The long awaited T-Rex 500 tail blades are finally here. High quality Radix blades from Curtis Youngblood.

These blades have cosmetic defects and are being offered without warranty. I looked at a set and you could see the cosmetic blemish if you are standing right over them. These are great for anyone who needs a beater set of blades.

The Scorpion HK-3026 motors have been developed for the newer 500 and 550 class electric helicopters that are becoming so popular. These motors are designed to provide all the power that you can use, while still maintaining excellent efficiency and cool running characteristics. Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are N-50EH style, which are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use. All Scorpion HK-3026 series motors come with 3.5mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller with matching heat shrink tubing. Since the HK series motors are primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter. If you intend on running a prop on this motor, you will need to purchase a prop adapter for a 5mm shaft.

Utilizes Silicon Micro Machines (SMM) sensor with excellent stability to dramatically reduce in-flight tail drifts. Utilizes AHTCS (Active Helicopter Tail Control System) to compensate any drift caused by wind direction and force, as well as unintended yaw induced by helicopter itself during flight maneuvers. Tailor made specifically for use with high speed digital rudder servos. This gyro features high sensitivity and minimal reaction time, fully utilizing the potential of modern high speed digital rudder servos. Features 1520μs pulse wide and 760μs narrow pulse wide frame rate. Digital/Analog servo switch-able Reverse switch. Rudder servo travel limit adjustment (ATV). Delay adjustment. Gyro locking mode and gain can be adjusted remotely from the transmitter. 1.Mini/Micro heli mode, suitable for T-REX250/450(STATUS Red). Medium/large heli mode, suitable for T-REX500/600/700(STATUS Green).

The DS520 features a coreless Motor Design for fast speed, high efficiency, and low power consumption. 10 Bits signal resolution for smooth movements. Response time of 0.07s/60 deg. High strength composite alloy gears with high precision and durable structure characteristics. Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo's high efficiency. Supports digital and analog control signal. Powerful and precise servo suitable for T-Rex 500 CCPM cyclic and rudder servo use.

Note: the Performance Tail Upgrade provides superior tail control for sport and hard 3D flying styles. With flanged, radial ball bearing supported tail grips and precise machining tolerances for the brass bushing sleeve, the new design provides a slop-free, high-performance tail that is rock-solid for all maneuvers. The design is a simple retrofit for the common Align parts on the helicopter (replaces the stock plastic tail control links), with the ability to be used on all TREX 500 helicopters on the market. When installing the flanged radial ball bearings, Bearing Retainer is REQUIRED between the tail control link and the outer bearing housing to prevent loosening or separation during flight. PLEASE REVIEW THE INSTALLATION DIAGRAM ABOVE BEFORE INSTALLING.

The G-Force Static Wick dissipates excess static build up that is partly caused by a belt driven heli or the tail blades. The static wick can also reduce possible interference to receivers especially for the 2.4Ghz. High enough static could cause a complete 2.4Ghz lockout. Complete bolt on kit with installation instructions.

The finned motor mount for the T-Rex 500 is designed to dissipate additional heat from the motor casing. Ideal for setups using 6s batteries and hot running motors. FEATURES: CNC machined from billet. Deep fins for rapid heat dissipation. Silver anodized.

The G-Force ESD plate is a bolt-on upgrade that will electrically ground the tail boom and belt to a CF frame. This will reduce the interference that is caused by static generated by the belt and tail blades. The ESD plate is most effective when used with a CF frame. When used on a GF frame, only the tail boom and belt is ground together. It is highly recommended that the G-Force Static Wick (Part #GFA7088) to be used with the G-Force ESD Plate to discharge the static quickly into the atmosphere. Bolt on installation with complete instructions.