 |
 |
|
|
|
 |
 |
 |
 |
 |
 |
|
Free Shipping on US orders over $100
|
|
|
|
see product description for exceptions on certain oversized items
|
|
|
|
<<    <    1    2    3    4    >    >>
Page 2 of 4
 |
|
 |
 |
|
Spektrum DX6i 6 Channel Full Range Transmitter
|
|
|
 |
 |
|
The DX6i takes 6-channel computer radios to a whole new level.
|
|
 |
|
The DX6i uses the same full range DSM2 technology found in the Spektrum DX7 and includes an impressive list of programming features for both airplanes and helicopters. You have the choice to get it with the new AR6200 DSM2 6-channel receiver that is robust enough to use in large models yet compact enough fit in many park flyers. It also comes “Transmitter Only” meaning without any receiver. Please see the features / specs below for more information.
|
|
|
 |
 |
|
DX7 Special Edition Tx Only MD2
|
|
|
 |
 |
|
2048 Resolution!!
|
|
 |
|
Take the already groundbreaking features of Spektrum’s DX7 radio system, including the unmatched clarity of DSM2™, ModelMatch™ and ServoSync™…then take it to the next level specifically for cutting edge heli pilots. The result is the DX7se. It’s about way more than looks.
|
|
|
|
|
|
 |
 |
|
DX7 7-Channel Heli Transmitter by Spektrum
|
|
|
 |
 |
|
You will never need to worry about channels again...
|
|
 |
|
With the DX7 you’ll be able to fly anything from micro electric helis, to big gas-powered IMAC planes without regard to frequencies and free from fear of interference. Calling this kind of thing “revolutionary” just doesn’t cut it. It is nothing less than a quantum leap in RC technology that will change how you fly forever. Never again will the availability of a frequency pin dictate when you can take off. Never again will you have to ask, “What channel are you on?” Never again will your flying experience be interrupted by model-generated RF noise, interference from commercial broadcast towers, or anyone on another RC system.
Transmitter Only doesn't include a receiver
|
|
|
 |
 |
|
X9503 2.4 Heli Tx with R921 Rx No Servos MD2
|
|
|
 |
 |
|
Upgraded version of x9303!
|
|
 |
|
Key Features
* 3 year warranty
* 50 model memory
* Throttle timer start up
* Spektrum DSM2 2.4Ghz RF link
* Model Match
* Proven JR 9303 transmitter programming
* Back-compatible with all Spektrum receivers
* Now includes back light screen for greater visability/readability of the screen
Overview
Combining Spektrum’s industry-leading 2.4GHz DSM® technology with proven JR 9303 transmitter programming with optimal features creates this impeccable radio. Additional features such as 50 model memory, model match, and back-compatible with all Spektrum receivers makes this model a great value. Furthermore, the highly requested throttle timer start up feature added to the advanced functions of the X9303 and a back light screen also increases visibility and readability on the display provides top of the line features to this already great radio. Enthusiasts can appreciate this JR radio regardless if a beginner or experienced hobbyist.
|
|
|
|
|
|
 |
 |
|
JR 11X 2.4GHz Transmitter with R921 Receiver : Mode 2
|
 |
|
The JR 11X 2.4 comes with just about everything you would expect in a pro-class radio. Things like an extensive list of programming options, 30-model memory, a big backlit display and a eye-catching case worthy of its capabilities. The only thing it lacks is the one thing you won’t miss - a pro-class price tag.
|
|
|
|
|
|
 |
 |
|
JR 12X 2.4GHz 2048 Resolution 12 Channel Heli Transmitter
|
|
|
 |
 |
|
One of the worlds best radios!
|
|
 |
|
As a product of inspired collaboration between JR and Spektrum engineers, the integrated 12X 2.4 and module-based 12X MV represent a true breakthrough in pro-class radio control. So in addition to flying with the proven security and convenience of Spektrum™ 2.4GHz DSM® technology, you can expect to be flying with the kind of innovative, no-nonsense features you expect from JR®—features devoted solely to the experience of flying with optimized control of your models.
|
|
|
 |
 |
|
Futaba 2.4G Transmitter/RX 6EX Full Range Heli/Air
|
|
|
 |
 |
|
Futaba 2.4GHz with superior full-range technology!
|
|
 |
|
The Futaba 6EX radio is a full range 2.4GHz Fasst system ideal for all types of r/c models here except for CCPM systems. While you may use this radio with these types of helicopters it lacks the subtrim features and is cumbersome to setup for a CCPM swashplate equipped helicopter. We do recommend the Futaba 7C Fasst 2.4GHz radio system for CCPM setups as it supports subtrim on all channels.
Please see the thumbnails below for specs, features and the ad by Futaba RC!
|
|
|
|
|
|
|
INCLUDES:
- Futaba 6EX Transmitter
- NT8F700B 9.6V 700mAh Transmitter Battery
- Battery Charger
- R607FS Receiver
- Switch Harness-Mini J FM
- Neck Strap
|
|
|
6EX-2.4Ghz manual.pdf
|
|
|
|
|
|
 |
 |
|
Futaba FASST 7-Channel 2.4GHz System
|
|
|
 |
 |
|
By Futaba RC
|
|
 |
|
The 7C sits squarely in the middle ground in computer systems. It's a system that offers much of the 9C's set-up versatility matched to 4-channel ease of use. Like all other computer systems on this page, it offers Dial n' Key simplicity for programming, and the 2.4GHz FASST system for an unparalleled RF link. Includes the R617FS FASST 7-Channel Receiver and your choice of (4) S3152 Digital High-Torque Servos or (4) S3001 Standard Ball Bearing Servos. The helicopter version will default to heli settings when powered up and does not have a ratcheted throttle stick. FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts every two milliseconds virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies. Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antennas built into the receiver ensuring that the aircraft stays under constant control of transmitter regardless of altitude. Newly designed Dial-N-Key jog dial with joy stick button allows cursor movement in four directions for very user friendly navigating through menus and programming. |
|
|
|
What is included:
FUTK7001
- Futaba 7C 2.4GHz Transmitter
- R617FS FASST 7-Ch Receiver (FUTL7627)
- NR-4RB 1000mAh 4.8V NiCd Receiver Battery (FUTM1380)
- FBC-19B(4) 120V Battery Charger (FUTM1830)
- Four S3152 Digital High Torque Servos (FUTM0311)
- NT8S600B 600mAh 9.6V NiCd Transmitter Battery (FUTM1457)
- Switch Harness w/Charge Cord (FUTM4370)
- Black Transmitter Neck Strap (FUTM5690)
- Servo mounting hardware and instruction manual
FUTK7003
- Futaba 7C 2.4GHz Transmitter
- R617FS FASST 7-Ch Receiver (FUTL7627)
- NR-4RB 1000mAh 4.8V NiCd Receiver Battery (FUTM1380)
- FBC-19B(4) 120V Battery Charger (FUTM1830)
- Four S3001 Standard Ball Bearing Servos (FUTM0029)
- NT8S600B 600mAh 9.6V NiCd Transmitter Battery (FUTM1457)
- Switch Harness w/Charge Cord (FUTM4370)
- Black Transmitter Neck Strap (FUTM5690)
- Servo mounting hardware and instruction manual
FUTK7005
- Futaba 7C 2.4GHz Transmitter
- R617FS FASST 7-Ch Receiver (FUTL7627)
- FBC-19B(4) 120V Battery Charger (FUTM1830)
- NT8S600B 600mAh 9.6V NiCd Transmitter Battery (FUTM1457)
- Switch Harness w/Charge Cord (FUTM4370)
- Black Transmitter Neck Strap (FUTM5690)
- Servo mounting hardware and instruction manual
|
|
|
|
|
|
|
|
|
 |
 |
|
Futaba 8FGH 8-Channel 2.4GHz FASST Heli R6008HS Mode 2
|
|
|
 |
 |
|
Very sexy radio! Features are nice too.. :)
|
|
 |
 |
|
The Futaba 8 channel fast offers features the competition doesn't, including some that have previously been found only on very high-end systems...and one that isn't available anywhere else. It could easily be the best 2.4GHz value on the market today, as well as the only radio you'll ever need. Features:
- A superb value for upper-level sport pilots as well as pilots breaking into competitive venues.
- It's the first Futaba system with SensorTouch™ programming, a feature that puts the power to move through menus and complete setup in record time at your fingertips.
- Includes a huge number of factory-defined mixes that help you program like a pro – and enjoy the best of the 8FG's potential.
- Accepts 32MB to 2GB SD memory cards* – you can add as much...or as little...memory as you want.
- Low latency and cutting-edge 2048 resolution combine for exceptionally fast, accurate Real-Time Response™.
- Offers FASST trademark dependability with a single R6008FS receiver. No satellite or specialty receivers required.
|
|
|
|
|
|
|
Heli Features
- 6 swash plate types
- 5 programmable mixes, plus:
- 4 swash mixes (aileron/elevator, elevator/aileron, pitch/aileron and pitch/elevator)
- 3 throttle mixes (to aileron, elevator and rudder)
- 5-point fuel and pitch/rudder mixing
- 5 conditions w/delay per channel
- 5-point throttle and pitch curves
- Throttle hold
- Hovering throttle and pitch
- High/low pitch rates
- Gyro functions
- Governor functions
Overview:
- 8 proportional channels
- 2 switched channels
- Integrated FASST 2.4GHz design
- 2048 resolution
- SensorTouch™ programming
- Airplane, heli and glider software
- 20-model internal
- Mode 1-4 selectable
- Direct access to timers, channel mode and model selection
- 2-touch access to system, linkage and model menus
- Compatible with 32MB to 2GB SD Memory Cards*
- Assignable switches/functions
- 10-character user and model naming
- Model select, copy and reset
- Data transfer
- All-channel and battery fail-safes
- Sub-trims, servo reversing, dual rates, expo and EPA with limits
- Digital trims and memory, with step and % options
- 128 x 64 backlit LCD w/auto-off timer, normal/large timer display options, adjustable contrast and brightness
- Servo cycle w/bar graph displays
- Model and system timers
- Trainer system w/channel/function options
- Sticks w/ball-bearing gimbals, length and tension adjustments
|
|
|
|
|
|
|
|
|
 |
 |
|
Futaba 10CHG 2.4GHz Integrated R6014HS Heli
|
|
Includes:
- Futaba 10C Transmitter
- NT8S700B 9.6V 700mAh NiCd Transmitter Battery (FUTM1460)
- NR-4RB 1000mAh NiCd Receiver Battery (FUTM1380)
- FBC-19B RX/TX Wall Charger (FUTM1830)
- R6014HS Receiver (FUTL7645)
- 8 (203mm) Servo Extension
- Switch Harness
- Neck Strap (FUTM5690)
Heli Features
- 6 programmable mixes
- Hover/pitch
- Hover throttle
- 8 swash plate types w/graphics
- Swash AFR
- 5-point revo mixing
- Gyro menu
- 7-point throttle and pitch curves w/delay
- High/low pitch setting
- Swash ring
- Throttle hold and 3 idle-ups w/delay
|
|
|
|
|
|
|
|
|
 |
 |
|
12FGH FASST 2.4GHZ Tx/ R6014FS Rx Heli Mode 2
|
|
|
 |
 |
|
Taking twelve-channel control to the next level!
|
|
 |
|
This is the Futaba 12FGH Transmitter and R6014FS 14-ch Receiver with the 2.4GHz FASST system. When you improve upon all of the best that Futaba 2048 technology has to offer,you have the 12FG-one serious system for discerning R/C pilots. From the state-of-the-art receiver to the capacity to store memory for a whopping 1,882 models, the 12FG has the features and functions to position itself far above the competition. And because it's from Futaba, you can fly with confidence, knowing that the industry's finest research and development is behind you. Contains software for airplanes, helicopters and gliders. This is the helicopter version which will default to helicopter settings, with mode 2 stick operation and does not have a ratcheted throttle. |
|
|
|
|
|
|
|
|
|
- Features:
- Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts every two milliseconds virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies
- Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antennas built into the receiver ensuring that the aircraft stays under constant control of transmitter regardless of altitude
- Pre-Vision Packet Screening technology scans incoming data for potential problems and applies sophisticated error correction techniques for solid impenetrable link with model
- Easy Link system features a unique ID code in the transmitter that links to the receiver insuring that receiver only follows commands from this transmitter-with over 134 million possible codes there is no chance for a conflict
- No hassle Fail Safe programmed through transmitter-no complicated set-up steps or binding plugs
- When performing a ground check, the Power Down function allows modeler to reduce power from up to 50+ paces away-like retracting the antenna on a conventional transmitter
- Purpose built custom IC chips for key functions. no off-the-shelf IC chips
- Digital trims on all 4 main channels
- Ergonomic rubber grips
- Quad-bearing gimbals
- Ultra-precise tuning in .5% increments
- 255X196 LCD scren with adjustable contrast
- One year limited warranty
- Programming Features:
- Thirty model memory
- Programming for airplane, glider and helicopter models
- Supports 13 wing types, 3 tail types and 8 heli swash tupes
- Eight flight conditions
- Variable dual rates
- Servo grouping for servo synchronization
- Newly designed joystick button and Dial-N-Key editing for easier menu navigating
- Stick Mode-Choose from Mode 1-Mode-4
- Twenty-seven pre-programmed mixes, with built-in shortcuts
- Three swashplate types
- Five-Point Normal and Idle Up Throttle/Pitch Curves
- Revo, Gyro and Swash to Throttle mixing
- Swash AFR Adjustable Function Rate for use w/ 3S or 3E swash types
- Includes:
- Futaba 12FGH Transmitter
- 7.2V 1700mAh NiMH Transmitter Battery
- 1500mAh NiCd Receiver Battery
- R6014FS Receiver, FUTL7644
- Heavy-Duty Switch Harness
- Futaba Orange Transmitter Neck Strap
- Receiver Power Requirement: 4.8 to 6V
|
|
|
|
|
|
|
|
|
|
|
 |
 |
|
Futaba 12AHP Heli 12-Channel 2048 2.4GHz Computer System Mode 2
|
|
|
|
|
|
|
 |
 |
|
14MZ 2.4G Hz R6014FS Heli Mode 2
|
|
|
 |
 |
|
One of the world's best transmitters!
|
|
 |
|
Enjoy the unrivaled power and dependability of the world’s only 14-channel R/C system!
Now with the unmatched dependability of FASST.
It’s the flight system pilots have been waiting for: the perfect marriage of the incredible programming power and flexibility of the 14MZ to Futaba Advanced Spread Spectrum Technology (FASST) — the most dependable signal transmission technology ever created.
Long before it was ever considered for hobby use, Futaba engineers had already begun using and refining 2.4GHz technology for industrial R/C use. By the time we discovered the hobby potential of 2.4GHz technology, we had over 15 years of experience in 2.4GHz design and manufacturing — a unique advantage that pays off in the premium performance of Futaba FASST systems. |
|
|
|
|
|
|
|
|
|
14MZ System Overview:
- DUAL internal processors for flawless reliability.
- PCM G3 2048 resolution for unprecedented speed and precision.
- Full color, touch screen display with Dial-N-Key button. Navigate through menus and make selections by touching the screen or using the Dial-N-Key button.
- 2200mAh Lithium-Ion transmitter battery
- Switch Customizing. Reconfigure the eight 14MZ shoulder switches to your own preference. Just pull out a switch to remove it, and plug in the style you prefer — tall or short, button or toggle, spring-loaded or positionable.
- Stick Customizing-A tension adjustment lets you tailor stick feel to your own touch. Dual ball bearings on each axis and a long-life potentiometer ensure smooth, precise control.
- Audio and Picture files-Using a Compact Flash memory card, modelers can upload JPEG picture images of their models that will appear on the LCD screen. Use the built-in mic to record and store up to 24 voice prompts -- like Landing gear down! and Full throttle! Assign them to specific switches and functions. Then, through the built-in speaker or included earphones, you’ll hear audio confirmations of proper stick movement.
- Compact Flash Card Data Storage and Transfer Increase memory to 100 models. Upload digital images of your aircraft for use as model names on the graphic display menu. Create and store audio files.
- Silky smooth sticks- Each axis is supported by dual ball bearings. Stick tension and detent is adjustable, so airplane and heli modelers can personalize to their preference.
- Preset Model Types Numerous aircraft configurations are already programmed into the 14MZ -- seven wing types and three tail types. That’s a good example of the many built-in shortcuts that make this radio so easy to use. Just select the set-up you need!
- Servo Grouping With the 14MZ, you can group multiple servos that control a single function onto one transmitter operation -- but plug the servos themselves into different individually adjustable receiver channels (even non-consecutively) without needing a separate servo synchronizer for mixing.
You get all this with the 14MZ:
- 14MZ transmitter including (TM-14) RF module
- R6014 2.4 GHz FASST Receiver
- 32 MB Compact Flash data pack memory card
- 7.4V Lithium Ion transmitter battery
- Lithium Ion transmitter battery charger
- Wall charger for receiver battery
- 1500mAh NiCd 4.8V receiver battery
- Aluminum case with fully padded interior
- Switch harness
- Aileron extension cord
- Y-harness
- DSC (Direct Servo Control) cord
- Woven adjustable neck strap
- Rubber tipped stylus pen for touch panel, dress nut wrench, 2.5mm and 1.5mm hex wrench
- Instruction manual
SD CardIncluded Compact Flash Card
- Expands memory by 100 models
- Stores downloaded digital images
- Records/stores downloaded Windows Media Audio (.wma) files, recorded sound files and up to 24, 3-second voice prompts for play back
- Stores free 14MZ upgrades and updates downloaded from 14MZ web site
14MZ ModuleTM-14 Module
- Futaba put an incredible amount of thought into how well one component fits — and works — with the next. Futaba 2.4GHz modules are no different from any other Futaba transmitter module: they simply plug into place, for fast, solid connections. No extra cords or clutter — just a perfect fit and unparalled performance first-time, every time.
R6014FS ReceiverR6014FS Receiver
- 14 channels
- Dual antennas
- Battery fail-safe with auto cut-off
- Designed for Continuous Channel Shifting™ technology
- “Locks” to transmitter’s unique signal with push-button Easy Link™
Customizable Switch Banks (right and left)
- Change location of existing switches, or plug in the style you prefer: long or short, button or toggle, spring-loaded or positionable.
Full-Color HVGA Display
- Cut programming time in half with state-of-the-art touch-screen set-up or use the rotary dial and direct select buttons at the bottom of the screen.
- Start-up screen leads to three function-specific menus:
- System — for transmitter functions
- Linkage — for model functions that remain constant.
- Model — for functions that modify performance based on conditions
- Identify aircraft with digital images alone — or add model names up to 32 characters long.
- Clear, sharp 640 x 240 pixel resolution.
- Displays battery capacity, trim positions, and other critical flight data for fast, at-a-glance reference.
- Anti-glare filter and adjustable screen contrast maximize visibility in any light
Quad-Bearing GimbalsQuad-Bearing Gimbals
- with dual bearings on each axis. length, tension and detent adjustments. and long-life potentiometer
Factory-Defined Mixes
- Short-cuts designed to help you save time. The mixes are there – just add settings!
- 24 in all: seven wing mixes, six flying wing mixes, four tail mixes and eight heli swash mixes.
Adjustment Ease
- For finer tuning: ultra-precise 0.5% increments vs. 1% increments in other radios.
- For greater speed: make changes in 5% increments with the “Fast Forward” option.
Variable Dual Rates6 Variable Dual Rates™ (VDR)
- Factory-set rates can be assigned to any function in any flight condition.
- Variable Dual Rates and Expo can be combined and activated automatically when a function is activated. No program mixing required.
Servo GroupingServo Grouping™
- Allows all servos dedicated to a single function to be operated simultaneously and controlled like a single servo.
- Servos can be plugged into different (even non-consecutive) receiver channels.
- No servo synchronizer required — each servo’s EPA can be adjusted individually from the transmitter.
|
|
|
|
|
|
|
|
|
|
|
 |
 |
|
Eflite HP6DSM 6-Channel Transmitter 2.4GHz DSM2: BCPP2
|
|
|
|
|
|
|
 |
 |
|
DX6i 6-Channel, 4 x DSP 7.5-gram servos, 1 x AR6100E Microlite MD2
|
|
|
 |
 |
|
Includes 4 servos and receiver!
|
|
 |
|
The 6-channel DX6i Microlite uses the same full range DSM2™ technology found in the Spektrum DX7 and includes an impressive list of programming features for both airplanes and helicopters that are simple to access and use. It comes with the AR6100e DSM2 Microlite 6-channel receiver, which weighs only 4.4 grams and is the ultimate 2.4GHz receiver for foamies and up to 400 class helis. Also included with the DX6i Microlite are four Spektrum DSP75 servos which offer superior speed, torque and precision for parkflyers and micro helis.
|
|
|
|
|
|
|
Specs
- # of Channels:6
- Modulation:DSM2
- Band:2.4GHz
- Servos:4 SPMDSP75 7.5-Gram Super Sub-Micro Digital Programmable
- Receiver:AR6100E Microlite Park Flyer 6CH Aircraft receiver
- Programming Features:Helicopter and Airplane
- Model Memory:10
- Modes:Mode 1 and Mode 2 available
- Transmitter (Tx) Battery Type:AA NiMH 1500mAh batteries (included)
- Charger:100-240V AC wall charger 150mA output (included)
- Experience Level:Intermediate
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<<    <    1    2    3    4    >    >>
Page 2 of 4
|
|
|
 |
 |
 |
|
Call us: 1-818-996-6551
|
 |
|
HeliHobby.com Inc 2001 - 2009 Copyrights © 7751 Alabama Ave Ste. 11 Canoga Park, CA 91304 (818) 996 6551
|
|
 |
 |
|
Authorized HeliHobby Distributor eHobbyHouse Store front 17721 Vanowen st Reseda, CA 91335 (818) 609 1968
|
|
|
|
 |
 |
|
HeliHobby.com is your source for Remote Control RC Helicopters, products, modifications and more. Full Range of Nitro, Electric and Micro Helis in stock
|
|
|
|
|
|