These are high quality inexpensive carbon tail rotor blades. Available in both 92mm, 95mm and 103mm with a 3mm bolt mount opening. Carbon Fiber blades are proven to increase tail responsiveness and reduce the load of the tail rotor under extreme rudder control.

RotorTech Carbon Fiber tail blades for 30 to any size machine. The RotorTech blades are one of the best tail blades in the world and they will not shutter or crack like other inexpensive blades. The RotorTech are stiff and have a beautiful glossy finish to them.

Radix Tail blades are light, rigid and center of gravity (CG) balanced / corrected. Each length of the tail blades will give you optimum pirouette, holding and stopping power. If its good enough for Curtis Youngblood, its probably good enough for you.

These very luminate blades are perfect for your .90 size helicopter such as Trex 700, Raptor .90 and etc. They come with a hand little jumper pin to luminate or you may remove the pin to use them without lumination.
Charger not included must be purchased separately: MS00108

Replace the stock plastic blade grips with these ultra light and stiff Carbon Tail Blades. The blades are 85mm long and come with an aluminum inserts. Better tail performance and 3D control.

SAB / Miniature aircraft white Graphite tail rotor blades with CF Stripe are of very high quality and usually used in high end machines such as Ion Fury Logo 14 and others. These tail blades are super smooth ultra light and very aerodynamic. Available in multiple sizes.

MAH Carbon Fiber tail blades for Electric and Nitro Helis. MAH Blades are of superior quality and highly recommended for crisp tail control.

These micro high quality tail blades are made of light and very strong carbon. If you are looking to reduce the weight on the tail and have a super responsive tail system this is the ticket. The blades are pre weighted and 42mm in length. Root holes are pre drilled so they mount in seconds.

Modelsport Carbon Composite tail blades for high performance.

Campbell Manufacturing these V-Tail blades in 95 105 and 110 mm lengths are super strong and couple very well with the V-Main rotor blades and V-paddles. All tail rotor blades have a 5 mm root and 3 mm bolt hole and come pre weighted and balanced for superb quality / performance and ease of installation.