 |
|
|
|
|
G-Force Heli Mixing Arms for TT Mini Titan E325
|
|
|
|
|
|
High Quality CNC
|
|
|
|
CNC machined upper mixing arm for the Mini Titan E325 are available in 2 versions. Use GFR2016 M1.6 Tapped with TT E325 M1.6 ball links and re-use your existing M2x5mm ball bearing from the plastic mixing arms. Use GFR2017 M2 Tapped with T-Rex M2 ball links and re-use your existing M2x5mm ball bearing from the plastic mixing arms. |
|
|
|
- CNC Aircraft Aluminum
- Direct Replacement
- FGR 2016 Mixing
|
|
|
|
|
|
|
|
|
|
|
|
G-Force Mini Titan E325 Tuner Head
|
|
|
|
|
|
Precision CNC part
|
|
|
|
This is the Mini Titan E325 Tuner head from G-FORCE Heli. This new head design uses triple o-rings on each side of the head like the G-Force Raptor 50 and 90 heads. Pilots can select the damper combination for their flying style. O-ring durometers 70 and 90 are included with the head kit. The head also incorporates triple clamping for the main shaft. |
|
|
|
|
|
|
- Features:
- Triple main shaft clamping.
- Triple o-ring damper on each side of the head.
- Includes six 90 duro and six duro 70 o-rings.
- GFR2015 Bulk O-ring kit includes eighteen 70-Durometer and eighteen 90-Durometer o-rings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electic Raptor (eRap) E550 Kit
|
|
|
|
|
|
The eRappy is a inexpensive and parts are readily available
|
|
|
|
Thunder Tiger delivers value with its Electric RC Helicopter, the eRaptor E550. The Raptor-E Series are based on a proven design the original Thunder Tiger Raptor Nitro Series. The Raptor E550 is equipped with the same rotor head and tail drive system of Raptor 30 v2 is migrating is easy and familiar to existing owners of the Raptor. Combined with a new frame design to adopt the electric power unit. E-CCPM (Electronic Cyclic/Collective Pitch Mixing) control system, reliable flying characteristic, with an optimized frame structure. The Raptor E550 is best entry-level electric helicopter. Uses 4 Servos ( 3 for eCCPM and one for rudder control ). Powered by a brushless motors such as the 2379 OBL 43/11-30 H) and a Brushless Speed Control such as the 8043 ACE BLC-75. Take a powerful Lithium Pack, recommended Li-poly battery 5S to 6S. |
|
|
|
|
|
|
- Full Length of fuselage: 1150mm (45.27 inch)
- Full width of fuselage: 140mm (5.51 inch)
- Total height: 390mm (15.35 inch)
- Main rotor dia: 1245mm (49 inch)
- Tail rotor dia: 237mm (9.33 inch)
- Gear ratio: 1:8.54~12.33:4.56
- Full equipped weight: 3,300g ( 7.3 lbs)
- Reliable Raptor 30 v2 rotor head and tail drive system
- Push-Pull linkage for control surface
- 90 deg E-CCPM control system (Optional 140 deg E-CCPM)
- Aluminum lower side frame
- Easy installation of rear motor mounting system
- Incline battery installation brace
- Optimize gear ratio setting
- Upgradable to E620 SE
- New Design Raptor-E Decal Set
|
|
|
:: Watch the video ::
|
|
|
|
|
|
|
|
|
|
|
Electic Raptor (eRap) 620SE Kit
|
|
|
|
|
|
The eRappy is a inexpensive and parts are readily available
|
|
|
|
Thunder Tiger delivers value with its Electric RC Helicopter, the eRaptor E620 SE. The Raptor-E Series are based on a proven design the original Thunder Tiger Raptor Nitro Series. Thunder Tiger equipped the Raptor E620 SE with E-CCPM (Electronic Cyclic/Collective Pitch Mixing) control system. Reliable flying characteristics, optimize frame structure with higher center of gravity make for more lively control response. The Thunder Tiger Raptor E620 SE the best 3D electric RC helicopter, to enjoy the extreme 3D flying. The Thunder Tiger Raptor 50 SE (Nitro Series) metal rotor head and Raptor 50 Titan longer type tail drive system. It is combined with carbon lower side frames, designed to adopt the electric power unit and provide the best power-to-weight ratio. |
|
|
| |
