The Battman 6s balancing charger is being grouped with 2 x 2200mAH 3 cell Lithium Batteries in this offer with a bonus free Lipo Safe Charging bag. The built in balancing function of the Battman charger works to protect your battery cells during the charge cycle and will finish the charge with perfectly balanced cells. It is so hard to believe we are going to say it again. A Lithium Balancing Charger + 2 Lithium batteris for your 450 for under 100 bucks!

This RJX electric conversion kit is very nicely done with 700E etched out beautifully on the bottom carbon fiber plate. The drill plate included with the kit makes creating the holes simple leaving a beautiful installed motor plate for your now Trex 700 Electric. We have included the Scorpion 4035 500 KV motor with Rhino 16T hardened pinion using the lower KV to get a larger pinion gear to eliminate gear stripping issues. We have include the Castle Creations Phoenix 110HV ESC with Phoenix Link USB cable so you may customize the ESC response as you wish and all through your PC. We have even thrown in a Series cable so you may use 2 x 6s 5000mah Lithium Polymer batteries to power your new Trex 700 Eleectric!

325mm Glass Fiber Blades designed by Lightning Power with the goal of making a low cost 3D ready blade available. Made of High-Grade materials using a proven design these blades make a great choice over the wooden blades.

Two Free Batteries with either version!

Weighing in at under one ounce, the nimble Blade® mSR Bind-N-Fly takes ultra-micro helicopter performance to the next level and it comes from the factory completely assembled and flight tested. Its unique Bell-Hiller rotor head design provides the kind of speed and agility you would expect of a single-rotor heli but maintains a measure of positive stability similar to a co-axial heli. This blend of agility and stability makes it the ideal “next step” for someone moving up from a coaxial heli, such as the Blade CX3 or Blade mCX.

Exclusive HeliHobby Bonus Package included!!

The Blade® 400 3D is designed to give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes 100% factory built and flight tested so you can get flying right away. There is nothing left to assemble or set up. The Blade 400 3D is ready for hovering and 3D aerobatics as soon as you finish charging the battery. And you can fly it just about anywhere, anytime thanks to the included Spektrum™ 2.4GHz DX6i radio system that avoids interference with other RC users, even those on other 2.4GHz systems. You also get the benefit of the DX6i’s advanced DSM2™ protocol that provides the kind of locked-in, solid response that will let you fly even the most demanding 3D maneuvers with absolute precision.