Raptor 30 Ready-To-Fly Super Combo Nitro Helicopter
Complete nitro package!
This is a great introduction to nitro helicopters. The Thunder Tiger Raptor 30 V2 is a well proven tried and tested airframe developed by Thunder Tiger. This package comes complete with the helicopter, motor, radio, servos, gyro, blades and everything you need to fly except for fuel. This helicopter performs wonderfully and the combo package offers huge savings.
Included:
- Raptor 30 V2
- PRO-39H(R) Engine
- Sky Tech T6i Tranmsitter (Including Tx/Rx battery and charger)
- S1903 Standard Servos
- DS0606 Digital Rudder Servo
- TG-7000 Heading Lock Gyro
- Thunder Tiger 550mm Wood Main Rotor Blades
Raptor 30 V2 Sport Kit 29BB without Engine
Item not eligible for free shipping. Shipping cost will be added
Raptor .30 release V2 kit is available as an assembly kit or as an almost ready to fly package. The Raptor .30 is the most popular Helicopter in the world and is available in several versions so choose from the one that's right for you. Versions to choose from include engine ( PRO3 ) 29 ball bearing vs 49 ball bearing as well as assembled or none assembled including all combinations in between.
- Full Length of Fuselage: 1150mm - Full Width of Fuselage: 140mm - Total Height: 400mm - Main Rotor Dia: 1245mm - Tail Rotor Dia: 236mm - Gear Ratio: 1:9.56:4.57 - All Up Weight: 6.6 lbs. (3kg)
Item not eligible for free shipping. Shipping cost will be added
The Raptor 50 Titan combines all the key features needed for Extreme 3D flight. Whatever the maneuver we are sure you will feel the performance that the Titan provides. This model was designed and engineered by the World-renowned Mr.Shigetada Taya. It combines elements of his previously successful designs with today's advanced technologies. Combined with all the features of Raptor 50 V2 the new Raptor 50 Titan adds more new features - longer tail boom to fit 620mm blade push-pull system for collective pitch control and elevator control rear mounted tail rotor servo plate harden main shaft and more. With all the new features included the Raptor 50 Titan has the best power-to-weight ratio and accuracy control system of any 50 class helicopter in the market. For 3-D pilots Raptor 50 Titan will make you enjoy executing crisp maneuvers like: Climbing Tic-Toc Chaos Death Spirals and any other radical maneuver that pilots can dream of. Beginners and advanced 3-D pilots will be impressed with this new Raptor The Raptor 50 Titan.
We don't carry Raptor kits any longer. We only carry parts.
We don't carry this kit any longer.
799.99
PART#TTR4891-K10
- Comes standard with the following upgardes: - Metal Button Head on Rotor Hub Metal Swashplate - Metal Blade Grips Metal Washout Base - Metal Side Frame Stiffener Metal Cooling Fan - Metal Fork Metal Upper/Lower Bearing Block - Metal Elevator Control Lever Metal Flybar Control Arm - Carbon Graphite Control Arm Set Carbon Side Frames - Carbon Tail Fins Carbon Tail Boom - Carbon Tail Boom Support Carbon Torque Tube
- Specifications: - Length of Fuselage: 55.5 inches - Width of Fuselage: 7.48 inches - Total Height: 18.75 inches - Main Rotor Diameter: 62.2 inches - Tail Rotor Diameter: 10.24 inches - All Up Weight: approx. 10.5 lbs.
Did you crash or wear out some parts on your favorite .30 Raptor ? Well this kit probably has everything you need.
select checkbox below:
Raptor 30 Lite Crash Kit with Main Blades 89.95 Raptor 30 Lite Crash Kit without Blades 44.95 Raptor 50 Lite Crash Kit with Main Blades 59.95
- Kit contents: Spindle Flybar Rod Tail Pitch Slider Flybar Paddle Tail Rotor Blades Tail Fin Main Rotor Blades Tail Control Rod Main Shaft Tail Boom
Raptor 50 ro eRaptor Electric Conversion Kit
Designed for Raptor .50
Convert your Raptor into an eRaptor and enjoy smoke free flight no oils to clean and excel your machine into new power levels with longer flight times. The high Power driving system is comparable with the most powerful combustion 50 size powered Helicopter. The conversion kit allows you to install the kit without the need to interfere with the original structure of the helicopter thus allowing the modeler easy installation and assembly. Electric flight is the way to go and now you can convert your favorite Raptor to and Electric beast. The kit comes complete with everything you need ( except Lithium batteries which are sold separately ) including a Super powerful 50 size MS outrunner Motor tested and approved for this application as well as matching rated BL Speed controller. All hardware and accessories are CNC machined and are of a perfect fit. Designed around the Raptor .50 this conversion can be made to work on the Raptor .30 with a bit of modification to the original design of this conversion kit.
489.95
PART#PS-R50
- Brushless Outrunner Motor POWER 50 - High Power Speed controller - Main gear - Pinion - Cooling fan - Mount accessories
Crash Kit R30 V1
.30 size nitro Heli
Did you crash or wear out some parts on your favorite .30 Raptor ? Well this kit probably has everything you need.
58.95
PART#TTR3806
- Kit contents: Spindle Flybar Rod Tail Pitch Slider Flybar Paddle Tail Rotor Blades Tail Fin Main Rotor Blades Tail Control Rod Main Shaft Tail Boom
Raptor 50 Conversion Kit
For the Raptor V1
The most basic parts that every flyer must have extra of at any time include main blades spindle main shaft flybar and boom and it is exactly what this kit includes.
89.99
PART#TTR3807
- Blades includes in kit are CNF5533 Funkey Fiberglass 550mm 3D Symmetrical blades. All shafts included in kit are hardened shafts.
Raptor 60 V2 Crash Kit
For the Raptor V2
Designed to get the Raptor 50 back in the air with minimum amount of fuss the crash kit is a convenient and cost effective package which contains the parts that commonly require replacement after crashing the V2 50.
119.95
PART#TTR3809
- Kit includes Main Shaft. Spindle Flybar Landing Gear Strut Tail Pitch Control Fork Tail Control Rod Tail Rod Guides Tail Support Rod Ends Tail Boom Ball Link
Raptor 80/90 Conversion Kit
.60 size nitro Heli
The Raptor 60 to 80/90 Conversion Kit quickly converts a Raptor 60 helicopter for using 80/90 size engines. The benefit of a bigger engine is lower engine rpm and a quieter flying model. Of course a bigger engine means your Raptor 60 will fly even faster and climb like a rocket.
199.95
PART#TTR3822
- 11 Tooth Clutch Bell Pinion New Clutch System (larger clutch larger clutch bell liner Long Aluminum Tail Boom Long Stainless Tail Driver Shaft Long Push Rod Carbon Tail Boom Supports Two Bearing Supports in the Tail Boom 550cc Fuel Tank
Crash Kit R30 V2
.30 size nitro Heli
Get back in the air in no time. Convenient and cost-effective package that contains all of the parts that commonly require replacement.
57.95
PART#TTR3831
- Kit contents: Spindle Flybar Rod Tail Pitch Slider Flybar Paddle Tail Rotor Blades Tail Fin Main Rotor Blades Tail Control Rod Main Shaft Tail Boom
Raptor 30 V2 Conversion Kit
.30 size nitro Heli
The v2 conversion kit will enable you to easly migarte your existing Raptor into the new V2 release.
179.99
PART#TTR3832
- Kit contents: Main Frames Clutch Bell Clutch Starter Shaft Starter Coupling Main Rotor Grips Thrust Bearings Swashplate Main Rotor Hub Tail Boom Support Pinion Gear Fuel Tank Pitch Control Arm Elevator Arm Tail Fin set Spindle Tail Rotor Grip Tail Rotor Hub Tail Rotor Bearings
Raptor 50 V2 Crash Kit
For the Raptor V2
The Raptor .46 to 50 Conversion Kit quickly converts your Raptor to a larger machine with all neccassey parts included. The conversion kit includes a cooling fan hub and a .46 / .50 engine mount designed to fit the larger size engines. It also includes longer 600mm length wood blades 85 tooth gear and a 10 tooth pinion and of course a longer boom.
21.99
PART#TTR3833
- Kit gives the builder the option in choosing a short or long boom for your new large beast.
Raptor 50 SE v2 49BB Pro Kit No Engine
Item not eligible for free shipping. Shipping cost will be added
Raptor 50 SE available with lots of upgrades. The amazingly popular Raptor 50 V2 is available for hard core pro flyers with this fully loaded kit 50 size 3D Heli. One piece metal button rotor hub metal washout 25g 3D light paddles stainless steel flybar carbon fins carbon base plate simulated carbon windshield new decal and much more.
select checkbox below:
Raptor 50 SE v2 49BB Pro Kit No Engine 917.99 Raptor 50 SE v2 49BB Pro Kit with Engine 649.00
- Full length of fuselage: 1150mm - Full width of fuselage: 110mm - Total height: 400mm - Main rotor dia: 1345mm - Tail rotor dia: 230mm - Gear ratio: 1:8.5:4.56 - Full Equipped weight: 2920g (6.4 lbs)
The 60 size Raptor for the increased power and stability as this large Raptor will dominate the sky above. Now from the drawing board of world famous Shegitada Taya and the ultra-modern manufacturing facility of The Raptor 60. Engineered and produced with the same talent as the modern equipment that resulted in the machine that captured the 30 size Heli market worldwide the Raptor 60 provides the excitement and performance of a larger more powerful version. All of the features that made Raptor a household word in the R/C helicopter world are incorporated in the 60 size version. Perfect for the novice who needs a predictable stable Heli. It also will provide awesome performance that is demanded by the most expert 3D pilot. Raptor .60 is available with or without Engine and as a kit or as an almost ready to fly machine.
select checkbox below:
Raptor 60 Almost Ready To Fly RII (ARTF) 574.95 Raptor 60 ARF w/PRO-70H RII 735.99 Raptor 60 Basic Helicopter Kit RII ( Kit Version ) 439.99
- Full Length of Fuselage: 1370mm - Full Width of Fuselage: 190mm - Total Height: 18.3 inches 465mm - Main Rotor Dia: 1380-1540mm - Tail Rotor Dia: 260mm - Gear Ratio: 1:(7.75-9.1):4.668 (.50-.60) - All Up Weight: 10.3 lbs. (4.015 kg) - Engine: .60-.70
The largest beast in the sky the Raptor .90 is sure to amaze you with its extreme power superior design. Raptor 90 is the ultimate 3D helicopter borrowing its simplicity construction from the Raptor 60. The Raptor 4890 R90 STD Features: Metal Swashplate Metal Washout Base Metal Tail Pitch Slider Heavy Duty Clutch Carbon Base Plate Longer Aluminum Tail Boom Longer Tail Boom Support Longer Tail Drive Shaft Two Bearings Support Modified Flybar Control Arm 550cc Fuel Tank Header Tank New Decal. First you will notice new color of this high quality machine. It is gunmetal aluminum finish that is sleek and attractive. Combine great looks with the new rotor head design which incorporate various seesaw ratios to increase or decrease cyclic response. Next you'll notice the ball links on all control surfaces have thicker radius. Other features include 550cc main tank header tank and two pinions 11 and 12 tooth. Larger clutch assembly combine with a new fan shroud enabling most any engine the ability to just bolt in place. The Torque tube has been enhanced by pinning the insert on fore and aft end of the torque tube. Further you will find the metal mixing base to be a big plus by the eliminating of free play. Another great feature for those who are using Li-poly batteries is the long servo tray which allow perfect center of gravity. We must not forget about the aluminum swash which is included.
HeliHobby.com is your source for Remote Control RC Helicopters, products, modifications and more. Full Range of Nitro, Electric and Micro Helis in stock