The benefit of increasing the voltage in your setup is no secret. This power package allows you to run a 6 cell lipo on your Trex 450 or other 450 class helicopter. A 6 cell lipo is much more efficient, increasing power and decreasing heat. We packaged this with quality components including the Castle Creations 50AMP LITE ESC w/Data Logging to power your motor using the built in switching BEC to run your electronics. The Lightning Power 6s 1300mah battery included in this package was specifically designed to fit a 450 class helicopter such as the Trex 450. This setup is extremely powerful but the benefits achieved by a cooler running setup yields interest from every kind of R/C heli pilot.
This package has been updated to use the new Castle Creations Phoenix ICE Lite ESC. The Phoenix ICE has built in data logging and a switching BEC which is more than adequate to power full digital servos/gyro on your 450 class heli.
This discount package comes with the following products: - CSEM6000 Lite 50A / 25V
- LP-B1133 Lightning Power 1300mAh 25C 6S1P 22.2V Li-Po 3G
- HK-2221-1630 Scorpion HK-2221-1630 V2 HK-2221-1630
- CASTLE-PHX-LINK USB Computer Programming Kit for Phoenix Controllers
- LP-C1015 Lightning Power T Style Male and Female connectors
T-Rex Tail Rotor Shaft Set
Tail Rotor Shaft Set
Trex Superior Edition ( SE ) Main Frame side frames
Align 400 size Heli Main Blade Holder/New ( AGNH1001 / HS1181 )
Hold main rotor blades in place
Two tone blue and back Main Blade Holder for 400 size helicopters such as the Trex, X-400, Zoom Shogun, Park-Mite from JR and others. Safe guards main rotor blades while carrying the Heli around.
Each set of Night Blades is carefully constructed to maintain static balance for weight. These night blades provide excellent visual orientation for flying at night, use very bright LEDS and internal rechargeable Li-Ion batteries (light weight, big capacity, long operation). FEATURES: Low voltage pre-charging. Short circuit protection. CC/CV charging method. Dynamic battery resistance compensation to reduce charging time. Dual LED indicating light / battery status.
- Includes:
- Balance sticker x 2
- Night Blade Connectors (3 pin) x 2
- Charger x 1
- AC Switching Power adapter x 1
- DC power switcher x 1
- Specs:
- Shape: Symmetrical
- Length: 325 x 32mm
- Width: 4.7mm
- Shaft Diameter: 3mm
- Weight: 52g/set
- Charger input voltage (directly connects to a lead storage battery: DC5V~12V)
- AC Switching Power adapter, Input voltage (AC 100V~240V 50Hz~60Hz)
- Charge current: Approx. 10mA( Pre-charge current: Approx. 4mA)
- Charge time: Approx. 70 mins
- Full charge voltage:Approx. 4.2V
Align T-REX Socket button head screw M2x6
Align T-REX Tail Ball Link
Align T-REX Anti Rotation Bracket
Metal Washout Base/New HS1278-1
- Metal washout base x 1
450 Landing Skid Set White
- USE for T-REX 450 SE/V2/PRO
Includes:
- Landing skid x 2
- Skid pipe x 2(Φ5.5x180mm)
- Skid pipe end cap x 4
- M2 Set screw x 4(M2x2mm)
- Hex head wrench x 1(0.9mm)
- Socket button head self tapping screw x 4(T2x10mm)
A beautifully finished woven boom and attached as a direct replacement to the stock softer aluminum boom.
The boom is very stiff and attractive.
Stiffer boom assist in the total rigidity of tail setup as well as tail control. Perfect fit and will produce the most stable center of gravity setup on the Trex 450X/XL.
Carbon works very well with the belt as it a smooth / bind free surface.
