|
Characteristic of Dexterity 3DX Helicopter
- Dexterity 3DX Helicopter is a kind of R/C electronic micro helicopter. It has collective pitch and adopts 120°CCPM (SR-3 or other compatible mode) control mode.
You need to use a transmitter with CCPM program mixing functions, more than 6 channels and work in PPM mode.
- If your transmitter doesn’t have program mixing function or you don’t want to setup on your own transmitter, you can choose to buy the version with BLUEARROW 3 in 1 MixingBoard.
If you choose the version with BLUEARROW 3in1 MixerBoar, there is no need for you to buy separate gyro and ESC.
- Although you are an expert on helicopter flight, we also suggest that you read Dexterity 3DX Helicopter Setup Manual. Through that manual, the instructions and settings can guarantee that this Dexterity 3DX Helicopter is in good flying performance.
- To make sure that you can setup right and fly well, Dexterity 3DX Helicopter Setup Manual will show you how to set up and debug Dexterity 3DX Helicopter.
- For more information about detailed structure of Dexterity 3DX Helicopter, please read structure diagram of Dexterity 3DX Helicopter.
- If you are a beginner or you don’t have much experience of flying electronic helicopter, please ask for advice from people who have such experience or you can set up Dexterity 3DX Helicopter’s throttle curve, pitch curve and program mixing by yourself.
- The helicopter must be in right setting. Without correct setting, you cannot fly it well.
- BLUEARROW only guarantees that Dexterity 3DX Helicopter would have good flying performance on the premise that you use the whole helicopter right and all the electronic parts are produced by BLUEARROW. Any arbitrary change will go beyond this guarantee.
- Thank you again! Your support is prime mover of our advancement. We innovate and make progress constantly for the final aim that flying enthusiasts will have products of perfect shape, good quality and reasonable price.
Capability
- Flying area: Indoor, lawn without wind or wind speed lower than 3rd class , garden.
- Flying time: more than 8 minutes (determined by the batteries used), we suggest you to use 150mAh 11.1V Li-Poly Battery.
- Flying attitude: hover flight, forward flight, inverted flight, side rolling and sideward flight and so on.(parts of action’s implementations depend on users’ skills and flying experiences.)
Materials
- Fuselage: high-strength Nylon, ABS engineering plastics, high-strength carbon fiber pipe/pole
- Rotor blade: high-strength light foam, Blasa blades. (The Standard Outfit is with high strength light foam.)
- Packing: Aluminum alloy box/ Carton box
Specification
- Fuselage length: 270mm/ 10.8in
- Height: 98mm/ 3.9 in
- Diameter of main rotor blade: 300mm/ 11.99in
- Diameter of tail rotor blade: 82mm/ 3.28in
- Main gear ratio: 78:7, you can also choose 6, 8 or 9 gears according to your need.
- Tail gear ratio: 50:9
- Whole weight: 54g/1.9 oz (batteries not included)
Configuration (all the following configurations are equipped with this helicopter except the transmitter in the RTF version )
- Transmitter: more than six channels and CCPM 120° control mode (you should prepare for it by yourself)
- Receiver: R3P6-J BLUEARROW micro light receiver (The receiver can be compatible with JR/Futaba and other transmitters.)
- Gyro: BLUEARROW G2J1 micro light GYRO (without tail lock function)
- ESC: BLUEARROW BA PP 3A 2-in-1 (5A for Main prop and 3A for tail prop)
- Servo: BLUEARROW BA-TS-3.6 micro servos 3pcs
- Battery: 150mAh, 3S(11.1V) Li-Poly battery. (We don’t recommend battery with high capacity, as it would add the weight of flight weight), but you can choose 200mAh-250mAh 3S 11.V Li-Poly battery.
- Main motor: BA-BL6200 carbon shell motor with high performance
- Tail motor: BA-BLK20 carbon shell motor with high performance
Accessories(along with the helicopter)
Aluminium Case X 1
Main Rotor Blade X 2
Strut X 1
Tweezers X 1
Screwdriver X 1
Screw X some
BA-CH550 Balance Charger X 1
The Accessories Available With Dexterity 3DX Helicopter
Aluminium Case X 1
Main Rotor Blade X 2
Strut X 1
Tweezers X 1
Screwdriver X 1
Screw X some
BA-CH550 Balance Charger X 1
|
