HeliHobby.com is your source for Remote Control RC Helicopters, products, modifications and more. Full Range of Nitro, Electric and Micro Helis in stock.
The BMS-375 digital series are designed to handle the most demanding applications with precision. The servo will automatically learn the user's transmitter pulse timings and lock into the signal every time. The servo also includes a signal buffer in the CPU with fail-safe functionality. The motor is wound with 2PEW thin coated wire for better electrical conductivity and is able to withstand over 120 deg C without degradation. The servo comes with an accessory package and the universal JR/Hitec S Connector which is physically and electrically compatible with all major receiver brands sold worldwide.
- Features:
- Carbon+30% POM gears with smooth curvature
- M9.6 ball bearing (si-oil)
- High-torque motor with low RF noise (CE certified)
- Rubber seals for waterproof case
- Designed for 3D airplane and helicopter, 1/18 car, and glider applications.
- Futaba compatible 25 tooth output splines
- Digital motor drive with ultra-square PWM signal
- Automatic determination of servo center pulse width
- Fail-Safe function
- 2PEW coated motor wire for high-temperature use
- Digital control IC - SOP package with 12bit data transfer
- MOS-FET motor driver chips that can handle 7A peak loads
- Useable on 6.0V
- Specs:
- Weight: 9.6 Grams / 0.38 oz (with wire)
- Size: 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 in.
- Torque At 4.8V: 22 oz.in.
- Speed At 4.8V: 0.11 sec / 60 deg
Digital Metal Gear Micro Servo from Blue Bird
Digital Precision
The BMS-375 digital series are designed to handle the most demanding applications. The servo will automatically learn the user's transmitter pulse timings and lock into the signal every time. The servo also includes a signal buffer in the CPU with fail-safe functionality. The motor is wound with 2PEW thin coated wire for better electrical conductivity and is able to withstand over 120 deg C without degradation.
- Features:
- M9.6 ball bearing (si-oil)
- High-torque motor with low RF noise (CE certified)
- Rubber seals for waterproof case
- Designed for 3D airplane and helicopter, 1/18 car, and glider applications.
- Futaba compatible 25 tooth output splines
- Digital motor drive with ultra-square PWM signal
- Automatic determination of servo center pulse width
- Metal gears of aluminum 6061 material combined with light and strong C95 material
- Fail-Safe function
- 2PEW coated motor wire for high-temperature use
- Digital control IC - SOP package with 12bit data transfer
- MOS-FET motor driver chips that can handle 7A peak loads
- Useable on 6.0V
- Specs:
- Weight: 11.4 Grams / 0.44 oz (with wire)
- Size: 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 in.
- Torque At 4.8V: 22 oz.in.
- Speed At 4.8V: 0.13 sec / 60 deg
- Torque At 6.0V: 28 oz.in.
- Speed At 6.0V: 0.11 sec / 60 deg
- Ball Bearing: Yes
- Metal Gears: Yes
Digital Micro Servo For Helicopter Tail Control
Precision Digital control
The BMS-376DD is designed exclusively for helicopter tail rotor control. The servo will automatically learn the user's transmitter pulse timings and lock into the signal every time. The servo also includes a signal buffer in the CPU with fail-safe functionality. The motor is wound with 2PEW thin coated wire for better electrical conductivity and is able to withstand over 120 deg C without degradation.
- Features:
- Carbon+30% POM gears with smooth curvature
- M9.6 ball bearing (si-oil)
- High-torque motor with low RF noise (CE certified)
- Rubber seals for waterproof case
- Designed for helicopter tail rotor control
- Futaba compatible 25 tooth output splines
- Digital motor drive with ultra-square PWM signal
- Automatic determination of servo center pulse width
- Fail-Safe function
- 2PEW coated motor wire for high-temperature use
- Digital control IC - SOP package with 12bit data transfer
- MOS-FET motor driver chips that can handle 7A peak loads
- Useable on 6.0V
S3004 Servo Standard BB Bulk
By Futaba
This is the Futaba S3004 Light Weight, Ball Bearing Servo. This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps. FEATURES: Single ball bearing on output shaft. Precise tight fit throughout the geartrain. Being standard size and lightweight, it fits many applications.
- SPECS:
- Speed: 0.23 sec/60 deg @ 4.8V, 0.19 sec/60 deg @ 6.0V
- Torque: 44.3 oz-in (3.2 kg-cm) at 4.8V, 56.8 oz-in (4.1 kg-cm) at 6.0V
- Length: 1.59 inch (40.4mm)
- Width: 0.78 inch (19.8mm)
- Height: 1.42 inch (36mm)
- Weight: 1.30 ounce (38 grams)
- Connector: J type with approx. 5 inch wire
- REQUIRES: Does not include any hardware (use FUTM3551 for the hardware)
Futaba S3003 Servo Bulk
By Futaba
This is the FUTABA S3003 STANDARD entry level Servo w/o Accessories. This servo can produce high current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps. Lightweight servo for use where a basic servo is needed.
