The JR R921 receiver combines Spektrum's exclusive, patent- pending DSM2 protocol plus the brand's DuaLink feature-and the result has been revolutionary. The radio system simultaneously transmits on two frequencies, creating dual RF paths. This dual path redundancy, plus the fact that each of the two receivers is located in a slightly different location exposes each to a different RF environment and creates a superior path diversity RF link in all conditions.

Featuring DSM technology and weighing in at only 7 grams, the AR6000 receiver is specifically designed for electric powered planes and helis. Better yet, it will deliver reliable range exceeding that of any other receiver sold specifically for parkflyers. Designed to work with Spektrum's DX6 transmitter. Features: DuaLink TM(patent pending) incorporates two receivers in one. Ultralight 7 grams. Compact design 39 x 39 x 9mm. Smart fail-safe prevents motor start up if Tx is off and gives low throttle if signal is lost. Short 3.75 inch antennas for mounting convenience. Easy bind plug.

The AR7000 dual receiver that pairs with the DX7 Transmitter is key to the systems incredibly robust RF link. Information from two receivers is processed by a patent-pending Spektrum software that takes information from each receiver and combines it to form the most vivid picture of an RF signal than has ever been possible before.

At only 3.5 grams and 19mm x 30mm x 9mm (WxLxH), the AR6100 is the ultimate 2.4GHz receiver. Because it uses advanced DSM2 technology, it is only compatible with the new DX7 aircraft system. It also boasts a wide input range that allows it to operate with 3.5 to 9-volt electrical systems. Features: Super light weight at 3.5 grams. Glitch-free DSM2 Technology. 6 Channels. Compact design. Short antennas for mounting convenience. Only compatible with the DX7.

Antenna extension for the Spektrum AR7000 receiver. Connects main receiver to external receiver.

Remote receiver extension for the AR6200, AR7000, and AR9000 receivers.

This remote receiver can be used as a replacement for the AR6200, AR7000 and the AR9000 remote receivers. It can also be used as an optional fourth remote receiver for the AR9000. FEATURES: Includes 24 inch Remote Receiver Extension. Replacement Antenna for the AR6200, AR7000 and AR9000 Receivers. Optional Second Remote Receiver for the AR9000 Receiver. The remote receiver includes one 12 inch extension. however, various lengths of receiver extensions can be purchased allowing various placement options for mounting purposes. Additional remote receiver extensions are available in 6, 9, 12, 24, and 36 inch lengths.

At only 4.4 grams and 19.0mm x 30.0mm x 9.0mm (WxLxH), the AR6100E is the ultimate 2.4GHz receiver for most any small electric model from mini profile foamies to 400 class helis. Because it uses advanced DSM2 technology, it is only compatible with DSM2 aircraft radio and module systems. It also boasts a wide input range that allows it to operate with 3.5- to 9-volt electrical systems.

Spektrum’s 2.4GHz DSM2 technology gets even smaller with the AR6110 6-channel DSM2 Microlite Park Flyer Receiver. The AR6110 weighs less than 3.5 grams making it the lightest 6-channel conventional plug aircraft receiver on the market. Antenna locations give the AR6110 improved signal path diversity. The receiver also features a red LED (labeled with H) that indicates the number of holds that have occurred since the receiver was last powered on. The AR6110 is compatible with all aircraft DSM2 radios and module systems. It is designed for park flyer use only.

** The AR6110 receiver is not compatible with the DX6 park flyer radio system. **

Spektrum’s 2.4GHz DSM2 Technology gets even smaller with the AR6110e 6-channel DSM2 Microlite Park Flyer Receiver with End Pins, which is ideal for small compact airframes. The AR6110e weighs less than 4.3 grams, making it a light 6-channel aircraft receiver option. Antenna locations give the AR6110e improved signal path diversity. The receiver also features a red LED that indicates the number of holds that have occurred since the receiver was last powered on. The AR6110e is compatible with all aircraft DSM2 radios and module systems.

Key Features

* 6-channel park flyer receiver
* QuickConnect™ with Brownout Detection
* Red LED indicates number of holds
* End-pin configuration

The AR6200 DSM2 6-channel receiver is a great solution for all model aircraft requiring full range up to six channels. This DuaLink receiver simultaneously gathers information from two receivers that is processed by patent-pending Spektrum software that combines it to form the most vivid picture of an RF signal. This dual path redundancy, plus the fact each of the two receivers is located in a slightly different location exposes each to a different RF environment and creates a bulletproof RF link in all conditions.

When it comes to lightweight 3D micros, every ounce you can eliminate means better performance and longer flight times. Weighing in at a scant 2 grams, Spektrum's AR6300 is the perfect receiver for these types of applications. Not simply because it's so small, but because it gives you the superior response and interference protection of Spektrum's patented DSM2 technology. Its JST connecters are compatible with Spektrum's programmable DSP60J Digital Super Sub-Micro Servo (SPMDSP60J).

Spektrum is committed to offering receivers to modelers in all categories within the hobby, and the AR7600 is no exception to that commitment. The AR7600 is packed with industry-leading features including an incredibly fast input-to-output response with an 11-millisecond frame rate, 2048 resolution for ultra-smooth servo travel, and a compact footprint making it ideal for any application from extreme 3D to competition helicopter performance.

Due late August, back orders only by phone please.

The AR9000 combines two internal receivers and one remote receiver for path diversity and ultimate radio installation flexibility. The radio system simultaneously transmits on two frequencies creating dual RF paths. This dual path redundancy, plus the fact the remote receiver(s) are located in different locations exposes each receiver to a different view of the RF environment providing unmatched path diversity. A second remote receiver (SPM9545) can be added to the system to increase the receiver's view of the RF link. This option might work well in giant scale aerobatic planes or jets where installations become challenging. Remote receiver extensions are available in 6, 9, 12, 24, and 36 inch lengths to provide a variety of installation options. Spektrum's optional Flight Log (SPM9540) is compatible with the AR9000. The Flight Log displays the receiver's real time voltage. It also shows individual internal and remote receivers' RF link data, and overall system RF link performance. While the optional remote receiver and flight log are not necessary to operate the AR9000, some large or complex models may benefit from having these items included in the set up. Every model is unique, and Spektrum's receiver solutions allow you to customize the radio installation to match the unique demands of all your radio system installation needs.

The AR9100 is designed for models using multiple servos that draw excess current or multiple high-torque servos, such as giant-scale airplanes and jet models. It features a robust power bus designed to manage high-current loads, as well as dual 16AWG battery input leads with EC3 connectors for use with larger battery packs. This makes it possible to support high-current systems straight through the AR9100 without the need for a separate power system. As an added measure of safety, Spektrum designed the AR9100 with a soft switch. Servo current is routed around the switch so, should it fail for any reason, power to the system will not be interrupted. The AR9100 PowerSafe receiver is a full-range receiver system designed for models that draw excess current such as giant-scale airplanes and jet models. This unique receiver design contains a main unit which houses the power bus, and it includes 3 remote receivers which come with one of each: 9 inch, 12 inch and 24 inch remote receiver extensions. The dual path redundancy of Spektrum's DuaLink technology, plus the fact each of the receivers is mounted in a slightly different location, exposes each to a different view of the RF environment and creates a bulletproof RF link in all conditions. You can add an optional fourth remote receiver (SPM9545—sold separately) to further enhance the receiving capabilities of the system for more complex aircraft. In addition to Spektrum's exclusive SmartSafe technology, the AR9100 gives you the option of using standard user preset failsafe settings. It is also compatible with Spektrum's optional Flight Log.

Now thousands of Futaba and JR users can experience the freedom that only Spektrum's revolutionary 2.4GHz technology can provide with Spektrum's new Aircraft Module Systems. Each module system includes everything you need to equip your Futaba or JR module-based system with the interference free, glitch free precision of DSM2 - Spektrum's advanced spread spectrum protocol that can be used with any size and type of aircraft. Just think, now you can fly anytime you want without giving a second thought to frequency conflicts, RF interference or glitches AND use the same radio you're flying with now. Choose from Futaba, JR, or Futaba MZ Air Modules with either the 7 channel AR7000 or 9 channel AR9000.

Spektrum's Voltage Protector prevents a DSM receiver's voltage from dropping below the proper operating level in lower voltage scenarios such as when running out of battery power insuring that your receiver is the last to be effected from low power thus failing to receive a signal.

Employing Spektrum's patent-pending MultiLink DSM2 technology, the R1221 uses one internal and three external receivers for path diversity - assuring your receiver always sees a strong signal and is unaffected by multi-path issues. What's more, DSM2 air receivers employ DuaLink two-frequency technology, ensuring your aircraft always operates with an ultra-secure, robust Rf link. Dual battery ports are provided with the R1221 for power redundancy. The receiver will handle well over 35 amps of continous current, the limiting factor being the connectors. In the unlikely event your voltage should ever drop below 3.5 volts, control is established the instant voltage returns due to the QuickConnect instant voltage recovery system.

Employing the PowerSafe battery system, the R1222 incorporates redundant, dual-battery leads for use with battery systems up to 10 volts. In addition, technology like DualLink frequencies (two redundant frequencies) and MultiLink receivers (up to four receivers can be employed in different parts of the aircraft to eliminate path diversity and blocking issues) assure the user with comprehensive safety network on a variety of levels—all in one, neat small package.

The R1222 also employs the QuickConnect instant voltage recovery system. In the unlikely event your voltage should ever drop below 3.5 volts, control is restored as soon as voltage returns.

The R922 PowerSafe™ receiver is designed for models using multiple servos that draw excess current or multiple high-torque servos, such as giant-scale airplanes and jet models. It features a robust power bus designed to manage high-current loads, as well as dual 16AWG battery input leads with EC3 connectors for use with larger battery packs. This makes it possible to support high-current systems straight through the R922 without the need for a separate power system. As an added measure of safety, the R922 is designed with a soft switch. Servo current is routed around the switch so, should it fail for any reason, power to the system will not be interrupted.

This unique MultiLInk™ receiver design contains a main unit which houses the power bus, and it includes 3 remote receivers which come with one of each: 9”, 12” and 24” remote receiver extensions. The dual path redundancy of Spektrum’s DuaLink® technology, plus the fact each of the receivers is mounted in a slightly different location, exposes each to a different view of the RF environment and creates a bulletproof RF link in all conditions. Also, in the highly unlikely event both your batteries should ever drop below 3.5 volts, new Fast Reconnect circuitry in the R922 provides for control recovery the moment adequate voltage is restored. There is absolutely no delay. You can add an optional fourth remote receiver (JRPRR121—sold separately) to further enhance the receiving capabilities of the system for more complex aircraft. In addition to Spektrum’s exclusive SmartSafe™ technology, the R922 gives you the option of using standard user preset fail-safe settings.

The remote receiver can be used as a replacement for the R921, R922, R1221 and R1222 receivers. It can also be used as an optional fourth remote receiver for the R922. The remote receiver includes one 24 inch extension. however, various lengths of receiver extensions can be purchased allowing various placement options for mountin purposes. Additional remote receiver extensiona are available in 6, 9, 12, 24 and 36 inch lengths.