This is the Gorilla Grip compact 7pc foldup metric drive set (Metric). Perfect for any size Helicopter, from T-Rex to the full size Raptor. Features maximum strength Protanium Steel construction: High Torque Steel that's 25% stronger than the competition. Corrosion resistant black Proguard finish creates crystalline structure that doesn't allow water to penetrate. Precision tip eliminates cut off burr problems. The rotation feature: 90 degree stop feature converts the tool into a non-stop, time-saving spin wrench. Space age composite handle that's stronger than steel. Lightweight ergonomic design handle is not temperature sensitive when working in extreme hot and cold conditions with bare hands. Turn and Flip feature: means not having to disengage the tool from the fastener when working on helicopter hex screws such as blade grips and chassis assembly. Tool isolating flutes and adjustable key tension.

This is the Bondhus Six Piece Balldriver Set (Metric) w/ ProHold Tips. FEATURES: Black hardend steel shafts with Red durable plastic handles.

This tool will help you make your own push rods for linkage systems. 2mm Cutting Die w/handle. Now you can easily make your own rods with a threaded end. Fix old push rods or make custom length rods with this cool little tool. The hard handle insured a proper grip and the Complete kit is a must have for any true hobbyist.

Electric pilots who fly micro or mini helis need convenient, inexpensive and reliable tools to keep their machines in top shape. E-flite offers this 6-piece Heli Tool Kit to fit their needs. FEATURES: Includes 2.5mm ball driver, 2mm hex driver, 1.5mm hex driver, 2mm flat screwdriver, plus #0 and #00 Phillips screwdrivers. Ergonomic rubber-coated easy-to-grip handles.

Top quality pliers are forged from fine-grain tool steel, machined to close tolerances with hand-honed cutting edges properly hardened. They are polished, adjusted and inspected. Perfect for the Hobby these multi purpose cutting pliers come very handy.

No benchtop is complete without these super-strong stainless-steel bent-tip scissors that snip, cut and trim practically anything. Especially useful to cut canopies and fuselages as the curved scissors help you get to places which you normally have to use a knife to get to.

One of the challenges in setting up the R/C Heli is keeping the Swashplate in a true balance parallel to the ground while setting up linkages and the flybar. This Swashplate alignment tools does just that. It uses a powerful magnet to hold the Swashplate leveled against the main shaft while working on it.

Use these spring action curved tip pliers for easy installation and removal of all plastic ball links. Ball links are the core connection style for all rods and links in remote control Helis. Properly installed and removed of ball links insure a smooth running setup which ultimately results in a smoother running helicopter.

Handles round brass, aluminum and copper up to 5/8 inch. Nylon body helps reduce friction. Cuts tubing without crimping.

Quickly and easily connect and remove plastic ball ends for adjustments without damaging the parts. These pliers are made from high grade carbon Steel and include a self adjusting spring for additional help when making adjustments. Designed to work with all ball links.

You Helicopter deserves only the best parts, and these parts can benefit from the best tools. This combo pack from MicroHeli (MH) hex kit comes with the most popular size wrench set using carbon Steel 3mm Hex Nut.

The MicroHeli ball link sizer 3.5mm is designed to help easily resize the undersized plastic ball linkages. The tool is made of steel and and anodized for long lasting and rust prevention. A very useful and handy tool for your micro helicopter tool box.

This kit properly locates the mounting hole in the popular Hitec HS-56 servo. To use, break off the unused tabs, slip the carbon template over the servo, mark the holes with the supplied bit, remove the templete (to prolong its life) and finish drilling the holes.

Handy, interchangeable screwdriver set. Perfect for any size Heli this screw driver set includes a total of 14 different interchangeable drivers including hex, Phillips flat heads and more. Specifically distributed by TTR for RC Helicopters this kit includes the most common size screw drivers you will need to work on your Helicopter. The complete kit comes in a compact case which makes it ideal for your tool kit.

Gear puller from E-flight. Fits all shafts from 1mm to 5mm. High quality chrome finish. Makes removing shaft pinions a breeze. The puller is chrome plated and it is perfect for both Micro Helis such as the Blade CP and 400 size Helicopters such as the T-Rex or X-400. Comes with three puller adapters to accommodate multiple size pinions.

No more messing with those hard to get out pinions. Simply choose the right size puller ( 3 included ) and push that pinion out of shaft. Click on enlarge image to view the available sizes for this Micro and standard pullers.

The Universal Pinion Puller makes pulling a stubborn pinion off a motor's shaft an easy task. Don't pull your hair trying to get it out...just select the right tool for the job. The puller has long twisting arms so simply twist slowly and push the pulling pin through the center of the pinion and snap it out.

The Hardened-Tip Hex Driver 0.9mm is a very handy tool to have around, especially when working with Micro Helis. The 0.9mm is so small that most Allen keys will destroy the socket head screw. However this high quality 0.9mm hex driver features a secure grip handle and a high quality hex tip so you can tighten those very small socket head screws without destroying them.

The perfect tool kit for any owner of a 400 size helicopter. It comes complete with both Phillips and socket head drivers. Replacable drivers and a hard CNC anodized handle. Available in both 6 pcs or 3 pcs kit. Perfect for Helicopters such as the T-Rex Superior edition, MX-400 and others. Stop searching for those are to find tools and have everything available in one complete tool set. The 6 pcs set comes complete with two grips and 3 hex driver and 1 Phillips driver. The 3 pcs set comes with one handle, 1 hex driver and 1 Phillips driver.

Includes straight point, straight spring style, angled spring style, and duck bill tweezers. You no longer have to fight to get a screw into position, or holding a wire in place while soldering or removing a spacer, these are just a few of the countless uses you will find for you 4 Piece Stainless Steel Tweezers Set.

Duratrax Secure Grip Pliers features non-slip, no scratch covers. The kit comes complete with two sets of covers ( black and red ) so you can use one set for delicate jobs ( such as ball links and plastic parts ) while using the other covers for rough jobs ( such as when twisting metal links ). Regardless the covers will insure you do not damage your RC Helicopter parts.

Designed for quick installation and removal of ball links. The curved tip allows for easier access to hard-to-reach areas. Made of hardened steel with vinyl-covered handles, this is a high-quality heli tool at a great price!

Shot loaded to prevent rebound. Use wherever danger of scratches or marring exists. Excellent for working with aluminum parts and drive shafts. Steel reinforced construction is completely covered leaving no exposed metal. Handle has a flanged butt for a more secure grip. Installing main shafts, spindles and shaft collars is now a breeze and its safe for your parts.