Skylark Upgrades

HeliHobby.com is your
source for Remote Control
RC Helicopters, products,
modifications and more.
Full Range of Nitro, Electric
and Micro Helis in stock.

N a v i g a t o r


	Products > Skylark / Humble Bee / XR-1 > Upgrades


	Fixed Pitch Turbine Swashplate


	For Micro Helis


	The ultimate CNC aluminum Swashplate will allow you to remove and eliminate any play on your cyclic control. The Steel Anti Rotation Pin will not break off after a crash. The center swashball is larger and will freely rotate allowing for a smooth flying Heli. All ball ends are precesily allined and the arms will not bend or break like the stock plastic.


	Enlarge

		Enlarge


	Includes precision high quality ball bearing Unique looking Turbine like swash arms perfectly aligned Large swash ball for a smooth running slider Ball ends will not break or bend like the stock swashplate Slider includes a slot opening to further reduce weight Clear / Chrome Natrual metal color


	Note: on the Humble Bee the roll servo needs to be moved to the other side and channel reversed on the transmitters ( flip switch ) for this setup to work properly.

	59.00
		PART#IP5866


	MADE IN THE USA - HIGH QUALITY PRODUCT - SATISFACTION GUARANTEED OR YOUR MONEY BACK


	Aluminum CNC Shaft collar with 3 set screws @ 120 degrees


	For All Micro Heli

This is probably the first modification you want to get for you Micro Heli. Having the main shaft slide down will result in breakage of the main gear. Also, this collar is extremely narrow and will allow for increased tilt of the Swashplate. The collar includes a flange ( lip ) that is placed over the frame’s bearing to reduce friction. The threaded set screw opening is of high quality and will allow for a fairy tight installation of the set screw without damaging the thread. We highly recommend it.


	Enlarge

	5.99
		PART#IP6028


	- Three set screw design for increased grab. - 120 Spacing of set screws will not thorough off balance at high RPM - High precision CNC machined aluminum - 3.00mm bore with -0.01mm tolerance for maximum tightness. - 0.2mm step-up design to ensure non-friction contact to bearing - Lowest profile design to give the swashplate more traveling pitch on CP and FP


	MADE IN THE USA - HIGH QUALITY PRODUCT - SATISFACTION GUARANTEED OR YOUR MONEY BACK


	Lightweight Aluminum Anti Rotation Support with Set screws


	For the Fixed Pitch Micro Helicopter


	Never break the ARS again. Replace the stock ARS on your fixed pitch Heli with this CNC Anti Rotation Support. Included are micro set screws and Allen key so you will not have to glue it in place. Simply cut the stock plastic ARS, send down the upper chassis and slide down the new CNC ARS, lock in place with the supplied set screws.


	Enlarge


	- Designed for the Piccolo FP, Mini Dragon Fly FP, skylark FP and Hummingbird FP. Humble Bee and others.

	12.00
		PART#IP5896


	MADE IN THE USA - HIGH QUALITY PRODUCT - SATISFACTION GUARANTEED OR YOUR MONEY BACK


	Multi purpose high precision threaded ball links ( Qty 4 )


	For all Micro Helis


	Use the balls as replacements for the CNC swashplate, making micro links, installing double links on servo horns and many other applications. The balls are CNC machined and are available in 3.0mm and 3.8mm. When used on servo horns use a nut to lock the threaded end.


	Enlarge Example

	Select items:
		PART#IP5954

For 3.0mm balls use plastic links PART#67365 / PART#67367
For 3.8mm balls use plastic links PART#E079


	MADE IN THE USA - HIGH QUALITY PRODUCT - SATISFACTION GUARANTEED OR YOUR MONEY BACK


	Custom machined main gears & flywheels - 100T / 100T


	For most Micro Helis ( Dual motor )


	The gear are available in four versions, 100T lightened, 110T lightened, 100T flywheel and 110 flywheel. The CNC machined gears are much stronger than the stock gear. Thicker face and incorporates an aluminum hub. These gears run super smooth. Click on the learn more to read more about these gears for your favorite Micro Heli.

	Select items:
		PART#IP5950-2

			Learn More


	Titanium Tail Shaft

	Eliminate vibrations that are sometimes caused due to splits and cracks in the original CF shaft. This titanium shaft is amazingly light and strong and doesn’t need to be sanded down to fit the bearings and gear.

	- 40mm long



	Enlarge

	8.00
		PART#IP5835

		Adjustable Links

	Easily adjust the linkage between your servos and the swashplate.




	Learn More

	9.50
		PART#HH142


	Boom Replacement Kit

		The kit includes three aluminum booms, mounting screws, nuts and spacers. The Aluminum boom looks great.

	10.00
		PART#HH144