servos to update more rapidly than analog servos (both are compatible with this receiver) HS (High Speed) mode improves frame rate on channels 1-6 to only 7 milliseconds-compared to 14 milliseconds at normal mode One year limited warranty.
COMMENTS:
In HS mode, digital servos (including those in the BLS series) must be used on channels 1-6. Those channels will also operate gyros and brushless ESCs. Channels 7 and 8 continue at normal mode and accept any servos.
INCLUDES:
- Futaba R6008HS 2.4GHz FASST 8-Channel Receiver with instruction sheet
SPECS:
- Dimensions: 1.8 x 0.9 x 0.5 (45 x 22 x 13mm)
- Weight: 0.48oz (13.5g)
- Power Requirement: 4.8 or 6.0V battery or regulated output from ESC
Futaba R6014FS 14-Channel 2.4GHZ FASST Receiver
By Futaba RC
This is the Futaba R6014FS 2.4GHz FASST 14-Channel Receiver. FEATURES: Futaba advanced technology allows this receiver to be the first 2.4GHz receiver able to utilize all 14 channels. It retains G3 2048 resolution and Futaba Real Time Response from the 72MHz version. Simple one-touch binding - no plugs to mess with or lose. A full range system for all aircraft from giant scale to Park Flyer applications-no need to buy separate receiver for specific aircraft. Dual Antenna Diversity allows 2.4GHz FASST Futaba transmitter to select the best reception between the two receiver antennas with no signal loss. Rubber grommets installed where antennas exit to eliminate stress and fraying of the two antenna wires.
- Power Requirement: 4.8 to 6V
R6014HS 2.4GHZ FASST RX 14CH
High Speed on channels 1 through 6
HeliHobby notes:
This is the 14 Channel High Speed Fasst receiver. You can use this with any servo or you may utilize the HS feature with compatible digital servos.
Futaba Notes:
Simple one-touch binding - no plugs to mess with. Perfect for full range system for all aircraft from giant scale to Park Flyer applications. No need to buy separate receiver for specific aircraft. Two operation modes. Normal, frame rate of 14ms accepts any type of servos and High Speed with a frame rate of 7ms for digital servos including the Futaba BLS servos. High Speed on channels 1 through 6. Dual Antenna Diversity allows 2.4GHz FASST Futaba transmitter selects the best reception between the two receiver antennas with no signal loss. Rubber grommets installed where antennas exit eliminates stress and fraying of the two antenna wires.
SPECS:
- Power Requirement: 4.8 - 6V
- Dimensions: 1.48 x 2.05 x 0.63 (37.6 x 52 x 15.9mm)
- Weight: 0.76oz (21.5g)
INCLUDES:
- Futaba R6014HS 2.4GHz FASST 14-Channel Receiver
- Instruction Sheet
Futaba 2.4GHZ FASST R6014FS 14CH Rx and TM-14 14Ch Module
Ny Futaba RC
This is the Futaba 2.4GHz TM-14 Module and R6014FS 14-Channel Receiver for the 14Z, 12Z and 12FG Radio Systems. The software of the 50MHz and 72MHz 12FG, 12Z and 14MZ systems must be updated prior to installing this module. A Memory Card is required, see REQUIRES below for Memory Card type. FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) transmits a large amount of information to the receiver at extremely fast speed. Simple plug-in module installation-no transmitter modifications needed. Ultra fast channel shifting eliminates interference and eliminates the hassle of waiting for frequencies to open up. Dual Antenna Diversity- Futaba 2.4GHz FASST system seamlessly selects the best reception between two receiver antennas, so there's no loss of signal. One year limited warranty.
- REQUIRES:
- Memory Card: The Compact Flash Memory Card (FUTM9410) is included with the 14MZ and can also be used with the 12Z. Also, a CF memory card can be purchased from an electronics store. The 12FG system requires an SD memory card which is not carried and must be purchased separately.
- Specifications:
- 2.4GHz TM-14 Module.
- Communication Method: One-way operation system
- Transmission Antenna: Mono-pole
- R6014FS Receiver.
- Reception Antenna: Dual
- Size: 1.6 x 1.1 x .35 inch (40 x 27 x 9mm)
- Weight .25oz (7g)
Futaba R608FS 8-Channel 2.4GHZ FASST Receiver
This is the Futaba R608FS 2.4GHz FASST 8-Channel Park Flyer to Giant Scale Aircraft Receiver. A full range system for all aircraft from giant scale to Park Flyer applications - no need to buy separate receiver for specific aircraft. Simple one-touch binding - no plugs to mess with or lose Dual Antenna Diversity allows 2.4GHz FASST Futaba transmitter to select the best reception between the two receiver antennas with signal loss. Rubber grommets installed where antennas exit to eliminate stress and fraying of the two antenna wires.
- Features:
- 2048 resolution
- Dual antenna diversity (one internal and one external antenna)
- Specifications:
- Size: 1.8 x .9 x .5 inch (45 x 22 x 12.7mm)
- Weight: 0.48 oz (13.54 g)
- Weight w/o case: 0.33 oz (9.32 g)
- Power Requirement: 4.8 to 6V
This is the Futaba R616FFM 2.4GHz FASST 6-Channel Receiver. Compatible with the following FASST transmitters. 6EX, 7C, and the following transmitter modules. TM7, TM8 (on 7 channel mode), TM10 (on 7 channel mode) and TM14 (on 7 channel mode). FEATURES: Designed for use with park flyers or indoor aircraft. Compatible with micro connectors only. Easy one touch linking to transmitter. One year limited warranty.
- Specifications:
- Dimensions: 1.5 x 0.9 x 0.3 inches (38 x 22 x 7mm)
- Weight: 0.22oz (6.3g) with case
- 0.14oz (4.0g) without case
- Power Requirement: 4.8V- 6.0V battery or regulated output from ESC
- F/S and Battery F/S function (for channel three)
- Battery F/S Voltage: 3.8V
- Current Drain: 75mA (w/no servos) with or without signal.
- Approximate range of 1000 ft.
HeliHobby.com is your source for Remote Control RC Helicopters, products, modifications and more. Full Range of Nitro, Electric and Micro Helis in stock