This is the Gorilla Grip compact 7pc foldup metric drive set (Metric). Perfect for any size Helicopter, from T-Rex to the full size Raptor. Features maximum strength Protanium Steel construction: High Torque Steel that's 25% stronger than the competition. Corrosion resistant black Proguard finish creates crystalline structure that doesn't allow water to penetrate. Precision tip eliminates cut off burr problems. The rotation feature: 90 degree stop feature converts the tool into a non-stop, time-saving spin wrench. Space age composite handle that's stronger than steel. Lightweight ergonomic design handle is not temperature sensitive when working in extreme hot and cold conditions with bare hands. Turn and Flip feature: means not having to disengage the tool from the fastener when working on helicopter hex screws such as blade grips and chassis assembly. Tool isolating flutes and adjustable key tension.

This is the Bondhus Six Piece Balldriver Set (Metric) w/ ProHold Tips. FEATURES: Black hardend steel shafts with Red durable plastic handles.

Reversible Tips, Extendable length, Non-Slip grip

This tool will help you make your own push rods for linkage systems. 2mm Cutting Die w/handle. Now you can easily make your own rods with a threaded end. Fix old push rods or make custom length rods with this cool little tool. The hard handle insured a proper grip and the Complete kit is a must have for any true hobbyist.

Electric pilots who fly micro or mini helis need convenient, inexpensive and reliable tools to keep their machines in top shape. E-flite offers this 6-piece Heli Tool Kit to fit their needs. FEATURES: Includes 2.5mm ball driver, 2mm hex driver, 1.5mm hex driver, 2mm flat screwdriver, plus #0 and #00 Phillips screwdrivers. Ergonomic rubber-coated easy-to-grip handles.

Top quality pliers are forged from fine-grain tool steel, machined to close tolerances with hand-honed cutting edges properly hardened. They are polished, adjusted and inspected. Perfect for the Hobby these multi purpose cutting pliers come very handy.

Tool was specifically designed to remove the Align fan hub from your .50 or .90 size motor. This tool works for both 600N and 700N Align helicopters.

Basic iron features precise thermostatic-control up to 450°, plus contoured shoe and safety stand.

No benchtop is complete without these super-strong stainless-steel bent-tip scissors that snip, cut and trim practically anything. Especially useful to cut canopies and fuselages as the curved scissors help you get to places which you normally have to use a knife to get to.

Use these spring action curved tip pliers for easy installation and removal of all plastic ball links. Ball links are the core connection style for all rods and links in remote control Helis. Properly installed and removed of ball links insure a smooth running setup which ultimately results in a smoother running helicopter.

Ball Link Wrench. Stop ruining ball links by sticking objects in them to thread them in. Instead use your fingers and apply just the right amount of pressure. Kit comes with two ball link wrenches so you can counter turn both sides of the threaded rod end. This is a universal one size fits all designed tool.

Quickly and easily connect and remove plastic ball ends for adjustments without damaging the parts. These pliers are made from high grade carbon Steel and include a self adjusting spring for additional help when making adjustments. Designed to work with all ball links.

This new tool kit from Lightning Power is designed specifically for the r/c heli enthusiast. The box is made with aluminum and ABS material. The foam is precisely cut to house 9 different styles of drivers, 3 different style pliers and a pitch gauge. The slim design stores easily and makes a great field kit to make those last minute adjustments but is also a fully equipped solution to perform even extensive work.

You Helicopter deserves only the best parts, and these parts can benefit from the best tools. This combo pack from MicroHeli (MH) hex kit comes with the most popular size wrench set using carbon Steel 3mm Hex Nut.

The MicroHeli ball link sizer 3.5mm is designed to help easily resize the undersized plastic ball linkages. The tool is made of steel and and anodized for long lasting and rust prevention. A very useful and handy tool for your micro helicopter tool box.

These ball link pliers are great quality and are made to fit most helicopters from 400 size to 90 class

This great tool from TweezLight is their popular lighted tweezers packaged with two other styles of useful tweezers giving you a selection of Grabber Jaw, Needle Tip or Chiseled Tip. These tweezers are equipped with a bright LED and are constructed of high quality stainless steel making them extremely tough. Along with the handy carrying case this tool is an invaluable tool for model building.

Handy, interchangeable screwdriver set. Perfect for any size Heli this screw driver set includes a total of 14 different interchangeable drivers including hex, Phillips flat heads and more. Specifically distributed by TTR for RC Helicopters this kit includes the most common size screw drivers you will need to work on your Helicopter. The complete kit comes in a compact case which makes it ideal for your tool kit.

You probably think to yourself why are we so excited about screw drivers well all Helis use metric bolts and nuts and it is often hard to find the right tools for the job especialy when it comes to those tiny tiny allen wrenches which we all keep loosing. With this tool set you will have to search no more the hex kit comes with drivers from the smallest set screw head of 0.7mm to the larger 3.0mm. Also the socket set is awsome for holding metric nuts from slipping while tigtening bolts or socket head screws. And of course no kit is complete without a set of flat head and phillips screw drivers.

Gear puller from E-flight. Fits all shafts from 1mm to 5mm. High quality chrome finish. Makes removing shaft pinions a breeze. The puller is chrome plated and it is perfect for both Micro Helis such as the Blade CP and 400 size Helicopters such as the T-Rex or X-400. Comes with three puller adapters to accommodate multiple size pinions.

The Hardened-Tip Hex Driver 0.9mm is a very handy tool to have around, especially when working with Micro Helis. The 0.9mm is so small that most Allen keys will destroy the socket head screw. However this high quality 0.9mm hex driver features a secure grip handle and a high quality hex tip so you can tighten those very small socket head screws without destroying them.

The perfect tool kit for any pilot. It comes complete with both Phillips and socket head drivers. Replacable drivers and a hard CNC anodized handle. Available in a few options. Perfect for Helicopters such as the T-Rex 450, 500,600 and many others. HZ040 driver set comes with 2 handles and two 1.5mm hex heads a 2.5mm hex head and a 3mm phillips head. HZ041 includes 1 handle and a 1.5mm head as well as a 3mm phillips head. HZ046 includes 1 handle and a 3.0mm hex head and a 3mm phillips. HZ024 includes 4 full hex drivers with handles 1.5mm 2.0mm 2.5mm 3.0mm . HZ025 Includes 2 full drivers with handles 1.5mm and 2.5mm. Select the option that is right for you.

Includes straight point, straight spring style, angled spring style, and duck bill tweezers. You no longer have to fight to get a screw into position, or holding a wire in place while soldering or removing a spacer, these are just a few of the countless uses you will find for you 4 Piece Stainless Steel Tweezers Set.