These paddles provide the ultimate in cyclic response while sacrificing very little stability. Featuring a beautiful carbon fiber weave finish these paddles look as good as they fly. Suitable for any helicopter with a 4mm flybar. A new non-threaded retaining system allows for ease of adjustability while allowing more refined adjustment as compared to conventional threaded paddles.

High quality Carbon Fiber fin set for 3D flying. Ultra light and very strong the vertical and horizontal fin set come highly recommended.

Inexpensive vertical and horizontal fin set with pre drilled holes for boom clamps will make your flight more stable and your Heli more attractive with this beautifully finished fin set.

High quality Carbon Fiber fin set for 3D flying. Ultra light and very strong the vertical and horizontal fin set come highly recommended.

This is a multi purpose 5.5mm carbon fiber tubing / rod which may be used as a tail push rod boom support camera mount support and for many other applications. The rod is 260 mm long and may be cut with a dremel to fit many other hobby needs.

High quality Solid Carbon Fiber fin set for 3D flying. Very strong vertical and horizontal fin set.

Raptor Carbon Frame set. If you want to have the lightest machine possible and produce even higher G’s this complete Carbon Fiber set from NHP will help you reduce the total up weight hence easing the work load of your motor and giving you more power at your fingertips.

High quality Carbon Fiber fin set for 3D flying. Ultra light and very strong the vertical and horizontal fin set come highly recommended.

A slick smooth carbon fiber boom for the Raptor .30 - .90 available from several manufact - urers. The boom is very light and rigid allowing the flyer to dominate 3D aerobatic maneuvers due to the overall weight savings. The lighter the tail of the Heli the faster the flyer can perform pirouettes and other tricks. Install this beautiful carbon fiber boom on your Raptor. The boom is a direct replacement and fits right in. Carbon Fiber is strong and light and it is a great choice for a high end setup. Another added advantage of a carbon boom is the ability to reduce the total up weight of the rear of the Helicopter. This allows the flyer to achieve a better CG ( Center of gravity ) with ease thus the machine is easier to hover and fly. Although this product is available from multiple manufacturers the basic design is the same. HeliHobby carries only the top quality woven carbon versions so you can be assured you are getting a high quality product regardless of the manufacture.

This plate will stiffen your overall Raptor assembly / chassis while lightening the total up weight. The upgrade is available for the Raptor .30 .50 as well as .60 / .90. The .30 and .50 size base plates also include two holes for those who wish to have the added motor mounts thus giving a super rigid Heli.

Remove plastic flex and add rigidity throughout your Helicopter ( Raptor 30 ) using this stylish looking frame stiffener from NHP. The stiffener also includes a shroud extension.

Remove plastic flex and add rigidity throughout your Helicopter ( Raptor 60 ) using this stylish looking frame stiffener from NHP.

Carbon Graphite struts set for any .30 - .90 Size Helicopter. These struts are the only struts in the market which use aluminum clamps to mount the skids to the struts. This method allows for the most crash resistant configuration while maintaining a strong connection between the struts and the skids. The skids are made of strong and light aluminum which is black powder coated for a beautiful finish. The carbon struts are manufactured from the highest grade CF material produce a beautiful finish on both the upper and lower strut profile. Available in complete kits ( with everything included ) with your choice of standard short or long skids ( struts are the same universal size ). Also each component is also sold separately so incase of a crash you may order only what you need. For best looks use the short skids for .30 size Helis standard skids for .50 size and Long for .60+ Size ( but you may mix and match as per your style also remember that longer skids allow for a more stable landing surface ).

Remove plastic flex and add rigidity throughout your Helicopter ( Raptor 60 ) using this stylish looking frame stiffener from NHP. The stiffener also includes a shroud extension.

You can now upgrade to a Carbon Fiber Cooling Shroud Extension from NHP.

Carbon Graphite Undercarriage Set for the Raptor 60/90. Very nicely molded set with carbon struts with rounded bottoms for secure fit to skids. The skids end with closing caps and all installation hardware is included in kit.

Install this CF base plate in your Raptor for additional frame rigidity and better support.