 |
|
|
|
|
BladeFX Holo-Blade Decals
|
|
|
|
|
|
Dynamic patterns with your rotor blades
|
|
|
|
Cool accents for your heli rotor blades. The BladeFx currently comes in 2 sizes. The small is designed for the mini helicopters such as the Trex-450, X-400 and Raptor mini Titan and are 9 inches long and approximately 0.75 inches wide. The large size will fit any full size heli and are 18 by 2 inches (approx.). They are cut from high grade material. We have tested these on a Trex 600 and we have 30 flights and still going strong. We also have 15 flights on a nitro machine. Available in several designs with more to come. Click on the picture below to view. |
|
|
|
|
|
|
- Installation Instructions:
- Accent kits come ready to install. They are layered with a clear transfer tape to make installation a breeze. All you need to do is cut the around the accent and peal off the backing paper. The line the accent up with the blade and apply.
- Care Instructions:
- If used on an electric machine there is really nothing you need to do. But if you install them on a nitro machine all you need to do is wipe the blades down with a 50/50 Denatured Alcohol and water mix, or what ever solution you used to clean your helicopter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hurricane 550mm Carbon Fiber Main Blades
|
|
|
|
|
|
For .30 size Helis
|
|
|
|
These HURRICANE high performance, carbon fiber reinforced, main rotor blades are titanium metallic silver in color and are fully symmetrical (clockwise rotation). Blades are supplied statically and dynamically balanced and are Ready To Fly. |
|
|
|
|
|
|
- SPECIFICATIONS:
- Length: 550mm
- Weight: 115g
- Width: 50mm
- Grip: 8-12
- Hole: 3-4mm
- Air-Foil: Symmetrical
- Washout: N/A
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbon Fiber Main Blades Swift 520mm
|
|
|
|
|
|
For the Swift Helicopter
|
|
|
|
Full symmetrical carbon fiber upgrade main blades for the Swift electric helicopter. Important: Check whether your Swift uses 3mm or 4mm bolts on the main blade grip. This product will only fit those with 3mm bolts. |
|
|
|
|
|
|
- From Century Helis
- For the Swift Electric Helicopter
- Length: 520mm
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RotorTechâ„¢ 430mm Angled Tip Carbon Fiber Main Blades
|
|
|
|
|
|
Perfect for Trex 500!
|
|
|
|
Safety wire runs along the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders. Low parasitic drag coeficient due to the efficient airfoil and top quality clear resin finish ensure more engine power is transferred for lift, speed and more crisp maneuvers.
* High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g spanwise loading.
* Designed for your 3D performance.
* Matched C.C.G. for stability.
* Matched outward S.C.G. for better autos.
* Airfoil designed for fast, accurate cyclic.
* Layered for optimum aerodynamic damping.
|
|
|
| |
