The Trex 250 is the newest addition to Align’s well proven line of helis. It is powered by the 250L brushless motor and 15A ESC and comes equipped with CF frames and fins, 3.5mm main shaft, 2.5mm feathering shaft, 8.5mm boom, 205mm main blades and uses a direct-to-swash CCPM. It is designed for 3D with an all up flying weight of approximately 330g while still incorporating their quality CNC precision engineering.

The Trex 250 is the newest addition to Align’s well proven line of helis. It is powered by the 250L brushless motor and 15A ESC and comes equipped with CF frames and fins, 3.5mm main shaft, 2.5mm feathering shaft, 8.5mm boom, 205mm main blades and uses a direct-to-swash CCPM. It is designed for 3D with an all up flying weight of approximately 330g while still incorporating precision their quality CNC precision engineering.

Features:
- Newly designed main rotor head set enhanced the strength of the metal part. Utilization of high precision bearings resulting in improved stability and agility flying characteristics. Newly designed metal control lever and CCPM metal swashplate improved 3D performance.
- New anti-rotation guide, with the strengthen frame base enhanced the structure strength for the main frame.
- Newly designed servo screw retainers to simplify installation and maintenance.
- Strengthen landing skids enhanced its durability. The added skidproof screw holes make easier assembly.
- Single unit tail belt unit with the new counter weighted tail blade grips make it easier assembly and improving rudder efficiency.
- Streamlined design canopy, with colorful painting to make effectively contrast in the air.

Specifications
- Length:430mm
- Height:163mm
- Main Blade Length:205mm
- Main Rotor Diameter:460mm
- Tail Rotor Diameter:108mm
- Motor Ponion Gear:15T
- Main Drive Gear:120T
- Tail Drive Gear:28T
- Drive Gear Ratio:1:8:4.28
- Weight(w/o power system):148g
- Flying Weight:Approx 340g
- Color carton:27.3x10x6.6cm
- Outer carton:56x31x28cm ,24sets/ctn


Accessories:
- T-REX 250 Kit SetX1 set
- 200 Main bladesX1set
- 205D Carbon main bladesX1set
- RCE-BL15X 15A Brushless ESCX1 (Build-in 5~6V adjustable BEC)
- RCM-BL250SP Brushless motor(3400KV)X1
- Motor ponion gear 15TX1
- 37 Tail bladeX1set
- 40 Tail bladeX1set
- ClipX1
- 00 Philips screw driverX1
- 0.9mm Hex head wrenchX1
- 1.3 Hexagon screw driverX1
- Dial pitch gauge padX1

The Trex 250 is the newest addition to Align’s well proven line of helis. It is powered by the 250L brushless motor and 15A ESC and comes equipped with CF frames and fins, 3.5mm main shaft, 2.5mm feathering shaft, 8.5mm boom, 205mm main blades and uses a direct-to-swash CCPM. It is designed for 3D with an all up flying weight of approximately 330g while still incorporating precision their quality CNC precision engineering.

The Special Edition comes with a unique canopy and nice silver cnc head parts.

Notes from Align R/C:

Newly designed main rotor head set enhanced the strength of the metal part. Utilization of high precision bearings resulting in improved stability and agility flying characteristics. Newly designed metal control lever and CCPM metal swashplate improved 3D performance. New anti-rotation guide, with the strengthen frame base enhanced the structure strength for the main frame. Newly designed servo screw retainers to simplify installation and maintenance. Strengthen landing skids enhanced its durability. The added skid proof screw holes make easier assembly. Single unit tail belt unit with the new counter weighted tail blade grips make it easier assembly and improving rudder efficiency. Streamlined design canopy, with colorful painting to make effectively contrast in the air.

This is a package deal with the Trex 250 Super Combo, DX6i, 2 Free Lighting Power 3G 860mAh 3s lipos and the connectors you will need. That makes this a 100% complete package.

The DX6i radio by Spektrum is a great radio for r/c heli pilots allowing you up to 10 models.

The Trex 250 is the newest addition to Align’s well proven line of helis. It is powered by the 250L brushless motor and 15A ESC and comes equipped with CF frames and fins, 3.5mm main shaft, 2.5mm feathering shaft, 8.5mm boom, 205mm main blades and uses a direct-to-swash CCPM. It is designed for 3D with an all up flying weight of approximately 330g while still incorporating precision their quality CNC precision engineering.

Professionally Built
Optionally you may choose to have the kit assembled by our techs. Choosing this option you will be delivered a very professionally built helicopter setup and trimmed perfectly. Wires ran neatly, all screws thread locked and tech notes on switch assignment for your radio.