HeliHobby.com is your source for Remote Control RC Helicopters, products, modifications and more. Full Range of Nitro, Electric and Micro Helis in stock.
JR's first heli gyro with the holding power and constant Pirouette rate that hard-core 3D heli pilots demand.
The G770 3D gyro uses the all-new SRVS UltraLok technology to provide constant rotation rates regardless of head speed, wind or flight direction. And with its auto-trimming and anti-drift features, trim fiddling is a thing of the past. What's more, the ultra high response rate 770 3D holds like no other JR gyro. Also available as a combo with several popular JR digital tail servos to balance out your heli's tail stability and performance.
- Features:
- Constant Pirouette rate
- Both Heading-Lock and Normal modes
- Aluminum Gyro case
- Analog or Digital servo compatibility
- JR 3-Year warranty
- Specifications
- Type: SRVS UltraLok Technology 3D Gyro
- Weight: 30 gram
- Dimensions (WxLxH): 1.12 x.83 x.35 inches
- Gain Type: Heading lock and normal rate modes interlocked with Gyro Gain
- Operating Voltage: 4.8 to 6.0 V (Note: Most tail servos are limited to 4.8V)
- Reversing Switch: Yes
- High/Low Frame Rate Select: Yes
- Servo Travel Limiter: Yes
- Current Draw: 80 mA
LogicTech 6100G High Speed T/R Servo
Designed around the Logitech Gyros
Ultra High Speed Digital Tail Rotor Servo. Matches best with the LTG-6100T. (Speed: 0.05 sec/60 deg). Powerful torque which can be applied to 90 class helicopters. (Torque: 4.5kg/cm). Enhanced durability. Also available as a combo with the LTG-6100T Tail-Lock Gyro for 50 to 90 class Nitro helicopters. Part #LT-C-6100T-6100G. Experience extreme 3D flight with constant pirouette characteristics.
- Specifications:
- Applications: Heli/Gyro, 3.7-5.5V Only
- Type: Digital High Speed
- Torque @ 4.8V: 62.5 oz/in (4.5 kg/cm)
- Speed @ 4.8V: 0.05 sec/60 degrees
- Dimensions: 40mm x 38.5mm x 20mm
- Weight: 52g
- Bearings: Dual Ball Bearing
- Gears: Nylon
LogicTech LTS-3100G Servo
High Speed Digital Micro Servo. Matches best with LTG-2100T. (Speed: 0.07 s/60 deg). Features: Optimized for small electric helis (400-450 class). All-Carbonite gears. High efficiency aluminum heat-sink for effective cooling.
- Specifications:
- Torque: 1 kg/cm(13.88 oz/in) at 4.8V
- Speed: 0.07 sec/60 deg
- Dimensions: 23 x 11.4 x 24.1mm (0.91 x 0.45 x 0.94 inches)
- Weight: 9.83g (0.35 oz)
LogicTech 2100T HH Gyro for EP Helis
High performance Tail-Lock Gyro for Electric Helis. Features: Automatic scan for transmitter and receiver types. Supports dedicated servos, digital and analog. Remote controlled GAIN by transmitter. Self-diagnostic function. Can set servo limits independently(right and left). Ultralight design. Works very well on the T-Rex 450. Used with the Futaba S9650 servo, it is every bit as good as the Futaba GY401.
- Specifications:
- Operating Voltage: 4.5-5.5V
- Power Consumption: 20mA
- Input Signal 2 Channels: (Rudder, Gain)
- Output Signal: (Servo Drive)
- Gain Control: Remote Control by Tx
- Data Setting Method: Button press type
- Data Display:8 Bit LED Display
- Dimensions: 22(W) x 22 (H) x 11mm (D)
- Weight: 10g
LogicTech 6100T/6100G Tail Lock Gyro Servo combo
Get your solid tail setup on every flight
One of the best Gyro/Servo combos to come along in while that actually matches the performance of the Futaba 611. Many top pilots overseas have been putting this gyro and servo through the ringer and loving it. It won't be long until the top guys over here are running them.
