This is the X-Comp series of upgrades for all versions of the Raptor. The base plate system will make your Raptor frame extra rigid, the engine removal can be done without removing the landing gear. The G-Force X-Comp base plate features: Boom mounting location (Stronger triangular support for the tail boom), independent Landing Skid Mounting (Withstands hard landings), large engine opening (Easy removal of all 91 engines, OS and YS), engine Mount Brace (Transfers all available power to the head and keeps engine aligned with clutch bell), 6mm thick CNC Machined lightweight aluminum (Makes the bottom frame rigid), one-piece design (Minimize frame twist from hard landings) and a special base plate configuration allows for two-piece and header equipped pipes.
- Version for Raptor 30/50 V2, SE and Titan base plate
- Version for Raptor 60/90STD/90SE base plate system
- Very high quality product
- Removal of engine can be done easily through plate opening
G-Force Heli Raptor Tuner Head
Will also work on the Raptor E550 and E620SE
Precision CNC machined tuner head for the Raptor series from G-Force Heli features a new robust head design for absolutely zero flex in hard 3D flying. Uses standard o-rings for easy tuning and consistent dampening. FEATURES: Triple bolts and triple o-rings per side for rigid head mounting. Two mounting bolts for the head button to eliminate loss. Adjustable phase block. Two versions available: Raptor 30/50 V2/50SE/Titan and R60/90STD/90SE.
- Kit includes o-rings for normal and 3D flying
- Uses the d4xD8xW3 seesaw bearings from your original head
- Works with both TT plastic and metal blade grips
Elevator Control Set Raptor 30
.30 size Raptor
Upgrade your Raptor with this high quality CNC machined part from Revolution.
82.99
PART#RVO1206
- All mounting hardware and ball links included in this kit.
Elevator push/pull arm
Upgrade your Raptor with this high quality CNC machined part from Revolution.
18.99
PART#RVO1215
Flybar control rods raptor 30/50
Upgrade your Raptor with this high quality CNC machined part from Revolution.
19.99
PART#RVO1214
Stabilizer control set Raptor 30
Upgrade your Raptor with this high quality CNC machined part from Revolution.
89.99
PART#RVO1205
Metal Button Rotor Hub Raptor 50 SE
.50 size Raptor
Replace the stock plastic Hub with this precision rotor hub and remove slop in the head. Kit comes complete with spindle dampeners and pre installed precision bearings as well as extra hardware. Also available as a separate item is the Hub Slider ring for the SE.
select checkbox below:
Metal Button Rotor Hub Raptor 50 SE 89.99 Rotor Hub Slider Ring for .50 SE Head 22.89
Aileron l levers Raptor 30/50
.30 / .50 size Raptor
Upgrade your Raptor with this high quality CNC machined part from Revolution.
38.99
PART#RVO1204
Metal Lower Bearing Block (Blue) R90
Raptor .90
Another superb upgrade for the Raptor the metal upper and lower bearing blocks stiffen the complete structure of the Helicopter though out the center core and available in both blue anodized as well as standard aluminum. The bearings is of the highest quality and produce a super smooth rotor.
select checkbox below:
Metal Lower Bearing Block (Blue) R90 33.99 Metal Lower Bearing Block (Silver) R90 33.99 Metal Upper Bearing Block (Blue) R90 29.99 Metal Upper Bearing Block (Silver) R90 29.99
Raptor Main Rotor Hub 30/50
.30 / .50 size Raptor
Upgrade your Raptor with this high quality CNC machined part from Revolution.
59.99
PART#RVO1221
Raptor Head Spindle (Single)
.30 / .50 size Raptor
Any experienced flyer will tell you that no part breaks more often than a spindle since it holds the majority of main blades weight across the blade grips well this is a hardened version since you can use all the help you can get !!! Also to try and save you even more money in the long run we are offering a 10 pack spindle kit so you can crash 10 times before you ever need to worry again about ordering a spindle plus you save some money !!!
select checkbox below:
Raptor Head Spindle (Single) 5.95 Raptor Head Spindle (10 Pack) 49.95
Washout metal Raptor 30/50
.30 / .50 size Raptor
Upgrade your Raptor with this high quality CNC machined part from Revolution.
48.99
PART#RVO1203
Clutch bell HD Raptor 30/50
.30 / .50 size Raptor
Upgrade your Raptor with this high quality CNC machined part from Revolution.
16.99
PART#RVO1202
Metal tail slider raptor 30/50
.30 / .50 size Raptor
Upgrade your Raptor with this high quality CNC machined part from Revolution.
16.99
PART#RVO1201
Metal swashplate reg/ccpm r 30/50
.30 / .50 size Raptor
Upgrade your Raptor with this high quality CNC machined part from Revolution.
74.99
PART#RVO1200
Revolution Clutch heavy duty Raptor 30/50
Tired of replacing the stock Raptor clutch? Greatly improved strength and reliability. Spend time flying your Raptor not working on it. A highly recommended improvement. Upgrade your Raptor with this high quality CNC machined heavy duty spring steel clutch for the Raptor.
select checkbox below:
Revolution Clutch heavy duty Raptor 30/50 24.99 Century Clutch heavy duty Raptor 30/50 19.95
Horz fin mnt metal Raptor 30/50
.30 / .50 size Raptor
Upgrade your Raptor with this high quality CNC machined part from Revolution.
19.99
PART#RVO1210
Tail slider plate raptor 30/50
.30 / .50 size Raptor
Upgrade your Raptor with this high quality CNC machined part from Revolution.
39.99
PART#RVO1216
Engine Mount Raptor 50
.50 size Raptor
Upgrade your Raptor with this high quality CNC machined part from Revolution Products. Install it on your Raptor .50 size engine and get the coolest running engine while having an attractive stylish upgrade. Anodized gold to match RVO line of upgrades.
14.99
PART#RVO1208
Cooling Fan Raptor 50 Metal
.50 size Raptor
Raptor anodized gold series cooling fan available for the Raptor 50. The cooling fan will keep your engine the coolest it can be and the metal casing will help in dispersing heat generated from IC.
58.99
PART#RVO1207
HD Button with seesawraptor Raptor 30/50
.30 / .50 size Raptor
Upgrade your Raptor with this high quality CNC machined part from Revolution.
24.99
PART#RVO1219
Raptor Main Blade Grips 30/50
.30 / .50 size Raptor
Upgrade your Raptor with this high quality CNC machined part from Revolution.
89.99
PART#RVO1220
High tilt seesaw raptor 30/50
.30 / .50 size Raptor
Upgrade your Raptor with this high quality CNC machined part from Revolution.
26.99
PART#RVO1217
Tail pitch Lever Raptor 30/50
.30 / .50 size Raptor
Upgrade your Raptor with this high quality CNC machined part from Revolution.
18.99
PART#RVO1222
Tail boom supports Raptor .30 and .50 Gold
.30 / .90 size Raptor
Looking for a stiffer rear assembly use the carbon rods with CNC aluminum mounts to eliminate any play or flex in the boom.