This is the mod to get for better stability as well as blade tracking and durability in your LMH Heli.

For a smoother tail system and to eliminate flexing of the drive shaft install the Corona Belt System. The kit comes complete with everything you need including a strong belt that is only 3mm wide.

The Hyper Drive was designed to give the Corona flyer a smooth and quiet machine and maximum efficiency while eliminating any chance of gear breakage or broken teeth which is often the case with the stock setup. Unmatched quality and the belt was designed to withstand lots of abuse. Installation is straight forward with all necessary components and pulley included.

Crazy Tail V2 with elevated tail rotor kit. If you ever wanted the ultimate tail for your Corona this is it! An enormouse amount of testing and development have gone into this very unique kit. The advantages of the elevated tail are numerous. First the tail rotor is 3 to 4 inches off the ground. This gives the tail rotor much more clearance for landing tail down or in high grass. Second when mounted high the tail rotor operates in Clean (undesturbed) air. This gives an added degree of control not found in standard straight tail designs.

Replace the stock plastic gear case of the Corona LMH with this sweet practically indestructible CNC aluminum gear case. The case it designed to be used ONLY with the belt conversion and comes pre assembled complete with all bearings and hardware. This is a HOT mod which you will be sure to appreciate and love and as an added benefit this upgrade also comes with a unique style all CNC Carbon Fiber Tail vertical fin.

Complete 7mm main shaft conversion kit. The 7mm titanium main shaft has four separate diameters for a specific reason The base of the shaft is 4mm to accept the stock main gear or Hyper Drive . The main portion of the shaft that takes all of the bending load is 7mm. The upper tip of the shaft is 5mm for the rotor hub and finally the portion of the shaft just below the rotor hub is 6MM to accept either the stock swash plate or the Eco-8 aluminum swash plate. This is a very versatile upgrade. Another noteworthy feature of this 7mm shaft kit is It's compatibility with the stock airframe as well as any after market airframe.

This rotor head has been specifically designed to eliminate the flex found in the stock head as well as increase the stability of the Corona. Made of 6061 T6 aircraft aluminum rotor hub for accuracy and strength. The follower arm is CNC machined out of Delrin. Delrin is a space-age plastic that has wonderful density and abrasion properties making it perfect for the follower arm. This dampening is needed to retain stability when increasing rigidity of the head and main shaft. This rotor head was designed for the titanium main shaft upgrade only. It is bored to 5mm. It will not work with the stock 4mm main shaft.

The Corona Blade is the lightest crutch to date. It is 3mm thick carbon fiber replacement keel for the stock Corona aluminum crutch keel. The crutch is nearly 40% stiffer and Almost 50% lighter than the stock aluminum keel. The aluminum keel weighs 79 grams. The Blade carbon fiber keel weighs in at a feather light 40 grams. This is not an entire airframe it is the center keel only as well as a new aluminum canopy mount. A more compact layout with all three servos parallel. Also the landing gear is mounted 1/4 inch further forward and 1/4 inch lower on the keel for a taller stance. The motor plate mount slots are elongated as well. This elevates Hyper Drive clearance problems found with the aluminum crutch. It is a drop in replacement for the aluminum crutch using all of the stock hardware and for the the older wooden crutch you will just need to purchase the landing skids and motor mount from our OEM parts section.

The Orbit Drive was designed to give the Corona flyer a smooth and quiet machine and maximum efficiency while eliminating any chance of gear breakage or broken teeth which is often the case with the stock setup. Designed for the popular outrunner motors such as the Orbit, AXI, Actro, etc. For regular inrunner motors pls. use HH2288 Hyper Drive instead. Unmatched quality and the belt was designed to withstand lots of abuse. Installation is straight forward with all necessary components and pulley included.

The Collective Pitch Rotor head consists of all CNC machined aluminum parts. All pivots are ball bearing supported. It comes with a carbon fiber two piece flybar and our own wafer dampening system (pioneered by BT)! This new head is extremely radical. It is capable of working with the Corona main blades, or standard symmetrical carbon fiber blades. This is due to our unique wafer dampening/blade mounting system. Comes as a complete head and flybar assembly. The kit requires our billet aluminum swashplate, 7mm titanium main shaft kit, and the belt drive tail kit to work properly. If you already have those other items, the head kit alone can be ordered. This head has been completely debugged and refined. It is an aerobatic design capable of inverted flight (with symmetrical blades). The head is good for up to 2000 rpm, or up to 2500 rpm with the optional thrust bearings. You can order the thrust bearings with your head, or separately. CD with instructions included.

Corona Stealth Crutch upgrade frame for the Corona 120. The most advanced airframe available for the Corona. This airframe is the culmination of hundreds of hours of research and design. A seemingly endless number of material types and grades, as well as thicknesses were researched in an attempt to make this airframe extremely rigid while remaining light. This air frame is a very exotic item. While cost is always a concern, the complete airframe was designed to be the ultimate in both performance and looks. The Stealth Crutch comes complete with airframe, landing gear, all related screws, hardware and instructions. Comes pre assembled.

The Crooked Crutch (named for the asymetrical keel) is the culmination of years of experience with the the Corona Helicopter. The airframe comes complete with carbon fiber landing skids and underslung battery carriage! The Crutch is the flagship modified frame. This airframe is compatible with all of Ballistic Tech upgrades, just as the Stealth Crutch is. Experience the performance your Corona is capable of! Or, go ahead and go for the Stealth Crutch. Either way, you will be very satisfied with your upgraded CF frame.

This all CNC machined carbon and Delrin tail servo mount for the Lite Machines Corona is designed to accept standard size servo such as the popular Futaba 9253 and 9254. Installation is straight forward as this is a direct replacement onto the boom. Come complete with all mounting hardware.

Increase stability on your Corona LMH. Your Heli will be lighter and more attractive with this all carbon vertical fin upgrade from Ballistic Technology. The fin comes complete with the boom mounting clamp as well as all of the mounting hardware. Ultra light and smooth finish.

LMH Horizontal and Vertical fin set. Improves your stability in fast forward flight. Comes complete with plastic mounting brackets for both vertical and horizontal fin set.

LMH Vertical fin. Made of light Carbon Fiber. Protect the tail while keeping weight to a minimum.

The after market flat carbon Flybar was designed to address a few issues including elimination of the nose pitch up effect and add a very aggressive cyclic response virtually eliminating the nose-up tendency and allowing for faster and more dynamic cyclic control. The tunable flybar also allows for changes in cyclic response ( more or less stable ) using the supplied weights making this upgrade a great choice for beginner and advanced flyers alike.

The V2 Dampened Crazy Plate feathering plate for the corona replaces the stock head with this superior version. The dampening system is similar to an automobile suspension allowing for a smoother more controllable cyclic. The added dampening ( flex ) allows for a pre determined gain and gives an incredible smoother flight performance. This is increasingly important for fixed pitch Helis were the main rotor blades are fixed in position. Kit comes with instructions and all required hardware is included.

The CF Boom is very strong and ultra light and will help achieve significant improvement in the center of gravity of the LMH Heli. The CF is spiraled for additional strength and made of high quality CF. Can be used with belt system no problem.

The tail belt system increases tail response by nearly 30% and so these modified LMH 110 blades will help compensate for the difference in RPM ratio and increase stability on the Corona.

This swashplate is a drastic improvement over the stock part in many ways. First it is much stiffer. The stock plastic swashplate is very flexible. This flexibility decreases cyclic response. The Billet Aluminum Swashplate eliminates this unwanted flex adding a degree of precision unattainable with the stock part. second it is more precise. Precision bearings have virtually no play what-so-ever. And third it does not require adjustments (as the stock part does). Also the stock swashplate is prone to wear out over time. This swashplate should have a very long life!