N a v i g a t o r 

The CF Blades are much stiffer than the plastic blades and will greatly reduce the conning effect which makes the Helicopter pitch up during forward flight. The blades are pre balanced and will allow for better flight control. Mounting washers included.

^{Available from two manufactures: Rotor Tech or from MAH, choose your preference}

For Fixed Pitch Micro Helis

These MAH carbon blades are expertly molded. They come pre balanced and ready to mounted. These blades will improve hover and forward flight plus they look awesome The blade is designed with additional weighted tips to

For Collective Pitch Micro Helis

These MAH Carbon main blades for the Piccolo CP/Pro are expertly molded and balanced. They are semi-symetrical and have a beautiful finish. They will give more lift and are more efficient than symetrical blades. Perfect choice for scale and general flying.

Available for all Micro Helis with Dual Motors

Made from carbon fiber plates and bonded to the boom using CA. The set include both a vertical and horizontal fin set. Improve your flying control and assist lift and drag with these high quality fins.

Made from carbon fiber plates and bonded to the boom using CA. The set include both a vertical and horizontal fin set. Improve your flying control and assist lift and drag with these high quality fins.

Extra thin and very crash resistant fin set. Made from carbon fiber plates and bonded to the boom using CA. The set include both a vertical and horizontal fin set. Improve your flying control and assist lift and drag with these high quality fins.

Made from carbon fiber plates and bonded to the boom using CA. The set include both a vertical and horizontal fin set. Improve your flying control and assist lift and drag with these high quality fins.

Made from carbon fiber plates and bonded to the boom using CA. The set include both a vertical and horizontal fin set. Improve your flying control and assist lift and drag with these high quality fins.

Made from carbon fiber plates and bonded to the boom using CA. The set include both a vertical and horizontal fin set. Improve your flying control and assist lift and drag with these high quality fins.

For the Piccolo

Kit includes stabilizing fin and tail guard fin. The fins are made of light fiberglass G10 material and can be screwed or CAed onto the boom.

Enlarge

G-10 Plate assembles into a vertical and horizontal fin set for improved flying stability and better looks.

Made from carbon fiber plates and bonded to the boom using CA. The set include both a vertical and horizontal fin set. Improve your flying control and assist lift and drag with these high quality fins.

Made from carbon fiber plates and bonded to the boom using CA. The set include both a vertical and horizontal fin set. Improve your flying control and assist lift and drag with these high quality fins.

Made from carbon fiber plates and bonded to the boom using CA. The set include both a vertical and horizontal fin set. Improve your flying control and assist lift and drag with these high quality fins.

Machined Carbon Fiber plate with a boom holding rubber band so you can fold your main rotor blades when carrying your Heli around.
Especially recommended for Collective Pitch micros such as the Zoom / Shogun, Piccolo CP, Hornet CP etc.

For the Piccolo FP / CP / Pro

The Outer frame retrofit installs around the stock plastic chassis and adds a reinforced base to the stock chassis. The reinforced base connects to rubber like struts which are indestructible. Each strut hooks onto a skid.
The Frame takes all stock Piccolo FP / CP / Pro parts and it is a direct replacement. Best of all the frame adds additional mounting space in the front and rear and it is ready to mount your electronics. If you are using separates you may use the back plate for Gyro mount. The frame is made of G10 material which ultimately produces a light yet strong installation base.

This 1.5 mm thick carbon frame stiffener is made to reinforce the main frame. A more ridged frame improves stability when a high power motor is used. Other advantages include improved stress handling during aerobatics and helping to keep the pinion to main gear mesh very consistent.

Enlarge

The MJP CF Duct Fan Mounting fin set will allow for a secure installation of the duct system and comes equipped with two zip ties which slide through the pre-drilled slots on the CF plate. The zip ties securely mount the system against the boom and the duct ring is CAed onto the CF plate.