servos

Current View

Products > Electronic Accessories > RC Helicopter Servos

<< < 1 2 3 4 5 6 > >>

Page 6 of 6


	S9250 Servo Digital Heli Servo


	All .30 .60 .90 Helis

S9250 is an all purpose Heli servo and work very well and precision control. Equipped with metal gears. Can be used for both tail as well as cyclic collective and throttle.

	109.99

PART#FUTM0220

- Control System: +Pulse Width Control 1520usec Neutral
- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8 Volts Only
- Operating Temperature Range:
-20 to +60 Degree C
- Operating Speed (4.8V): 0.11sec/60 degrees at no load
- Stall Torque (4.8V): 76 oz/in. (3.8kg.cm)
- Operating Angle: 45 Deg. one side pulse traveling 400usec
- 360 Modifiable: Yes
- Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
- Motor Type: Coreless Motor
- Potentiometer Drive: Indirect Drive
- Bearing Type: Dual Ball Bearings
- Gear Type: All Metal Gears
- Connector Wire Length: 12 inch
- Dimensions: 1.6 x 0.8x 1.5 inch (41 x 20 x 38mm)
- Weight: 1.9oz. (54g)


	Futaba S9256 Servo Digital Hi Speed/Torque

This is the S9256 Digital Servo used with the Futaba GY611 Gyro, FUTM0825. FEATURES: Aluminum case with heat sink to help cool motor Special servo for the GY611. Compatible with Super Narrow Pulse of (760µs) drive. Nylon gears One year warranty. INCLUDES: Four rubber grommets to isolate vibration. Four brass eyelets. Four phillips head self-tapping mounting screws. One large servo wheel 35mm in diameter. One star shaped (six arms) servo arm 32mm accross. One X-shaped servo arm 39mm across. One year limited warranty.

	119.99

PART#FUTM0226

- Requires: Radio system using Futaba J type connectors

- Specifications:
- Dimensions: 1.57 x .79 x 1.44 inches (40 x 20 x 36.5mm)
- Weight: 2.01oz (57g)
- Speed: .06 sec/60 deg @ 4.8V
- Torque: 47 oz-in (3.4 kg-cm) at 4.8V


	Grand Wing Servo GWS MICRO


	Available in Futaba/Hitec and JR/Airtronics connector

This inexpensive servo is best to be used for cyclic control for anyone looking for a low cost reliable servo. The servo comes complete with mounting hardware and matching plastic horns. Available with both Futaba/Hitec connectors as well as JR/Airtronics connector.



select checkbox below:

Grand Wing Servo GWS MICRO (Futaba connector) 11.38 Grand Wing Servo GWS MICRO (JR connector) 11.38

- Made: Grand Wing Servo
- Torque: 22 oz/in at 6V
- Speed: 0.12 sec/60 deg at 6V
- Dimensions: 22.2 x 11.0 x 24.95 in
- Weight: 10.00g


	Hitec Mini 6S Flight Packs


	Choose the right package for you and save

Need a flight pack for your latest project? Hitec flight packs are a fantastic value. These packs are built around the Mini 6S single-conversion receiver with auto-shift. Choose from several configurations below.



select checkbox below:

Mini Micro PK Mini 6S 3-HS55 79.99 Mini PK Mini 6S 3-HS81 84.99 Economy Flight Pack Mini with 6S 4-HS322 57215sw 92.99 Electric Heli Pack Pro - Mini 6S RX/4 HS-65 119.99

- Micro Pack: Mini 6S Rx, HS-55 x 3 micro servos
- Mini Pack: Mini 6S Rx HS-81 x 3 mini servos
- Mini 6S Rx HS-322HD x 4 heavy duty servos and switch harness
- Electric Heli Pack Pro: Mini 6S RX 4 x HS-65


	HXT900 9g / 1.6kg / .12sec Micro Servo


	Perfect for 400 class helis!