High performance heading hold gyro for heart pounding 3D maneuvers. Fully optimized for aggressive 3D and Precision flying. Features an amazingly constant pirouette rate and solid straight line hold. Allows for the use of any tail servo and is a breeze to setup. The Solid G allows for the use of any tail servo currently available on the market, from the Futaba 9256 to the JR 8700g. All you have to do is pick which servo you will be using from the menu and plug it in. Also the unit allows you to select the type of helicopter you are flying. Vibe, Stratus, Trex 600 and Synergy all have preprogrammed base maps to make it that much easier to tune the unit to your machine. The Solid G was designed to be used with the G-View (sold separately). So everyone that gets a Solid G should also get a G-view in our opinion. We do not pack them together as a set because once you purchase 1 G-View you do not need to buy any more. Even if you have 5 ATG's and 5 Solid G's you only need 1 G-View.

Introducing the smallest, lightest heading hold heli gyro in the world. How does a heli gyro smaller than a postage stamp perform? If it's the GY520, the answer is brilliantly. In tiny electrics and .90-size 3D aerobatics. With analog servos as easily as digital servos. And on about one-tenth the current other gyros require.

There's no amp, no control box - just a tiny, ten gram square that's 6 grams lighter than any heading hold gyro around. It blends the superior tail-holding power of AVCS design with new sensors so sensitive that response is effectively instantaneous. And for fine-tuning, there are seven programmable features and three ways to set them.

• Ultra small and light weight gyro contained in one unit-no separate sensor and control unit.
• Utilizes a high speed advanced PID (Proportional-Integral-Derivative) control algorithm.
• Latest MEMS (Micro-Electro-Mechanical Systems) allows complete control system on one chip.
• Compatible with digital and analog servos.
• F3C and 3D mode selectable.
• Operates at very high speed. 280Hz in the 1250uS mode and 506Hz in the 760uS mode.
• Programmable through single button and multi-color LED or through a PC using Futaba CIU-2 USB adapter.
• Registered AVCS (Angular Velocity Control System) architecture achieves unmatched tail holding ability.

The simple hook-up to sophisticated programming. Ideal for use with the GY520 gyro and MC401CR, MC601 or MC850 electronic speed controls. Includes USB connector and a 19.7 extension. Requires PC with Windows® Vista, XP, or 2000 operating system and USB port.

The Futaba GY401 is the undisputed most commonly used gyro for the 400/450, 500 class helis. It is fully 3D capable giving you that “locked in” feeling with no drifting. It is extremely setup friendly and typically requires no fine tuning after minor incidents as you may be used to experiencing with other high end gyros. Please note that an existing package is available for GY401 + s9254 for 600 and 700 class helis.

HeliHobby is taking care of our customers most common requests by making a combo for the other popular combinations with the GY401. We are packaging it with the 9650 in Package A or the 9257 in Package B. Both commonly used on the Trex 450 and Trex 500 helis along with other types of helis in their respective classes.

As a note you may choose the GY401 + 9254 for your Trex 500 using a Trex 600 tail servo mount. This is a great option for those of us wishing to push the limits with our 500 class helis. We will include a free 600 servo mount in Package C.

Hitec is proud to announce the HG-5000 micro heading lock gyro with the “extreme speed” HSG-5083MG Digital Micro Tail Rotor servo. The HSG-5083 was built specifically for the HG-5000 to obtain optimum performance in the T-Rex 400-450, Helimax 400-450 or similar class of electric helis. At 0.35 oz the HG-5000 is very light and small, yet yields performance equal or better than any other Gyro available.

The HS-5065MG High Performance Micro Servo features Hitecs digital, programmable circuit for incredible resolution, centering and holding torque. It also features metal gears, a top-ball bearing, and 31 ounces/inches of torque with a quick transit time of 0.11 sec at 6 volts, it is no doubt THE choice for high performance micro helicopters. HS-5000 GYRO Features
• Optimized High Response Narrow Band Hitec Signal
• Best with Hitec HS-5083MG
• Universal Signal Selectable (both Digital and Analog)
• Precision Control Technology for Heading Lock
• Auto Detection for any Transmitter and Receiver
• No initializing Time - Powering up in Head Lock Mode
• Extreme Tolerance against Disturbance and Vibration
• Advanced Real Time Sensor for Drift Removal
• Remote Gain Adjustment
• Light Weight and Compact Size
• Self Diagnosis Function
• Simple and Vivid LED Display
• Easy Data Setting
• Low Power Consumption (20mA)

HSG-5083MG Features
• Micro Digital Servo for HG-5000 use only
• Optimized for 400-450 class EP Helicopters
• All Metal Gear (1st MP Gear)

Hitec is proud to announce the HG-5000 micro heading lock gyro with the “extreme speed” HSG-5083MG Digital Micro Tail Rotor servo. The HSG-5083 was built specifically for the HG-5000 to obtain optimum performance in the T-Rex 400-450, Helimax 400-450 or similar class of electric helis. At 0.35 oz the HG-5000 is very light and small, yet yields performance equal or better than any other Gyro available.

Protect your Futaba GY401 gyro electronics from any damage with this nearly indestructible aluminum case. Made of the highest grade aluminum (harder than 7075). Fits the GY401 perfectly with holes and openings for the lights and controls. Only slightly larger than the stock plastic case and almost 3mm thick in certain areas. Weighs just 14g.

The CSM SL560 Gyro introduces ground breaking technology. From the inventors of the Heading Lock technology comes the SL 560, Smart Lock technology is the new version of Heading Lock which gives the tail an even better more sensitive lock and stop capabilities. The Gyro also comes with a parallel port interface so you can connect it to your personal computer for further configuration. The SL 560 is an awesome Gyro with great features.

With the development of the SL720, CSM takes gyro performance to the next level and beyond! Using a Micro Machined Silicone Ring Sensor from one of America’s premier semiconductor manufactures, the SL720 provides the ultimate combination of bandwidth, dynamic range, and stability, offering performance not seen in any gyro before. The SL720 requires the use of a Digital/Super Servo, and when combined with the use of the PC interface and software (Interface and software sold separately), can be used with the top of the line Futaba 9251 tail servo. The SL720 comes complete with the necessary leads, special vibration isolating mounting system , PC Interface and software, and complete instructions. Provides drift free operation and outstanding temperature stability Gyro Flight Modes- Heading Lock and Rate Modes Quick Set-up- Makes it simple to set gyro sense, servo type and servo travel from your TX New Quick Trim - Accurately corrects linkage set-up Built in Exponential- Gives smooth and progressive stick response Yaw Rate Demand - Gives you total control of stick sensitivity Digital Servo Use Only- Designed for use only with high end Digital/Super servos, JR 8700G, Futaba 9251, etc.

At just 11.0 grams, the full-featured G110 Micro Heading Lock Gyro gives micro and mini helicopter pilots all the benefits of locked-in tail control plus the ability to optimize its performance for use with digital or analog servos.

This Heading Lock can operate at Standard or HH Rate modes. User-selectable modes that optimize performance for digital or standard servos. On-gyro single gain setting adjustment capability. Optional dual remote gain setting and mode adjustment capability. Built-in drift cancellation and temperature compensation circuitry.

WK-G006 from Walkera utilizes the AVCS (Angular Vector Control System) and is designed specifically for RC Helicopters. The integration of the sensor section and control circuit makes for an easy installation. FEATURES: Control system: Digital advanced PI (proportional integration). Gyro sensor: piezoelectric sensor. Operating voltage: DC 5V. Operating temperature range: -5 ~ +45 deg C. Dimension: 30 x 30 x 23mm. Weight: 18g. Functions: reverse switch, sensitivity trimmer, servo travel adjustment.