 |
|
|
|
|
KDE ANTI-ROTATION BRACKET UPGRADE FOR ALIGN TREX 450 PRO
|
|
|
|
|
|
ALIGN TREX 450 PRO versions (replaces stock Align part #H45031)
|
|
|
|
Note: the Anti-Rotation Bracket design utilizes high-end CNC machining to produce tight and accurate tolerances throughout the part,
giving you the highest-level of flight control and accuracy available today. The design incorporates an integrated gyro mount,
providing an extremely stable mount for the precision electronics required for 3D flight.
|
|
|
|
Includes:
- One (1) TREX 450 PRO Aluminum Anti-Rotation Bracket Upgrade
- Two (2) M2.5 x 0.45 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 Black Oxide Alloy Steel)
Finish:
- Clear anodize, mirror-polish CNC gloss
Weight:
- 11g (design is FEA optimized for maximum strength and minimum weight)
|
|
|
|
|
|
|
|
|
|
|
|
KDE BATTERY MOUNT AND CANOPY CLIP UPGRADE FOR ALIGN TREX 450 PRO
|
|
|
Note: the AT450P-BMU provides superior strength to the front section of the helicopter, providing an Aluminum tray that supports the
entire length of the LiPo battery (anti-taco device!) and an Aluminum canopy clip that incorporates the front landing skid mount for
strength and critical alignment. With the new open front section design, it is now possible to tuck the ESC and LiPo wiring underneath
the tray for easier canopy placement before flight. The under section of the tray contains an open slot for the battery straps, as well as
a flat, I-beam design for ESC mounting and perfect CG alignment for 3D flight. This upgrade will truly bring your TREX 450 Pro to
the next level in performance and quality design intent.
|
|
|
|
Includes:
- One (1) TREX 450 PRO Aluminum Battery Mount Upgrade
- One (1) TREX 450 PRO Aluminum Canopy Clip Upgrade (with integrated aluminum landing skid mount)
- Six (6) M2.5 x 0.45 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 Black Oxide Alloy Steel)
Finish:
- Clear anodize, mirror-polish CNC gloss
Weight:
- Canopy Clip: 6 g (design is FEA optimized for maximum strength and minimum weight)
- Battery Tray: 13 g (design is FEA optimized for maximum strength and minimum weight)
|
|
|
|
|
|
|
|
|
|
|
|
KDE 450 PRO SERIES UPGRADE KIT FOR ALIGN TREX 450 PRO HELICOPTERS
|
|
|
|
|
|
Best CNC Upgrades on the market ~ HeliHobby Team
|
|
|
|
These are all of the KDE upgrades for the Trex 450 Super Pro / V3. It includes an extended battery tray adding more protection for your battery, better canopy clip, cnc tail servo mount and anti- rotation bracket. Besides adding some really nice bling these parts are precission cnc from 6061 Aluminum
|
|
|
|
Includes:
- One (1) TREX 450 PRO Aluminum Battery Mount and Canopy Clip Upgrade
- Six (6) M2.5 x 0.45 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 Black Oxide Alloy Steel)
- One (1) TREX 450 PRO Aluminum Tail Servo Mount Upgrade
- Eight (8) M2.5 x 0.45 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 Black Oxide Alloy Steel)
- One (1) TREX 450 PRO Aluminum Anti-Rotation Bracket Upgrade
- Two (2) M2.5 x 0.45 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 Black Oxide Alloy Steel)
|
|
|
|
|
|
|
|
|
|
|
|
KDE PERFORMANCE TAIL UPGRADE ALIGN TREX 450 PRO SPORT
|
|
|
|
|
|
ALIGN TREX 450 PRO, SPORT, SEv2, SE, SA, S, and XL versions (replaces stock Align part #HS1221)
|
|
|
|
Note: the Performance Tail Upgrade provides superior tail control for sport and hard 3D flying styles. With flanged, radial ball bearing
supported tail grips and precise machining tolerances for the brass bushing sleeve, the new design provides a slop-free,
high-performance tail that is rock-solid for all maneuvers. The design is a simple retrofit for the common Align parts on the helicopter
(replaces the stock plastic tail control links), with the ability to be used on all TREX 450 helicopters on the market. When installing
the flanged radial ball bearings, Bearing Retainer is REQUIRED between the tail control link and the outer bearing housing to
prevent loosening or separation during flight. PLEASE REVIEW THE INSTALLATION DIAGRAM ABOVE BEFORE INSTALLING.
|
|
|
|
Includes:
- Two (2) TREX 450 Aluminum Tail Control Link Upgrades
- Two (2) Flanged Radial Ball Bearings 2 x 5 x 2.5 mm
- Two (2) M2 x 0.4 x 6 mm Socket Head Cap Screws (Class 12.9 Black Phosphate Alloy Steel)
Finish:
- Clear anodize, mirror-polish CNC gloss
|
|
|
 Installation Diagram
|
|
|
|
|
|
|
|
|
KDE TAIL SERVO MOUNT UPGRADE FOR ALIGN TREX 450 PRO
|
|
|
|
|
|
Precission Quality CNC
|
|
|
|
Note: the Tail Servo Mount design provides superior tail control and frame rigidity benefits, with an aluminum 6061-T6 frame that
provides a solid foundation for the tail servo (no more stripped plastic threads!).
Models: all ALIGN TREX 450 PRO versions (replaces stock Align part #H45031)
|
|
|
|
Includes:
- One (1) TREX 450 PRO Aluminum Tail Servo Mount Upgrade
- Eight (8) M2.5 x 0.45 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 Black Oxide Alloy Steel)
Finish:
- Clear anodize, mirror-polish CNC gloss
Weight:
- 11 g (design is FEA optimized for maximum strength and minimum weight)
|
|
|
|
|
|
|
|
|
|
|
|
FES 2 BLADE SYSTEM FULL CONVERSION SET FOR 400 CLASS 5MM MAST
|
|
|
|
|
|
Complete flybarless system for 400 class helis!
|
|
|
|
This is the flybarless rotor head for 400 class helicopters with a 5mm main shaft. This is the complete set including electronics to convert your 400 class heli to flybarless. This system not only increases response but also increases flight time by removing the excess drag from the contemporary flybar systems.
|
|
|
|
|
|
Ultimate Power Pack for the 450 Class
|
|
|
|
|
|
Run a 6s Lipo on your 450!
|
|
|
|
The benefit of increasing the voltage in your setup is no secret. This power package allows you to run a 6 cell lipo on your Trex 450 or other 450 class helicopter. A 6 cell lipo is much more efficient, increasing power and decreasing heat. We packaged this with quality components including the Castle Creations 50AMP LITE ESC w/Data Logging to power your motor using the built in switching BEC to run your electronics. The Lightning Power 6s 1300mah battery included in this package was specifically designed to fit a 450 class helicopter such as the Trex 450. This setup is extremely powerful but the benefits achieved by a cooler running setup yields interest from every kind of R/C heli pilot.
This package has been updated to use the new Castle Creations Phoenix ICE Lite ESC. The Phoenix ICE has built in data logging and a switching BEC which is more than adequate to power full digital servos/gyro on your 450 class heli.
|
|
|
This discount package comes with the following products:
- CSEM6900 Lite 50A / 25V
- LP-B1133 Lightning Power 1300mAh 25C 6S1P 22.2V Li-Po 3G
- HK-2221-1630 Scorpion HK-2221-1630 V2 HK-2221-1630
- CASTLE-PHX-LINK USB Computer Programming Kit for Phoenix Controllers
- LP-C1015 Lightning Power T Style Male and Female connectors
|
|
|
450 PRO Painted Canopy
|
|
|
|
450PRO Painted Canopy A
|
|
- Painted canopy x 1
- Canopy nut x 2
|
|
|
|
|
|
|
|
|
|
|
|
Frame Hardware - Align Trex 450 Pro
|
|
- Socket button head screw x 26(M2.5x5mm)
- Socket button head screw x 2(M2.5x8mm)
- Socket button head self tapping screw x 14(T2.6x6mm)
|
|
|
|
|
|
|
|
|
|
|
|
EC-135 450 Scale Fuselage
|
|
|
|
|
|
For 400 class helis!
|
|
|
|
●EC-135 scale fuselage use for ALIGN T-REX450 helicopter series.
|
|
|
|
Specifications:
- Body length:750mm
- Body width:120mm
- Body high:275mm
- Weight:260g
- Color carton:78.9x21.7x13.6cm
- Outer carton:81x43x44.5cm ,6sets/ctn
Accessory:
- EC-135 Canopy x 1
- EC-135 Fuselage x 1
- EC-135 Window x 1
- Tip fin x 2
- Horizontal Stabilizer x 2
- Skid pipe x 2
- Skid pipe end cap x 4
- Landing skid x 2
- Plastic tube x 2(Φ4xΦ6x48mm)
- Tail boom mount x 1
- Self-tapping screw x 4(T2x8mm)
- Self-tapping screw x 4(T1.8x8mm)
- Screw x 4(M2x12mm)
- Washer x 4(Φ2.2xΦ5x0.5mm)
- Fuselage frame x 1
- Antenna accessories x 1
- CA glue x 1
- Drip rubber tube x 1
|
|
|
|
|
|
|
|
|
|
|
|
Align T-REX Autorotation tail drive gear
|
|
|
|
Main Gear Case/Black HS1228-00 450 PRO/V3
|
|
- Main gear case x 1
- One-way bearing HF0612 x 1(Φ6xΦ10x12mm)
- Cross screw x 4(M2x4mm)
|
|
|
|
|
|
|
|
|
|
|
|
V2 New Damper Rubber Black 80° HS1291
|
|
|
|
|
|
One piece dampers for your Trex 450 V2 head!!!
|
|
|
|
|
- For Trex 450 V2 with 4mm feathering shaft
- Damper rubber x 2(Φ4xΦ6.5x4mm)
- Washer x 2(Φ5.5xΦ8x0.4mm)
|
|
|
|
|
|
|
|
|
|
|
|
450 Landing Skid Set White
|
|
- USE for T-REX 450 SE/V2/PRO
Includes:
- Landing skid x 2
- Skid pipe x 2(Φ5.5x180mm)
- Skid pipe end cap x 4
- M2 Set screw x 4(M2x2mm)
- Hex head wrench x 1(0.9mm)
- Socket button head self tapping screw x 4(T2x10mm)
|
|
|
|
|
|
|
|
|
|
|
|
450V3 Main Rotor Housing Set HS1296
|
|
|
●Use for T-REX 450.
●The new V3 main rotor housing is made based on high strength precision CNC processed aluminum alloy. The new extended design will increase its sability and sensitivity.
|
|
|
|
- 450V3 Metal main rotor housing x 1
- Pin x 2(Φ1.5x18.7mm)
- Damper rubber x 2(Φ4xΦ6.5x4mm)
- Aluminum collar x 2(Φ4xΦ5.6x1mm)
- Linkage ballA(M2x3) x 2(Φ4.75x11mm)
- 450PRO Feathering shaft x 1(Φ3xΦ4x51mm)
- Washer x 2(Φ2xΦ6x0.6mm)
- Socket screw x 2(M2x6mm)
|
|
|
|
|
|
|
|
|
|
|
|
450V3 Ball Link
|
|
Specification:
- Ball link(A) x 2
- Ball link(B) x 2
Use:
- T-REX 450 V3
|
|
|
|
|
|
|
|
|
|
|
|
HP 450 Pro Tail Blades
|
|
|
Select a color from midnight black, neon yellow, neon green, and neon orange. The colorant is made to our specifications and is mixed as the blade is created. The color completely permiates the blade, and is not painted or applied. All similarly sized blades are the same weight, allowing the user to customize their tail rotor colors as desired.
Our paddles are created using a complex combination of materials which provide the perfect mix of strength and flexibility. The paddles have a very large surface area yet weigh very little.
|
|
|
|
- Length: 61mm
- Weight: 1.6g
- Designed for Trex 450 Pro
|
|
|
|
|
|
|
|
|
|
|
|
Lightning Power 325mm GF High-Performance Blades
|
|
|
325mm Glass Fiber Blades designed by Lightning Power with the goal of making a low cost 3D ready blade available. Made of High-Grade materials using a proven design these blades make a great choice over the wooden blades.
|
|
|
|
|
|
Lightning Power 325mm GF High Performance Blades - Bundle and Save
|
|
|
|
|
|
PART# LP-M0112
|
|
|
|
325mm Glass Fiber Blades designed by Lightning Power with the goal of making a low cost 3D ready blade available. Made of High-Grade materials using a proven design these blades make a great choice over the wooden blades. |
|
|
|
|
|
MicroHeli Precision CNC Battery mount and Canopy Support - Trex 450 PRO
|
|
|
|
|
|
Precission CNC and CF
|
|
|
|
This is the new carbon fiber batttery tray for ALIGN T-REX 450 PRO helicopters. It is designed to be stylish, strong and light. It is designed for easy battery strap.
|
|
|
|
Includes:
- 1 x CNC Aluminum battery tray support
- 1 x carbon fiber battery tray
- All hardware included
- Weight: 14g
Usage:
- ALIGN T
- REX 450 PRO helicopters
|
|
|
|
|
|
|
|
|
|
|
|
Main Shaft Bearing Block W THRUST BEARING SLV - TREX 450 PRO
|
|
|
|
|
|
Precission CNC Aluminum
|
|
|
|
The precision aluminum main shaft bearing block is designed with radial and thrust bearings to keep the vertical thrust load away from the radial bearings. The main shaft bearings blocks with thrust bearings will reduce the chance of bearing seizing during hard 3D manuveurs. This design is a safety feature for the ALIGN T-REX 450 PRO helicopters. However, it is also strenthening the frame and are very precise to avoid any play in bearing blocks which can cause play and glitch.
The new main shaft bearing blocks is designed so that it can be used with various popular types of servos such as HS56MG,DS410,HG-D202MG...
|
|
|
|
Includes:
- 2 x precision aluminum main shaft bearing block special designed for thrust bearings
- 2 x high quality ABEC
- 5 radial bearings
- 2 x high quality thrust bearings
Spec:
- Weight: 28.6
|
|
|
|
|
|
|
|
|
|
|
|
Carbon Fiber Anti-Rotation Guide Set - T-REX 450 PRO
|
|
|
The carbon fiber anti-rotation guide set to replace stock plastic anti-rotation guide on ALIGN T-REX 450 PRO helicopters. The anti-rotation guide comes with 1 aluminum blocks to keep the anti-rotation guide rigid.
|
|
|
|
Includes:
- 1 x Aluminum CNC aluminum guide base
- 2 x Carbon fiber anti-rotation guide parts
Specs:
- Weight: 5.1g
Usage:
- Align T-REX 450 PRO helicopters only
|
|
|
|
|
|
|
|
|
|
|
|
Precision CNC Flybarless Head System - Trex 450 PRO/SPORT
|
|
|
|
|
|
Beautiful finish, precission CNC
|
|
|
|
Flybarless Head System provides 15% more power using less parts with the Trex PRO/SPORT. The Precision CNC Flybarless Conversion Kit is designed to convert T-REX PRO/SPORT helicopter into a flybarless machine. Flybarless systems reduce the need for flybar'd systems and thus reduce weight and mechanical complexity to increase flight time and better 3D performance.
This Flybarless conversion kit is designed with reducer arms to reduce play in the head system and reduce servo loading. Precision CNC aluminum with cool Silver anodizing colors and high quanlity bearings.
|
|
|
|
Includes:
- CNC Aluminum Main Blade Grips
- CNC Aluminum Center Hub
- CNC ALuminum Flybarless Reducer Arm
- CNC Aluminum Flybarless Radius Arm
- All hardwares
Weight:
- 32g
Usage:
- T-REX 450 SPORT/SPORT and all size 450 helicotpers
Features:
- 100% Precision CNC machined Aluminum and Delrin
- Pre
- assembly 4 precision miniature bearings
- Not Using Head Button Insert for light weight
- Special reduced OD Steel Washer to prevent friction to outer ring of bearing
- Light weight designs, strong and stylish
- Use metal ball system to ensure zero slop performance
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum Tail Boom Support Brace SILVER - T-REX 450 PRO
|
|
|
The CNC aluminum tail boom brace is designed to reduce vibration on the tail boom support rods. It is a one-piece design aluminum part and it holds the two tail support rods firmly with two cap screws, making it very strong and stand out.
|
|
|
|
Includes:
- CNC Aluminum boom brace
- All screws included
Weight:
- 2.0g
Usage:
- T-REX 450 PRO helicopters
Instruction:
- Place the tail boom support brace at about half way on the boom.
Features:
- 100% Precision CNC machined Aluminum
- Adding rigidity for the tail boom support rods to reduce vibration
- Attractive and stylish design
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum Tail Boom Support - T-REX 450 PRO SPORT
|
|
|
|
|
|
Aluminum CNC end pieces are reusable!
|
|
|
|
The stylish aluminum tail support brace is needed to ensure minimum vibration and flex due to long length of the carbon rods! A must for your T-REX 450 PRO!
The aluminum tail support ends offer much more rigid than the stock plastic support ends. The support ends will be bolted securely on the heli and eleminates all the unecessary flexes. Together with high quality carbon fiber rods, the system brings best gyro function and best 3D performance for the ALIGN T-REX 450 PRO/SPORT helicopters.
|
|
|
|
Includes:
- 4 x Aluminum Tail Support Ends
- 1 x Aluminum tail support brace
- 2 x high quality carbon fiber rods 3x260mm
Requires:
- CA glue the ends of carbon fiber rods
Specs:
- Weight: 7.6g
Usage:
- T-REX 450 PRO/SPORT helicopters ONLY
|
|
|
|
|
|
|
|
|
|
|
|
Screw Set: T-REX 450 Pro
|
|
|
|
|
|
High quality replacement screw set!
|
|
|
|
RCScrewZ Stainless Screw Kits are 100% complete. Your new kit will include everything needed to do a full conversion and more. Stainless Steel Screw Kits are far superior to the screws that come stock with your RC. Our kits are made with the best stainless steel money can buy. No more bent, rusted, or corroded screws. Never worry anout stripped heads again.
|
|
| | |
