 |
|
|
|
|
Sub Micro 6 channel receiver
|
|
|
|
|
|
For Hand Held and Palm size Sub Micros
|
|
|
|
This receiver is very light, it only weighs 3.8g/0.13 oz even include all connector sockets which wotk with the Sub Micro servos and ESCs. Antenna has a length of 450mm. This receiver compatible with all PPM transmitters with Futaba Shift. Requires a Micro crystal such as the GWS Sub Micro crystals. Perfect for Sub Micro Helis such as the Precision Micron, Dexterity, HeliStar and others. |
|
|
|
- Range of Input Voltage: 10-15V DC;
- Consumed Current: <50Ma;
- Output Current: 150mA, 250mA, 350mA, 450mA, and 550mA for choice
- Cut off method: intelligently automatic voltage check
- Chargeable Batteries: 2 cells (7.4V) and 3 cells (11.1V) Li-Poly battery;
- Size: 70x45x17mm;( 2.75x1.77x0.67in)
- Weight: 49g.(1.72oz)
|
|
|
|
|
|
|
|
|
|
|
|
Berg 7P Programmable Receiver
|
|
|
|
|
|
Dont let the tiny size and light weight fool you, this is a full range RX
|
|
|
|
The Berg 7P provides the solid precise control and superior noise rejection every modeler demands. The same proven microprocessor driven True Digital Signal Processing (TDSP) and Transmitter Signal Recognition (TSR) functions that have made the Castle Creations Berg 4 the industry standard in full range micro receiver performance ensure flight after flight of glitch-free operation. Connect the Berg 7p to your Castle Link for unprecedented control of its numerous programmable functions! Easy channel mapping and adjustable servo response rate are the initial basic features. Real time slider control on screen to set your fail safe servo positions and view your transmitter signal outputs as you move your radio control sticks. The Berg 7p has seven output channel ports, but you can replace any of them with channels 8 and 9 using the Castle Link. IMPORTANT: Please note that you need to order the none standard berg crystals. We do not have these on the site and we can do a special order for you if you give us a call. |
|
|
|
- Programmable Fail Safe
- Triple tuned RF circuitry
- True Digital Signal Processing (TDSP)
- Advanced triple-tuned RF filtering hardware
- Transmitter Signal Recognition (TSR)
- The receiver learns the characteristics and specific signal signatures TX.
- RX will only listen to your transmitter
- No. of channels 7
- Outputs 1-2-3-4-5-6-7
- Channels Any 7 of
- channels 1-9
- Filtering Triple tuned RF circuitry
- Filtering Steep flank 8 pole IF ceramic filter set
- Filtering True DSP filtering in the microprocessor decoder with adaptive algorithms
- Sensitivity Better than 1.2uV
- Size .85 x 1.25 x .5 inch
- Weight: .28 oz (8g)
- Crystal Berg Micro ONLY
- Case Translucent Polycarbonate
- Special Order crystals
|
|
|
|
|
|
|
|
|
|
|
|
Futaba R168DP 8-Channel PCM Receiver 72MHz w/o Crystal
|
|
|
This is the Futaba R168DP 8-Channel 72MHz (channel 11-60) PCM 1024 Dual Conversion Receiver without Crystal. FEATURES: Narrow-band spacing and Dual Conversion signal filtering combine to provide exceptionally clear, interference-free reception and amazingly smooth, accurate control. |
|
|
|
- Requires: 72MHz Dual Conversion Receiver Crystal Low Band (11-35) or 72MHz Dual Conversion Receiver Crystal High Band (36-60)
- Specifications:
- Narrow Band: 20kHz Power Requirements: 4.8 to 6.0V (shared with servos)
- Dimensions: 1.1 x 2.2 x 0.79 inches (29.2 x 55.8 x 20.0mm)
- Weight: 0.85oz (24.2g)
- Note: 1024 Resolution is NOT Compatible with Older PCM 512 Systems.
|
|
|
|
|
|
|
|
|
|
|
|
Futaba R168DF FM Receiver 72mhz
|
|
|
|
|
|
By Futaba
|
|
|
|
This is the 72MHz Futaba R168DF 8-Channel FM Receiver without Crystal. FEATURES: Strong interference free reception for all 4+ channel Futaba FM systems. Narrow band spacing and dual conversion signal filtering. Accepts high or low band crystals. One year limited warranty
|
|
|
|
- SPECS:
- Dimensions: 1.1 x 2.2 x 0.8 inch (28.5 x 55.5 x 19.8mm)
- Weight: 1.0oz (28g)
|
|
|
|
|
|
|
|
|
|
|
|
Futaba R617FS 7-Channel 2.4GHz FASST Receiver
|
|
|
This is the Futaba R617FS 2.4GHz FASST 7-Channel Park Flyer to Giant Scale Aircraft Receiver. FEATURES: High sensitivity receiver weighs only .25oz (7g) without case yet is a full range system for all aircraft from giant scale to park flyer applications-no need to buy separate receiver for specific aircraft. Simple one-touch binding - no plugs to mess with or lose. Dual Antenna Diversity allows 2.4GHz FASST Futaba transmitter to select the best reception between the two receiver antennas with no signal loss Rubber grommets installed where antennas exit to eliminate stress and fraying of the two antenna wires. One year limited warranty.
|
|
| | |
