This is the 72MHz Futaba R168DF 8-Channel FM Receiver without Crystal. FEATURES: Strong interference free reception for all 4+ channel Futaba FM systems. Narrow band spacing and dual conversion signal filtering. Accepts high or low band crystals. One year limited warranty

This is the Futaba R168DP 8-Channel 72MHz (channel 11-60) PCM 1024 Dual Conversion Receiver without Crystal. FEATURES: Narrow-band spacing and Dual Conversion signal filtering combine to provide exceptionally clear, interference-free reception and amazingly smooth, accurate control.

The Berg 7P provides the solid precise control and superior noise rejection every modeler demands. The same proven microprocessor driven True Digital Signal Processing (TDSP) and Transmitter Signal Recognition (TSR) functions that have made the Castle Creations Berg 4 the industry standard in full range micro receiver performance ensure flight after flight of glitch-free operation. Connect the Berg 7p to your Castle Link for unprecedented control of its numerous programmable functions! Easy channel mapping and adjustable servo response rate are the initial basic features. Real time slider control on screen to set your fail safe servo positions and view your transmitter signal outputs as you move your radio control sticks. The Berg 7p has seven output channel ports, but you can replace any of them with channels 8 and 9 using the Castle Link. IMPORTANT: Please note that you need to order the none standard berg crystals. We do not have these on the site and we can do a special order for you if you give us a call.

M5 computer controlled sub micro receiver. Sophisticated microcontroller and advanced dual conversion circuitry into a package 22% smaller than the Extreme 5. Simply put this receiver contains a small microchip in the decoder circuitry that analyzes each frame of data ignores noise spikes and if noise level from any source ever gets to the point where it cannot be ignored the receiver will failsafe. The M5 failsafe is improved over the Extreme series as well. This improvement enables the M5 keep track of valid frames of data. The SMART decoder does not degrade receiver performance measurably from a standard PPM decoder insofar as servo speed and granularity (Stepping) is concerned. The net result is that the M5 receiver can fly through even deliberate interference and not reflect that in the flight path.

Hitec does it again with the Supreme IIS 8Ch FM Autoshift DC Receiver. This 8 Channel Receiver has superb range and was designed to be used in aircraft that simply can not afford any glitches.

This is the Futaba R5114DPS Synthesized 72MHz 14-Channel Receiver for use with the 14MZ, 12FG, 12MZ and the FX-40 Radio Systems. FEATURES: Ball Grid Array (BGA) layered PC board technology allows for a very small size. WFSS (Wireless Frequency Setting System) allows frequency changes to be made from the transmitter. Synthesized receiver allows switching to any channel in 72MHz band PCM G3 2048 resolution, dual conversion. One year limited warranty.

The Futaba R309DPS is a 9 channel PCM receiver. Narrow-band spacing and dual conversion signal filtering combined to provide exceptionally clear interference - free reception and amazingly smooth accurate control. Designed also with an internal synthesized module so you can pick your own favorite channel.

This is the Hitec Supreme II Universal Flight Pack with Supreme IIS Receiver, four HS-425BB Servos, 600mAh NiCd Battery and Switch Harness. Designed for modelers who want to use a single radio transmitter to fly several different model aircraft. Especially pilots utilizing computerized radios with multi-model memory. FEATURES: 8-channel autoshift receiver is compatible with all modern FM transmitters. Dual ball bearing standard size servos with universal connectors, extra servo horns and mounting hardware, 600mAh 4.8V flat receiver NiCd battery.

Hitec has the most affordable 9 channel synthesized receiver on the market. The Auto-Shift, Dual Conversion, Fusion 9 with IPD technology uses no crystals and can be tuned to any 72 MHz channel with any FM Transmitter. Intelligent Pulse Decoding (IPD) technology allows for the programming of an optional Fail Safe. The Fusion 9 also features a slim and compact case with highly desired End Block connectors. Works with Hitecs Spectra Module for Crystal-Free R/C as well as all other FM TXs.

This is the Futaba Multi-Proportional System Decoder for use with the 14MZ and FX-40 Radio Sytems. FEATURES: Perfect for adding more functions to large-scale planes, jets and helis. Plugs into one channel of any Futaba FM, PCM G3 or PCM 1024 receiver and provides an additional seven channels All added channels are fully proportional, switch selectable and feature endpoint adjustment (ATV) and failsafe. Easy to set up. preset for PCM 2048 resolution. Servo operation of 8 channels is possible with 1 channel. Linear operation. Servo operation speed of each channel can be set. Fail-Safe for each channel can be set. 14MZ/FX-40 can accommodate up to 2 multi-proportional decoders. Channel expansion up to 28 channels is possible with the R5014DPS receiver. Operating control setting, direction of operation change, and travel possible for each multi-prop expanded channel.

The 72Mhz is a very economical dual shift receiver which holds a unique size ( between micro to full size RX ) and which is an ideal choice mid size Helis such as the Logos ECO-8s and Eolos. Available in JR and Futaba Shift.

For the highest performance in the smallest package Hitec Introduces the Neutron 6S Six Channel 72 MHz FM Receiver. Dual Conversion and Auto Gain Control for the ultimate in Glitch Protection combined with Auto Shift Technology so any modern brand of 72MHz FM TX will fly the Neutron 6S with confidence. Measuring 1.6 x .9 x .6 @ 15.5 grams the End Block style Rx features a base loaded antenna only 24.5 inches long!

Flight Packs include either the HS-55 or HS-81 micro/mini servos (x 3).

This is the Hitec 7 Channel PCM Eclipse Seven Receiver. FEATURES: Quick response PCM. Shock absorber technology. Low voltage operation down to 3.0V. Gold plated pins. Dual battery slot. Power indicator. Direct servo control slot (DSC). Note: This receiver only works with Hitec QPCM transmitters.

Built on the same chassis as the popular R770 receiver, youre sure to love the same JR reliability along with the convenience of ScanSelect tehcnology. Change frequencies at the push of a button and receive ABCW interference Protection System. Available in both PCM digital modulation and FM modulation this Small, light RX will fit in a wide variety of Helicopter models. Highly sensitive for great range and Glitch-free PCM or FM performance. ScanSelect automatically tunes to your transmitter's frequency on the fly with a push of a button.

This 6 Channel receiver is perfect for Collective Pitch flight. Very resistant to interference and works well with other electronics in close distance.

Synthesized Module for a 9Z Transmitter.

Install your receiver inside this secure Velcro padding and insure proper operation even under the most extreme vibration conditions or a crash. The padding is extra soft and rubbery so your gear is always secure reducing the chance for damage and dramatically reducing glitches and interference. Available in both a thick wrap with Velcro ( Black ) or in a bag form which the receiver is inserted into. Some like wraps as they are thicker while others prefer the convenience of a receiver bag / case.

The Channel expander will allow you to add an additional 4 channels to your receiver. Now you can add additional components like a GY401 with remote gain control retracts and even remote light switches all thanks to the Berg 9 channel eXpander.

The Shadows 3 which is a 7 channel receiver is the first crystaless synthesized micro receiver. That’s right the kit comes with a detachable module which is connected using 6 pins onto the receiver whenever you wish to set a new channel. Thus no crystal is ever needed. This receiver also uses DSP filtering so its quality of reception is superior to most other Micro receivers. The Shadow 3 is the world’s smallest lightest ( comes pre lightened ) full range Crystal less fully synthesized receiver which operates of a 72MHz. With its 1-click programming and patented fail safe technology the shadows is the ultimate Micro receiver. Fully programmable and excellent IP3 sensitivity the Shadows 3 is the most advanced DSP RX. You can expect pure signal detection with the clear glitch suppression and 100% reliability. And if that wasn’t enough the Shadows 3 also has auto shift detection so it works with all shifts ( Negative and Positive ). - Please note that compatibility issues exist with Futaba GY240 and GY401 Gyros.

If you do not have the Serial port at your computer this device helps you to plug in the PC Adapter. PC Adapter allows you to change factory set up of HeliCommand through your PC. This is a very useful tool for those of us whom do not have serial ports available on our PC.

The Futaba R149DP is a 9 channel PCM receiver. Narrow-band spacing and dual conversion signal filtering combined to provide exceptionally clear interference - free reception and amazingly smooth accurate control. Designed for modelers who want to use a single radio transmitter to fly several different model aircraft especially pilots who are utilizing computerized radios.

The HFS-05MS uses an auto-sensing (positive and negative shift) technology which allows the use of any current FM transmitter. This sub-micro receiver was designed for applications where size and weight is limited but full range is needed which makes it perfect for Micro Helicopters.