HeliHobby.com is your source for Remote Control RC Helicopters, products, modifications and more. Full Range of Nitro, Electric and Micro Helis in stock.
Logo 10 revolutionized the hobby with new designs and innovations including a unique rigid frame for a smaller-size electric helicopter. Logo 10 is powered by a brushless motor and with its rigidity power unparalleled in its size class and CCPM mixing the Logo 10 redefines the limits. The Logo is a highly capable machine and it is one of the best mid size Helis available.
- Basic Kit includes the following - 24 ball bearings - 10 mm hollow rotor shaft - 8mm rotor head shaft - 5mm tail rotor shaft - tooth-belt drive - mechanical swashplate mixing - stainless control rods - lightweight finished canopy - explicit assembly instructions - Now includes Auto-hub - Thrust bearings - Pre assembled canopy
- Package is available with or without a transmitter ( TX ) - Berg Micro Crystal for RX included with TX Package only
This discount package comes with the following products: - MIK2287 LOGO 10 Deluxe Electric Helicopter Kit
- HRC171724 Hitec Eclipse 7 with Spectra Module Standalone package
- FUTM0808 Futaba GY401 Gyro with S9254 Digital Servo
- CASTLE-PHX-60 Phoenix 60 Brushless Sensorless ESC
- A30-10L Hacker Brushless A30-10L Outrunner
- HRC25272 Hitec Micro Electron 6 receiver Futaba/Hitec dual Shift
- HH415 12C Hump 14V NiCD CP2400
- HRC31081 Hitec HS-81 Servo and HS-81 with metal gears (MG)
- HRC31081 Hitec HS-81 Servo and HS-81 with metal gears (MG)
- HRC31081 Hitec HS-81 Servo and HS-81 with metal gears (MG)
- CRXXHTC CH-XX Match TX
- MIK2813 13 T Pinion Gear Logo 10
- WSD1300 Large Deans Ultra Plugs
Save over $57.37 with this exclusive discount package
LOGO 14 3D Carbon Electic Helicopter Kit
A Large 50 Size Electric Heli
The Logo 14 is a high end powerful machine packed with innovations in design and performance. Carbon Frames and hardened head design come standard in the Logo 14. Many pilots have wanted to fly a larger electric helicopter with just one battery pack. The waiting is over! The new LOGO 14 is a single-pack electric helicopter designed for 550 to 570 mm blades. Using a stronger rotor head of its big brother The LOGO 24 and it has flight properties matching those of a 50-sized helicopter. The LOGO 14 has a driven tail to ensure full control with the motor turned off. This allows 3D pilots to perform impressive inverted and backwards autorotation maneuvers. A particularly innovative feature is the main gear box which fully encloses both main gears to protect them from dirt and to reduce noise. The extremely rigid carbon fiber main frame features removable servo mounts and a carbon battery brace for proper support of the battery pack. There is ample space for the placement of the receiver speed controller and gyro. The canopy of the LOGO 14 is another highlight: It wraps completely around the top half of the chassis which not only makes for a streamlined look but also guarantees maximum flight velocity. An opening on either side of the canopy aids in the direct cooling of the motor and speed controller during flight.
- Driven tail for autorotation - Main gear box - Lightweight and extremely rigid carbon main frame - Removable servo mounts - Carbon battery support - Carbon horizontal and vertical fins - Carbon shock protector (protects gyro and tail rotor servo) - Carbon tail boom brace - Aluminium swash plate) - Hollow 8 mm spindle shaft - Hollow 10 mm main rotor shaft (hardened) - Thrust-bearing for rotor head - Light-weight 3.5 mm stainless steel stabilizer bar - Light 3D stabilizer paddles - All levers ball-raced - Note: Logo 14 kit does not include rotor blades motor pinion speed controller or radio control. These components must be purchased separately.
Aluminum Blade Grips for Logo 10 with Lower Thread
For Logo 10
The logo 10 is a marvelous machine but it was not designed to be used with lithium high capacity battery packs. Powered by Lithium the Logo 10 becomes ballistic with extremely high RPM rotor disk and enormous power. These blades were designed to replace the plastic stock blade grips and so they Logo 10 can now handle the extreme rotor disk with the fear of a blade grip detaching or loosening due to flex during flight. If you fly with CG or GF main rotor blades these blade grips are a must. The blade grips also have a built in lower thread and so this is a cleaner installation over stock part.
- Designed to withstand very high loads - No need for nut to hold main rotor blades - Anodized blue - Direct replacement of stock part - Machined from a single block for ultimate strength and rigidity
Logo 10 3D Helicopter kit with rotor blades
CCPM Ready
Looking for the ultimate in 3D flight and some serious aerobatics ? The kit ss completely upgraded with extras such as CNC Swashplate CF Stabilizer 3D Paddles and much more. Unparallel performance and quality. Logo 3D kits edition was completely redesigned to achieve the higest quality machine possible. With a new rotor head and longer lever system. A new canopy for better aerodynamic properties and 3D stabilizers the the Kit is simply the best electric mid size Heli available !!!
- 120 eCCPM Aluminum Swash Plate - Carbon Stabilizer Kit - 3D Blade Dampeners - 3D Paddles - CF Boom Support - BB Mixer Arms - Fiberglass Main Blades - Autoratation hub - Hollow main rotor shaft (10mm) - 8mm spindle shaft.
